Mechanical Properties with the Functional Group of Additives for Starch/PVA Blend Film

This paper deals with the mechanical properties and degree of swelling (DS) of starch/PVA blend film with the functional groups i.e., hydroxyl and carboxyl group, of additives. Starch/PVA blend films were prepared by using the mixing process. Glycerol (GL) with 3 hydroxyl group, sorbitol (SO) with 6 hydroxyl group, succinic acid (SA) with 2 carboxyl group, malic acid (MA) with 1 hydroxyl and 2 carboxyl group, tartaric acid (TA) with 2 hydroxyl and 2 carboxyl group and citric acid (CA) with 1 hydroxyl and 3 carboxyl group were used as additives. The results of measured tensile strength (TS) and elongation (%E) verified that both hydroxyl and carboxyl group as a functional groups increased the flexibility and strength of the film. Values of DS for GL-added and SA-added films were low. However, DS values of the films added MA, TA or CA with both hydroxyl and carboxyl group were comparatively high. When the film was dried at low temperature, the properties of the films were evidently improved. The reason is probably because the hydrogen bonding was activated at low temperature.     

The New Jersey Toxics Reduction Workplan for Ny-Nj Harbor: Distribution of Pcdd/Fs in Ambient Waters

As part of the NJ Toxics Reduction Workplan for NY-NJ Harbor, ambient water samples were collected at fifteen locations along the tidal portions of the Hackensack, Passaic, Raritan, Rahway and Elizabeth Rivers, and in Newark Bay, the Arthur Kill, and Kill van Kull. A Trace Organics Platform Sampler was used to collect a total of 75 suspended sediment phase samples between June 2000 and May 2002. These samples were analyzed for spatial and wet vs. dry weather trends in the 17 polychlorinated dibenzo-p-dioxins and dibenzofurans (PCDD/Fs; modified USEPA Method 1613b). Mean total PCDD/F (tPCDD/F) concentrations at the sampling locations ranged between 3.8 and 41.5 ng/g. On average, OCDD accounted for almost 80% of the tPCDD/F concentrations; mean total [PCDD/F – OCDD] concentrations ranged between 0.84 and 5.20 ng/g at the sampling locations. Mean 2,3,7,8-TCDD concentrations ranged between 0.003 and 0.28 ng/g, with the highest concentrations (> 0.10 ng/g) along the tidal Passaic and lower Hackensack Rivers, and in upper Newark Bay. Mean tPCDD/F Toxic Equivalency Quotients (TEQ) ranged between 45 and 344 TEQ pg/g, with the highest levels found in the lower Passaic River. Toxicity was primarily driven by 2,3,7,8-TCDD concentrations in the Passaic and Hackensack Rivers, and in Newark Bay. Examples of congener distribution patterns at some of the sampling locations are also presented.     

石油污染生物修复技术研究

本文概述了影响石油污染物生物降解修复处理的多种因素，对石油污染生物处理技术的发展进行了展望。其中主要影响因素包括：菌种的影响，菌种在不同的环境中和对不同碳链长度的碳氢化合物表现出不同的降解效率；石油物质本身物理化学特性的影响，如石油物质在水体或土壤中的浓度以及石油的粘度、沸点、折射率等特性；生存环境条件的影响，在接种入高效率的降解菌或利用土著微生物进行降解时，降解率受到生存环境中各种条件的影响，如表面活性剂、光照条件、吸附剂的利用、营养盐、共代谢底物、氧气、温度、盐度等。     

黑龙江省影响水稻安全生产的气象要素

在分析水稻安全生产条件的基础上，探讨了有关气象因素及灾害对水稻生长发育和产量的影响。重点分析了地区冷害的发生状况及干湿条件，在充分考虑黑龙江省地区气候特征、农业生产区域及品种熟性的基础上，确定了影响水稻安全生产的灾害和气象指标。利用多年气象资料，计算了黑龙江省各地的冷害发生机率及稻田干燥度指数等，通过指标对比分析，初步提出了黑龙江省水稻安全生产的区域划分，为水稻生产的防灾减灾提供了科学的气象依据。     

以人为因素为中心的航空安全多级模糊综合评价

在航空安全中,根据SHEL模型,以人为因素为中心,列出影响航空安全的一级和二级指标进行多级模糊综合评价,得出各指标对航空安全的影响权重,从而采取相应措施,即加强组织内的横向纵向沟通交流,加大机务方面的培训力度,严格按照标准操作程序,形成公正合理、积极向上的企业文化,以提高航空安全.     

复杂工业系统中班组人因失误分析

在复杂工业系统中 ,人因可靠性分析 (HRA)是预防和减少人因失误的有效方法。人在复杂工业系统中的生产活动 ,往往是由组织中班组成员集体完成的 ,完整的HRA必须充分考虑班组人误的产生。班组人误的产生有其自身的规律 ,如何合理地定义人员行为形成因子 (PSFs)是班组人因失误分析的难点 ,也是班组人因失误分析的重要手段 ,被广泛应用在核电厂 ,航空和造船工业领域的事故分析中。笔者详细分析和探讨了班组人因失误的定义、产生过程及相关的人的行为形成因子 ,以期能使大规模工业系统中的人因失误分析更加合理和完善。     

谈企业安全生产中的人因管理

企业在安全生产中，往往更注重于物因的管理。事实上，在安全事故的致因中，人为因素占据了主导地位。本文浅略地分析了影响人的不安全行为的主要因素，提出了加强人因管理的一些对策。．     

人机显示/控制界面适配性综合评价指标和评价方法

通过对驾驶舱人机显示 /控制界面适配性指标影响因素、视觉信息流工效的测定与评估方法的研究 ,建立了一套视觉信息流工效综合评估系统研究体系 ;研究的初步结果主要有 ,飞机驾驶员视域中存在最佳、较好、极限工效区 ,并且振动、反射眩光、噪声、显示字符的形状 /颜色特征 /对比度 /显示方式等是影响信息获取工效的主要因素 ;飞机驾驶舱显示布局及显示方式应符合视觉工效学设计原则。     

基于C/S与B/S混合模式的大气污染监测系统设计

以C／S与B／S混合模式为基础的大气监测系统、既能充分发挥网络资源的便捷化，实现企业监测数据与管理系统的快速链接，又充分利用C／S模式的安全性能，以保证系统的安全性。因而此系统是当前的一种较新型的，功能较为强大的网络监测系统。