紫外辐照-催化湿式过氧化氢氧化技术处理酸性大红GR染料废水

采用自制的负载型CuO-ZnO-CeO2/γ-Al2O3催化剂,常温常压下通过紫外辐照-催化湿式氧化技术处理酸性大红GR模拟染料废水。考察了催化剂加入量、H2O2加入量、废水pH、反应时间、初始酸性大红GR质量浓度等对废水脱色率的影响。实验得到最佳工艺条件为初始酸性大红GR质量浓度200mg/L,催化剂加入量10.0g/L,H2O2加入量2.0mL/L,废水pH4,反应时间2h。最佳工艺条件下废水脱色率达99.33%。     

Fe~(3+)和Cu~(2+)对饮用水氯消毒副产物三卤甲烷形成的影响

为了研究水中存在Br-的情况下,Fe3+和Cu2+对三卤甲烷(THMs)的生成及CHCl3、CHBr Cl2、CHBr2Cl、CHBr34种消毒副产物相对分布的影响,以腐殖酸模拟氯消毒过程中的前体物进行实验。结果表明,在p H为6、7和9 3种条件下,Fe3+抑制了THMs的生成,p H=6时只有CHCl3生成量随着Fe3+浓度的增加逐渐减少,其余3种消毒副产物均在增加,p H=7时4种消毒副产物浓度均减小并在Fe3+浓度为2 mg/L时生成量最低,p H=9时的生成趋势与p H=6时类似。Cu2+能促进THMs的生成,在p H为6、7和9时,当加入0.5 mg/L Cu2+时,THMs总量分别增加了16.7%、22.6%和2.5%,随着p H增加,THMs总量增加。在3种p H环境中,Cu2+对THMs生成的影响大于Fe3+,在偏酸性环境中,Fe3+影响THMs生成,产生的致癌风险高,当金属离子浓度为2.5 mg/L时,致癌风险相差最高为15%,在中性和偏碱性环境中,Cu2+影响THMs生成,产生的致癌风险高。     

INACTIVATION OF GIARDIA MURIS CYSTS BY CHLORAMINES1

ABSTRACT: In a study to measure the efficacy of chioramines at inactivating Giardia cysts, the ability of cysts to excyst was measured after exposure to different concentrations of chloramines, for different times, and at different temperatures and pH. The chloramines were generated by mixing ammonium sulfate and sodium hypochlorate in water to approximate a 7:1 chlorine:ammonia ratio by weight. Times of 40, 80, 180, and 270 minutes; temperatures of 3, 10, and 18°C; target chioramine concentrations of 0.4, 1.4, 2.0, and 2.6 mg/L; and pH of 7.0 and 8.5 were the actual values tested. The combinations of these variables that were able to inactivate >99.8 percent of the cysts were a minimum chloramine concentration of 2.26 mg/L applied for 270 minutes at a water temperature of 10°C; and at 18°C, averaged minimum chloramine concentrations of 2.14 and 1.55 mg/L applied for 180 and 270 minutes, respectively. The minimum CT values corresponding to these combinations capable of >99.8 percent cyst inactivation, are 610 at 10°C and 385 at 18°C. Temperature was noted to exert a major effect on the ability of chloramines to inactivate cysts. Modifications of the methods used to generate chloramines may have an effect on the capacity of this disinfectant to inactivate cysts.     

紫外光谱结合正交试验设计同时测定水中苯系物

利用正交试验设计,以光谱预处理、特征筛选及多元校正方法为考察因素,每个因素的4种不同方法为水平,确定了水中3种苯系物（苯酚、苯胺及苯甲酸）紫外光谱数据的最佳分析方法,从而建立了其定量校正模型。对于苯酚、苯胺及苯甲酸,其光谱预处理、特征筛选及多元校正分别采用一阶导数+无信息变量消除法（UVE）+偏最小二乘回归（PLSR）,Savitzky-Golay平滑+变量结合种群分析法（VCPA）+PLSR,Savitzky-Golay平滑+移动窗口偏最小二乘法（MWPLS）+PLSR。在独立测试集上3组分的预测误差均方根（RMSEP）分别为0.809 4、0.796 3和0.945 4。水样加标回收实验的回收率为97.79%~103.84%,相对标准偏差（RSD）小于3%。该方法可作为一种同时测定水中苯系物的简便有效方法。     

山东潍坊紫外线辐射特征及影响因素

近10多年来,随着人类居住环境的恶化,紫外线给人类造成了巨大的伤害。利用潍坊市气象台2004~2006年逐日紫外线观测资料,分析了太阳紫外线辐射到达地面的强度指数和等级,同时分析了这些量的年、月、日变化特征,研究了影响紫外线辐射的主要的几种因子。影响紫外线辐射强度的主要因素是臭氧、地表反射率、大气气溶胶和云,这些影响因素的变化对太阳紫外线到达地面的辐射起着举足轻重的作用。     

BACTERIAL RELATIONSHIPS IN STORMWATERS1

ABSTRACT: Data were developed within a three-year period for indicator bacteria and three species of bacterial pathogens following rural storm event hydrographs. The first flush concept was confirmed in all hydrographs. Bacterial density peaking occurred at or before the hydrograph peaks. FC and FS values were higher in more developed areas than the primary rural test site and their numerical ratios followed similar trends. Chlorine demand of storm waters varied between 8 and 16 mg/l and, the ozone requirement was greater than 32 mg/l in the same waters. Aftergrowth of total coliform bacteria occurred following chlorine and ozone doses of 16 mg/l and 32 mg/l respectively. Fecal coliform, fecal streptococci, Salmonella sp., and Pseudomonas sp. all were reduced to near detectable limits by the disinfectants up to 8 days. Staphylococcus sp. demonstrated a propensity to restablish their populations. Multiple regression analysis of the bacterial groups and species in storm waters suggested the fecal streptococci to have been the most useful group in evaluating bacterial storm water quality, with staphylocci have been closely related insofar as their statistical significance was concerned.     

Analysis of trace dicyandiamide in stream water using solid phase extraction and liquid chromatography UV spectrometry

An improved method for trace level quantification of dicyandiamide in stream water has been developed. This method includes sample pretreatment using solid phase extraction. The extraction procedure (including loading, washing, and eluting) used a flow rate of 1.0 mL/min, and dicyandiamide was eluted with 20 mL of a methanol/acetonitrile mixture (V/V = 2:3), followed by pre-concentration using nitrogen evaporation and analysis with high performance liquid chromatography–ultraviolet spectroscopy (HPLC–UV). Sample extraction was carried out using a Waters Sep-Pak AC-2 Cartridge (with activated carbon). Separation was achieved on a ZIC^®-Hydrophilic Interaction Liquid Chromatography (ZIC-HILIC) (50 mm × 2.1 mm, 3.5 μm) chromatography column and quantification was accomplished based on UV absorbance. A reliable linear relationship was obtained for the calibration curve using standard solutions (R² > 0.999). Recoveries for dicyandiamide ranged from 84.6% to 96.8%, and the relative standard deviations (RSDs, n = 3) were below 6.1% with a detection limit of 5.0 ng/mL for stream water samples.     

Application of cavitational reactors for water disinfection: current status and path forward

Cavitational reactors are a novel and promising form of multiphase reactors, based on the principle of release of large magnitude of energy due to the violent collapse of the cavities. An overview of cavitational reactors in the specific area of water disinfection, in terms of the basic mechanism, different reactor designs including recommendations for optimum operating parameters and applicability of the cavitation phenomena for disinfection of different micro-organisms have been presented. A design of a pilot scale sonochemical reactor has been presented, which forms the basis for development of industrial scale reactors. Economic analysis for comparison of cavitation phenomena with other conventional techniques of disinfection has been discussed. It appears that though cavitation is quite successful in treatment of water at laboratory scale operations, comparatively higher cost of treatment as compared to the conventional chemical methods is a hindrance in its industrial scale application. Intensification of cavitational activity and efficient design of industrial scale hydrodynamic cavitation reactors is required for ensuring successful application of cavitational reactors at industrial scale operation.     

Identification of unknown disinfection byproducts in drinking water produced from Taihu Lake source water

Although disinfection byproducts(DBPs) in drinking water have been suggested as a cancer causing factor, the causative compounds have not yet been clarified. In this study, we used liquid chromatography quadrupole-time-of-flight spectrometry(LC-QTOF MS) to identify the unknown disinfection byproducts(DBPs) in drinking water produced from Taihu Lake source water, which is known as a convergence point for the anthropogenic pollutants discharged from intensive industrial activities in the surroundi...