建筑围护结构节能与防火体系构建

从围护结构节能与防火一体化思路出发,提倡钢筋混凝土结构保温一体化建筑体系和砌体结构保温一体化建筑体系;尤其主张在我国建筑工业化全面升级的基础上大力开发与推广保温型混凝土预制装配化技术,统一建筑模数,实现标准化与多样化;针对预制装配化保温型混凝土在梁、构造柱等容易出现的冷、热桥问题的部位,创新式提出以相变储能材料与建筑结构相融合来提高建这些部位的热工性能,减少温度梯度;从系统上做到保温与建筑同寿命、免维护、工序少,工期短、耐火等,从而真正实现低碳,构建建筑围护结构节能防火一体化建筑体系。     

喷嘴角度对脱硫塔内气液两相流场的影响

提出了采用数值模拟的方法研究喷嘴角度对脱硫塔内部气液两相流场的影响。由于实际脱硫塔尺寸庞大,给实验研究带来困难且成本很高,在数值模拟平台上,分别模拟了45°、75°和-30°3种喷嘴角度布置下脱硫塔内部速度场、温度场变化以及湍流强度的分布情况。结果表明,在角度为-30°布置时速度场变化不是很剧烈,脱硫塔进出口温差比较理想,湍流强度在脱硫塔底部较大随着塔高的增加缓慢降低,这样有助于气液两相均匀混合,并控制出口烟温,有利于提高脱硫效率。     

固相萃取气相色谱法测定水中痕量六六六和滴滴涕

建立了固相萃取气相色谱测定水质中六六六、滴滴涕的方法,详尽地叙述了水样预处理过程。方法检测限较低,α六六六和γ六六六为1ng/L,β六六六、δ六六六和pp′DDE为2ng/L,op′DDT和pp′DDT为3ng/L,pp′DDD为4ng/L。加标回收率在88%～93%之间,回收较好,相对标准差均<2.5%,精密度好。方法快速、简便,避免了液液萃取的繁多手续。     

焦炉工人PAHs空气日均暴露浓度分析

用个体采样器对100名受试者进行了可吸入颗粒物和气态样品的24h跟踪采集,并通过梯度洗脱一反相HPLC／可编程序荧光检测法定量分析了样品中14种多环芳烃。结果表明,不同受试人员多环芳烃空气日均暴露浓度存在很大差异,其中焦炉工人受多环芳烃中BaP空气日均暴露浓度为0．5μg／m^3～1．7μg／m^3,炼纲厂工作人员和清洁区办公人员的BaP空气日均暴露浓度分别为0．02μg／m^3和0．01μg／m^3。不同受试人员多环芳烃空气日均暴露在PM10及气相中的分配比例也略有不同,焦炉工人的BaP空气日均暴露浓度有近99％来自PM10,一般人群为93％左右。指出2环、3环多环芳烃主要以气态形式存在,4环至6环多环芳烃主要分布在PM10中。     

萃取第三相形成过程中废水处理的去污机理

用漏斗试验法研究了［β－萘磺酸＋劳伦酸（钠）］－水－三辛胺（煤油）体系的萃取去污机理,结果表明,在萃取过程中除水溶性β－萘磺酸和劳伦酸的可溶部分各自与三辛胺萃取剂反应生成胺盐,并进一步聚合后形成萃取第三相外,劳伦酸的悬浮颗粒部分被第三相粘结除去,劳伦酸钠以分子形态被第三相吸附除去。并在合适的萃取条件下所涉及体系以COD计的去污率可达到95％左右。由此提出＂萃取－混凝－浮上＂的去污机理。     

水解-三相生物流化床处理生活污水的研讨

通过对水解－三相生物流化床处理生活污水的实验研究,以探求降低曝气池、水解池高度的可能性;同时对载体的沉降规律作动力学分析,建立载体免于流失的出流控制流速方程式,为设计运转提出理论依据。     

可持续发展的理论与宏观调控模式

从可持续发展观和可持续发展战略出发,分析了传统发展观和发展模式的特点及其主要弊端;进而根据有关国际性文件中的可持续发展概念,给出了中国人易于理解的描述及其基本内涵,强调了人与自然和谐、发展与资源环境相协调是可持续发展的核心,并结合实例阐明了协同学理论是可持续发展的基本理论依据;在分析发展与资源环境相协调的基础条件之后,重点论述了它们之间的协调机制,提出了可持续发展的宏观调控模式。      

Characterization of the Leachate in an Urban Landfill by Physicochemical Analysis and Solid Phase Microextraction-GC/MS

The aim of this study is to evaluate extensively the characterization and identification of major pollutant parameters by paying attention to the organic chemical pollution for unregulated dumping site leachate in Eskişehir/Turkey. The study that is first and only one research has been very important data related with before new sanitary landfill site in Eskişehir city. For this purpose, in this study leachate samples were collected in-situ at monthly interval for a period of 8 months. Firstly, thirty three physicochemical parameters were monitored. Secondly, SPME technique was used for identification of organic pollutants. Meteorological data were also recorded for the same sampling period to correlate meteorological data and physicochemical parameters. Mean values are used in the correlation analysis. Correlation is shown only for the relationship between air temperature and NO₃ ⁻. No correlation has been found between rain and leachate quality parameters since the amount of rain was very low during the sampling period. However, analysis results were generally decreased in winter season when each parameter and each sampling point are examined separately. According to correlation between every parameter, especially solid content and dissolved oxygen concentration of leachate is affecting to other parameters. Also, sodium and potassium are changing proportionally with same parameters (suspended solids, fixed solids, dissolved oxygen) and high correlation between chloride and heavy metal concentration is showing. The results were statistically evaluated by use of SPSS 10.0 program. Second part of the study, the leachate was extracted by Solid Phase Microextraction (SPME) technique and then analyzed. Of the methodologies tested in this study, the best one selected was based on 100 μ m polydimethylsiloxane coated fiber (PDMS), headspace with heating (Δ HS) sampling mode and an extraction time of 15 min. at a temperature of 50 ^o C. Thirty three organic compounds in leachate were identified by GC/MS.     

Determination of volatile organic compounds in river water by solid phase extraction and gas chromatography

A simple, rapid, and reproducible method is described employing solid-phase extraction (SPE) using dichloromethane followed by gas chromatography (GC) with flame ionization detection (FID) for determination of volatile organic compound(VOC) from the Buriganga River water of Bangladesh. The method was applied to detect the benzene, toluene, ethylbenzene, xylene and cumene(BTEXC) in the sample collected from the surface or 15cm depth of water. Two-hundred ml of n-hexane-pretreated and filtered water samples were applied directly to a C18 SPE column. BTEXC were extracted with dichloromethane and average concentrations were obtained as 0. 104 to 0.372 μg/ml. The highest concentration of benzene was found as 0.372 μg/ml with a relative standard deviation (RSD) of 6.2%, and cumene was not detected. Factors influencing SPE e.g., adsorbent types, sample load volume, eluting solvent, headspace and temperatures, were investigated. A cartridge containing a C18 adsorbent and using dichloromethane gave better performance for extraction of BTEXC from water. Average recoveries exceedina 90% could be achieved for cumene at 4℃ with a 2.7% RSD.     

产酸相最佳发酵类型工程控制对策

对二相厌氧消化工艺的研究证明,产酸发酵阶段对整个厌氧生物处理系统运行的成败起着关键的作用,作为产酸发酵三种类型之一的乙醇型发酵被证明是产酸相的最佳发酵类型。采用连续流二相厌氧生物处理系统,对产酸相乙醇型发酵在实际工程中能够直接控制的运行参数进行了研究与探讨。试验结果表明,产酸相乙醇型发酵的最佳参数：温度为34～38℃,pH为4.0～4.4,Eh为－300～－400mV,HRT为5～6h;污泥负荷应不大于4gCOD/gVSS·d,以2.5gCOD/gVSS·d最佳。