城市生态系统承载理论探索与实证--以长江三角洲为例

为深入地探讨城市生态系统内部各要素的相互作用关系,将自然生态系统承载力理论扩展到城市生态系统,提出城市生态系统的承载机制概念。分别从微观作用与宏观表现两个角度提出承载机制模型,即承载递阶模型与水桶模型,初步构建了承载理论框架。在承载理论指导下,采用层次结构模型建立了承载机制评价指标体系,提出承载机制定量评估模型,由此可计算出城市生态系统承载指数,该指数是研究资源支持系统、环境约束系统与社会经济活动三者协调性以及城市生态环境对社会经济活动供容能力的重要判据。最后对长三角具有代表性的8个城市进行了实证研究。结果表明：长三角8个^城市的综合承载指数排序依次为：上海、南京、无锡、宁波、杭州、苏州、常州、扬州。     

基于苔藓氮含量及d15N分析探讨农村大气氮沉降状况

2009~2010年在江西抚州市崇仁县10个乡镇采集了85个细叶小羽藓样品,通过对苔藓氮含量及氮同位素(d15N)的测定,估算了该地区大气氮沉降水平,并探讨了大气氮输入的主要来源.结果表明,研究区苔藓平均氮含量变化范围为2.24%~3.43%,其中农业覆盖率较大郭圩乡和礼陂镇苔藓氮含量均超过3%(平均值分别为3.07%、3.43%).研究区大气氮沉降的变化范围为29.62~54.39kg/(hm2·a),反映了大气氮沉降成为农村生态系统氮输入的重要补充.苔藓平均d15N值为-3.11‰~0.078‰,指示研究区主要受农业氨源的影响.崇仁县城区苔藓d15N为-1.7‰,低于其它农业乡镇(d15N为0‰±1‰),表明该地区还受到城市污水和人畜排泄物所释放的氨影响;孙坊镇苔藓d15N 变化范围为-5.89‰~0.61‰,提示大气氮沉降除受到农业排放的氨作用以外,还存在露天垃圾填埋场挥发氨的贡献.     

“城市矿产”开发是循环经济的永恒亮点

“城市矿产”使城市成为资源循环利用的开发基地。“城市矿产”的开发是在国家指导、规划和资金投入的支持下进行,是缓解我国资源和环境压力,提高环境效益、经济效益和社会效益的多赢举措     

湖北省随县农村居民点整治现实潜力测算及整治策略——基于农户意愿的调查分析

农村居民点整治是土地整治规划的核心问题。研究采用实地调查法和多因素综合评价法,在统筹国家政策、农户意愿和建立自然-经济-社会-生态-规划综合修正指标体系的基础上,科学测算了随县各乡镇农村居民点整治现实潜力,并提出适宜整治策略。研究结果:①随县18个乡镇综合修正系数介于5.15%~9.84%之间,表明理论潜力转变为现实潜力的可能性具有较大地域差异;②2011-2020年随县农村居民点整治现实潜力为2 035.23 hm²,占理论潜力的17.80%,占现状农村居民点用地面积的10.01%;③可优先在潜力大的乡镇建立整治示范区,创新土地整治模式,有序推进农村居民点整治。该研究测算方法及整治策略具有一定的科学性和实用性,可为新一轮农村居民点整治提供更为有效的依据和参考。     

基于城市土地产业属性的面积分摊计算方法研究——以合肥市为例

现有土地分类对城市第二三产业用地划分过于粗略,与国民经济行业分类缺乏有效衔接,导致无法准确掌握城市各类第二三产业用地类型与面积。论文通过引入经济普查数据,把产业单位经济属性赋予土地,在现有土地分类的基础上将城市第二三产业用地类型进一步细分,与国民经济分类衔接。以合肥市为例,应用面积分摊计算方法,通过计算推算分摊系数、推算分摊面积和实际分摊面积得到各类型产业用地面积和产业用地总面积,同时绘制产业用地分布图。将分摊面积与相关标准、数据比较,结果显示:第一,合肥市工业用地实际使用率为94%,还有进一步提高的空间;第二,合肥市工业用地占城市建设用地的15.52%,比例偏低;第三,部分工业企业布局不合理。研究结论表明面积分摊计算方法能够为产业用地评价提供数据基础,为产业用地结构调整和布局优化提供有用指导。     

基于径向基函数神经网络方法的城市生态压力预测

针对城市生态压力影响因素复杂,难以对城市未来可持续发展状况做出准确判断的问题,提出了城市生态压力的径向基函数神经网络预测模型,分析了影响城市生态系统的主要因素.以抚顺市1995-2009年数据为基础,验证了模型的准确性并预测了该市2010-2015年城市生态系统的压力情况.研究结果表明:能源消耗指标是影响城市生态系统压力的主要因素;运用径向基函数神经网络模型对训练样本的拟合精度以及对测试样本的仿真精度分别达97.91%和94.16%;抚顺市2015年的人均生态足迹、 生态承载力和生态赤字分别达到7.013、 0.523和6.49 hm²/人.     

Modelling the kinetics and equilibrium properties of cadmium biosorption by river green alga and water hyacinth weed

Cadmium biosorption properties of non-living, dried river green alga from a river source, and water hyacinth weed, Eichhornia crassipes from a lake in Zimbabwe have been investigated. The cadmium uptake was found to depend on initial pH, uptake being apparently minimal at low pH values and increasing with an increase in pH. Cadmium biosorption kinetics by both samples is fast, with 80% of total uptake occurring within 60?min. The effect of initial solution pH and initial cadmium concentration on cadmium biosorption from a cadmium solution has been studied. The data for algal biomass fitted the Langmuir monolayer adsorption isotherm, while the biosorption of the metal by water hyacinth weed fitted the Freundlich adsorption isotherm with 1/n values all less than 1. Maximum metal uptake capacities were recorded using 0.35?g of biomass and a 250?mg?L^?1 cadmium solution at pH 6.5 and at 25°C and these were about 85 and 50?mg?L^?1 for water hyacinth weed and green alga, respectively, showing that water hyacinth weed offered a greater potential for cadmium uptake. The absorption was described by pseudo-second order rate model and the rate constant and equilibrium sorption capacity are reported.     

Influence of manufacturing process on the residues of certain fungicides used on tea

Green tea shoots which were sprayed with fungicides such as hexaconazole, propiconazole, carbendazim, and tridemorph were collected from tea bushes after 24 h of fungicide application to study the effect of manufacturing process on the residues. Significant loss of residues was noted at each stage of the manufacturing process. The total loss in residues upon manufacturing of these fungicides ranged from 12.20% to 57.14%. Among the various influential factors that determine the loss of residues, vapor pressure of the fungicides was most prominent in the contribution to residue loss. A high vapor pressure of the fungicide tridemorph amounted to a residue loss of 57.14%, while the low vapor pressure of the other three fungicides caused a loss of less than 22.22%.     

Cadmium accumulation by green algae Cladophora glomerata (L.) Kutz. (Chlorophyta) in presence of Nile tilapia Oreochromis niloticus (L.)

Accumulation of metals by aquatic organisms is mostly affected by other biological components in environments. In this study, cadmium (Cd) accumulation in green algae, Cladophora glomerata (L.) Kutz., exposed to 0.1 and 1.0 mg L^?1 of Cd for 15 and 30 days was examined in laboratory conditions in the presence of Nile tilapia Oreochromis niloticus (L.). The green algae C. glomerata accumulated Cd concentrations as 690 ± 70 and 3430 ± 470 mg kg^?1 on day 15, and 1130 ± 180 and 6830 ± 1540 mg kg^?1 on day 30. There were significant increases (p < 0.05) in metal accumulation by green algae as the exposure time and metal concentration increased. The results also indicated that the presence of Nile tilapia in the medium led to a significant Cd accumulation in the green algae compared to control (p < 0.05).     

Metal removal with two biochars made from municipal organic waste: adsorptive characterization and surface complexation modeling

The adsorptive characteristics of biochar produced from garden green waste (S-char) and a mixture of food waste and garden green waste (FS-char) were investigated. Adsorption of Cu²⁺, Zn²⁺, and Mn²⁺ onto the two biochars reached equilibrium within 48 hours. The metal adsorption was effectively described by the pseudo-second-order kinetic and Freundlich isotherm models which suggest heterogeneous chemisorption. The initial solution pH influenced adsorption of Zn²⁺ and Mn²⁺ but not of Cu²⁺. Simulation via a surface complexation model showed that the fraction of XOCu⁺ adsorbed onto biochar was increased with increasing pH until it reached the adsorption maximum at pH 8.5, while the endpoint for the maximum of XOMn⁺ was higher than pH 12.