不同生物接触氧化方法对藻类的去除效果比较及其途径分析

比较了3种生物接触氧化法对富营养化水源水中藻类的去除效果，探讨其去除藻类的途径。试验结果表明：淹没式曝气生物陶粒滤池（I型）在4-6m/h过滤速度条件下，对藻类总数的去除效率稳定，平均为70%左右；采用YDT弹性立体填料的中心导流筒曝气生物接触氧化法（Ⅱ型）与直接微孔曝气生物接触氧化法（Ⅲ型），在试验初期对藻类总数的去除率较低，平均去除率分别为60.2%、51.6%。但随着生物膜厚度的增加，试验后期对藻类的去除效果逐步得到提高，平均达70%以上。生物膜对藻类的生物絮凝、吸附、生物膜的脱落沉降等是生物接触氧化法去除藻类的主要途径。     

气相色谱法测定二硫化碳和甲硫醚

利用气相色谱(配火焰光度检测器,采用3mxφ2mm玻璃填充柱分离)对CS2和甲硫醚(DMS)两种含硫化合物进行了分离检测。该方法具有较高的灵敏度和良好的线性关系。结果表明:该分析对含硫气体的最小检测浓度在mg/m3级,在柱温为70℃,检测器温度为180℃,气化室温度为150℃,氮气流速为50mL/min时,CS2的回收率为98.66%,变异系数为2.12%;甲硫醚的回收率为98.66%,变异系数为1.56%。     

脉冲电晕等离子体脱硫脱氮与除尘技术

脉冲电晕放电是产生等离子体的方法之一，目前已达到工业性试验阶段，该文对脉冲电晕等离子脱硫脱氮与除尘技术的形成过程进行了回顾，对其理论作了分析，并简介了工艺流程，还指出了目前存在的主要问题和需研究的关键技术。     

医疗废物焚烧残余物固化技术初探

根据对医疗废物焚烧残余物中有毒有害物质的化验分析结果,确定焚烧残余物中有毒有害成分含量仍较高,部分指标超出标准值,必须对其进行稳定化/固化处理,避免对土壤及地下水环境造成污染.本文阐述了稳定化/固化处理原理及处理工艺,使医疗废物无害化、减量化和资源化的处理原则得以全面实现.     

水葫芦对Zn2+、Cd2+和Fe3+的去除速率

通过静态水培实验和原子吸收分光光度法的测定,发现水葫芦对个别重金属离子累积去除率头两天为Zn≈Cd>Fe,以后为Fe>Zn>Cd;5天中,Cd2 在水葫芦老黄茎叶中的积累量增长了130 0倍;在混合离子培养液中,Zn2 的去除速率明显下降,而Cd2 和Fe3 变化不明显。表明水葫芦在治理含镉废水方面有良好的应用前景。     

胶粉的生产利用现状及前景分析

废橡胶作为工业垃圾 ,已为世界所公认 ,介绍了废橡胶回收利用的意义和方法 ,着重阐述了胶粉的生产利用现状 ,并简要分析了胶粉的生产利用前景     

Developing Canada's National Forest Carbon Monitoring, Accounting and Reporting System to Meet the Reporting Requirements of the Kyoto Protocol

The rate of carbon accumulation in the atmosphere can be reduced by decreasing emissions from the burning of fossil fuels and by increasing the net uptake (or reducing the net loss) of carbon in terrestrial (and aquatic) ecosystems. The Kyoto Protocol addresses both the release and uptake of carbon. Canada is developing a National Forest Carbon Monitoring, Accounting and Reporting System in support of its international obligations to report greenhouse gas sources and sinks. This system employs forest-inventory data, growth and yield information, and statistics on natural disturbances, management actions and land-use change to estimate forest carbon stocks, changes in carbon stocks, and emissions of non-CO₂ greenhouse gases. A key component of the system is the Carbon Budget Model of the Canadian Forest Sector (CBM-CFS). The model is undergoing extensive revisions to enable analyses at four spatial scales (national, provincial, forest management unit and stand) and in annual time steps. The model and the supporting databases can be used to assess carbon-stock changes between 1990 and the present, and to predict future carbon-stock changes based on scenarios of future disturbance rates and management actions.     

浅谈原子吸收分光光度计在环境监测中的应用

本文介绍了原子吸收分光光度计在环境监测中的应用情况和重要性。分析了原子吸收光度法（包括石墨炉法）与ICP-AES（电感偶合等离子体发射光谱法），原子荧光法，极谱法在分析元素时各自的优缺点，又从目前环境监测的角度阐述了应用原子吸收分光度计的重要性与现实性。分析了原子吸收分光广度计在使用中的常见问题及原子吸收分光广度法分析中常出现的问题（从仪器、方法角度分别讲述）。并提出了原子吸收分光度计要进一步应适应环境监测的需求。     

Carbon Dioxide Balance of Wood Substitution: Comparing Concrete- and Wood-Framed Buildings

In this study a method is suggested to compare the net carbon dioxide (CO₂) emission from the construction of concrete- and wood-framed buildings. The method is then applied to two buildings in Sweden and Finland constructed with wood frames, compared with functionally equivalent buildings constructed with concrete frames. Carbon accounting includes: emissions due to fossil fuel use in the production of building materials; the replacement of fossil fuels by biomass residues from logging, wood processing, construction and demolition; carbon stock changes in forests and buildings; and cement process reactions. The results show that wood-framed construction requires less energy, and emits less CO₂ to the atmosphere, than concrete-framed construction. The lifecycle emission difference between the wood- and concrete-framed buildings ranges from 30 to 130 kg C per m² of floor area. Hence, a net reduction of CO₂ emission can be obtained by increasing the proportion of wood-based building materials, relative to concrete materials. The benefits would be greatest if the biomass residues resulting from the production of the wood building materials were fully used in energy supply systems. The carbon mitigation efficiency, expressed in terms of biomass used per unit of reduced carbon emission, is considerably better if the wood is used to replace concrete building material than if the wood is used directly as biofuel.     

氨法烟气脱硫脱硝的技术特征

氨法烟气脱硫脱硝具有显著的技术优势:脱硫效率高,脱硫脱硝一举两得,不耗费热量不产生废渣,脱硫剂利用充分用量小,不损害设备有节能功效。脱硫剂利用率可达90%以上,脱硫效率可达90%以上、脱硝效率可达80%以上;脱硫剂用量是钙法工艺的十到二十分之一;副产物为可以直接利用的化学肥料,而非难于处置的废渣。