Defining the Impact of Non‐Native Species

Non‐native species cause changes in the ecosystems to which they are introduced. These changes, or some of them, are usually termed impacts; they can be manifold and potentially damaging to ecosystems and biodiversity. However, the impacts of most non‐native species are poorly understood, and a synthesis of available information is being hindered because authors often do not clearly define impact. We argue that explicitly defining the impact of non‐native species will promote progress toward a better understanding of the implications of changes to biodiversity and ecosystems caused by non‐native species; help disentangle which aspects of scientific debates about non‐native species are due to disparate definitions and which represent true scientific discord; and improve communication between scientists from different research disciplines and between scientists, managers, and policy makers. For these reasons and based on examples from the literature, we devised seven key questions that fall into 4 categories: directionality, classification and measurement, ecological or socio‐economic changes, and scale. These questions should help in formulating clear and practical definitions of impact to suit specific scientific, stakeholder, or legislative contexts. Definiendo el Impacto de las Especies No‐Nativas     

The role of digital data entry in participatory environmental monitoring

Many argue that monitoring conducted exclusively by scientists is insufficient to address ongoing environmental challenges. One solution entails the use of mobile digital devices in participatory monitoring (PM) programs. But how digital data entry affects programs with varying levels of stakeholder participation, from nonscientists collecting field data to nonscientists administering every step of a monitoring program, remains unclear. We reviewed the successes, in terms of management interventions and sustainability, of 107 monitoring programs described in the literature (hereafter programs) and compared these with case studies from our PM experiences in Australia, Canada, Ethiopia, Ghana, Greenland, and Vietnam (hereafter cases). Our literature review showed that participatory programs were less likely to use digital devices, and 2 of our 3 more participatory cases were also slow to adopt digital data entry. Programs that were participatory and used digital devices were more likely to report management actions, which was consistent with cases in Ethiopia, Greenland, and Australia. Programs engaging volunteers were more frequently reported as ongoing, but those involving digital data entry were less often sustained when data collectors were volunteers. For the Vietnamese and Canadian cases, sustainability was undermined by a mismatch in stakeholder objectives. In the Ghanaian case, complex field protocols diminished monitoring sustainability. Innovative technologies attract interest, but the foundation of effective participatory adaptive monitoring depends more on collaboratively defined questions, objectives, conceptual models, and monitoring approaches. When this foundation is built through effective partnerships, digital data entry can enable the collection of more data of higher quality. Without this foundation, or when implemented ineffectively or unnecessarily, digital data entry can be an additional expense that distracts from core monitoring objectives and undermines project sustainability. The appropriate role of digital data entry in PM likely depends more on the context in which it is used and less on the technology itself.     

重金属阳离子荧光传感器合成及光谱性研究

通过亚胺缩合的反应制备出阳离子荧光传感器（Cation Fluorescent Sensors,CFSs）,并对其结构、光谱性能检测、荧光量子产率等进行了详细的研究.通过荧光化学传感器产生的荧光光谱一直是高效的分析方法,因此合成了新的基于席夫碱的荧光化学传感器,并研究了对各种金属离子的结合特性.在CH3CN溶液中测试了阳离子荧光传感器时不同阳离子的选择性响应,发现对Cu2＋有较好的选择性,可用于Cu2＋的检测.该类阳离子荧光传感器是基于2,2-联噻吩-5-乙醛的荧光发射基团和邻氨基苯甲醚为识别基团的一类阳离子荧光传感器.     

基于RFPA2D复合局部挠曲岩体数值模拟

为研究复合局部挠曲岩体强度特征以及破坏规律,采用岩石真实破裂软件RFPA^2D,对水平层面挠曲30°,45°,60°,75°的复合岩体进行单轴压缩试验模拟。模拟结果表明:挠曲角为30°,45°,60°,75°的复合岩体破坏面几乎与挠曲段夹层重合,其挠曲端部均产生了垂直于挠曲段夹层的裂纹;复合单斜岩体与复合挠曲岩体破坏面的形成因素大致相同,夹层强度是2种岩体失稳的主要因素;复合挠曲岩体单轴抗压强度随挠曲角增大同样呈“U”型变化,与单斜岩体变化趋势一致;当水平层状岩体发生挠曲后,其单轴抗压强度减小,当挠曲角为60°时,强度降低25.19%,当挠曲角为75°时,强度降低0.17%。;随着均质系数m的增大,复合挠曲岩体单轴抗压强度以及轴向应变均出现逐渐递增的趋势,且不同m值,其岩体裂隙扩展方式具有明显差别。     

CO2浓度增加对作物影响的研究动态

大气CO2浓度不断增加将以两种方式影响作物的代谢、生长发育和产量的形成：一是通过温室效应“加热”气候,改变降水类型,进而影响作物;二是浓度变化本身对作物生理过程的影响。介绍了国内外近年来在与CO2浓度有关的作物生理实验方面取得的进展及其主要结果。     

高铁扣件弹条疲劳断裂原因分析

通过对WJ-7型扣件中60Si2MnA弹条在拉伸-扭转试验过程发生断裂的原因进行分析和数值模拟研究,得出弹条断裂的原因.对60Si2MnA弹条承受的荷载进行分析可知,WJ-7型扣件在铁垫板与弹条后端接触区域内弯处应力集中最大,是造成弹条断裂破坏的主要原因之一,而弹条断裂的根本原因是弹条长期处于极限强度下工作,使弹条最终...     

中国旅游业CO_2排放区域差异的空间分析

在旅游业节能减排形势严峻的背景下,深入研究中国旅游业CO_2排放问题,制定科学的区域节能减排政策已刻不容缓。本文首先运用"自下而上"法,估算了1993-2012年中国整体旅游业、旅游业各分部门、大陆各省区(不含西藏)旅游业CO_2排放量。在此基础上,对全国及三大地带旅游业CO_2排放的总体特征进行分析;利用Theil指数法分析了中国旅游业CO_2排放强度的区域差异、区域内差异和区域间差异;运用AreView软件对中国旅游业CO_2排放强度的省际差异进行直观图示。分析结果显示:1993-2012年,中国旅游业CO_2排放量从1 480.868×10~4t升至6 274.129×10~4t;全国及三大地带旅游业CO_2排放强度整体上呈现出先显著下降、再缓慢梯度下降的趋势;中国旅游业CO_2排放强度空间分布不均匀,东部地区旅游业CO_2排放强度低于中部和西部地区;中国旅游业CO_2排放强度的区域总体差异、区域间差异和区域内差异整体呈逐渐缩小的趋势,区域间差异对总体差异的贡献率为94%-98%,区域间差异占主导地位;中国旅游业CO_2排放强度省际差异明显,属于旅游业CO_2排放强度弱显著区的省区基本位于东部沿海地区,河北、湖南、河南、广西、甘肃和新疆等省区频繁出现在旅游业CO_2排放强度强显著区之列,因此上述省区应是中国旅游业CO_2未来节能减排的区域重点。据此提出差别化的CO_2减排对策:东部地区应通过技术改进和调整产业结构、能源消费结构来降低CO_2排放强度,并以此带动中部和西部地区旅游业节能减排;中部和西部地区应加强与东部地区合作,将提高能源使用率、降低CO_2排放强度作为旅游业减排工作的重点。     

双水相气浮浮选光度法处理环境水样中痕量土霉素残留物

建立了一种新型分离方法--双水相气浮浮选光度法,使其处理环境水样中痕量土霉紊(OTC)残留物,研究了其工作原理,并用高效液相色谱法对该方法的可靠性进行了验证.利用自制的双水相气浮浮选装置,选择四氢呋喃作亲水有机溶剂、质量分数为10%的NaCl溶液作分相剂,NaOH溶液调节pH,将Cu2+与OTC形成的疏水配合物浮选至有机相,实现OTC与水样分离.浮选完毕后,经紫外-可见分光光度法分析,线性回归方程为A=1.532×105c+0.1230(其中:A为有机相的吸光度;c为水样的OTC摩尔浓度,mol/L),相关系数为0.9998,该方法的线性范围为4.8×10-7～7.3×10-5 mol/L,OTC加标回收率为99.5%～100.1%.     

负载型TiO2薄膜光催化剂降解亚甲基蓝

采用溶胶-凝胶法制备了玻璃负载的TiO2薄膜光催化剂,研究了该催化剂对亚甲基蓝溶液的光催化降解,考察了反应时间、水样的初始浓度、溶液的pH等对光催化降解效果的影响。     

针铁矿对Pb~(2+)的吸附特征及影响因素研究

通过恒温振荡平衡法研究了Pb~(2+)在针铁矿上的等温吸附和吸附动力学特征,探讨了吸附的影响因素.结果表明:(1)随Pb~(2+)平衡浓度和pH的增大,针铁矿对Pb~(2+)的吸附量逐渐增大.(2)针铁矿对Pb~(2+)的等温吸附可用Freundlich和Langmuir方程较好地拟合.(3)在相同温度和pH下,随离子强度的提高,针铁矿对Pb~(2+)的吸附量增大.(4)在相同离子强度和pH下,针铁矿对Pb~(2+)的吸附量总体随温度升高而增大.针铁矿对Pb~(2+)的吸附是自发进行的吸热反应.(5)针铁矿吸附Pb~(2+)的过程可分为初始的快吸附和随后的慢吸附2个阶段.pH影响吸附反应快慢,随pH增大吸附速率增大;随着pH的增大,达到平衡吸附的时间缩短.吸附动力学方程用Elovich方程拟合最佳.