环境空气自动监测系统钼转换效率的误差问题研究

环境空气自动监测系统是对城市环境空气各项技术指标进行自动监测的系统。系统提供的环境质量现状及变化趋势的数据判断环境质量,是制定解决现存或潜在的环境问题环境措施的依据。本文首阐述了化学发光法NO-NO2-NOX自动监测仪特点,然后比较了手动操作与中心控制室软件远程操控数据的差别,并根据数据结果分析误差产生的原因,并提出相关解决措施。     

基于启发式元胞自动机模型的群落演替初期营养级联结效率研究

保护和维持生态系统平衡,非确定性模型的发展使得人们掌握了除确定性模型求解以外的另一条建模途径。在解决生态系统这种复杂系统的问题时,要求我们寻找一种可以满足时空特异性与非线性的途径。群落演替的驱动机制与作用规律是生态研究的一个重要问题,本文通过建立群落演替初期第一第二营养级间相互作用关系的元胞自动机模型研究了营养级联结效率的问题,提出了一种除holling模型以外的捕食者——被捕食者模拟方法,并对各自具有不同特征的生态系统的模拟问题提出了建议。     

气象条件对上甸子地区气溶胶散射特征的影响

利用北京地区上甸子站气溶胶散射系数、PM2.5质量浓度和气象要素1 a的观测资料,研究不同天气条件下上甸子地区散射系数的变化特征,并讨论了气象条件对散射系数的影响.结果表明,散射系数在雾霾天最高608.4 Mm-1,其次为雾天500.6 Mm-1和霾天423.7 Mm-1,是一般天气散射系数的6.4～9.2倍.在各类天...     

气象因素对大气中PM2.5的去除效应分析

通过对北京地区几次典型降水、降雪、大风等天气事件过程中大气PM2.5质量浓度变化情况分析,研究了降水、降雪、大风等气象因素对大气中PM2.5的去除效应,研究结果表明,上述气象因素对大气中PM2.5均有明显去除效果,因去除机理不同,各气象因素对PM2.5的去除能力依次为风、降雪、降雨.     

我国城市资源环境消耗降低环境效率提高

9月16日,北京工商大学世界经济研究中心在北京发布了《中国300个省市绿色经济与绿色GDP指数》。报告指出,中国经济复苏快速增长的同时,全国273个城市资源环境消耗总体水平有所降低,资源环境效率显著提高,平均达到1．60元／立方米,比上年1．05元／立方米平均提高52．3％。     

新型烟气净化装置(LAPD)除尘效率的试验研究

通过单因素试验研究了新型烟气净化装置(LAPD)运行参数变化对除尘效率的影响,结果表明:LAPD的除尘效率随着溢流口液面高度的增大而提高;随着环形管高度的增大而先提高后下降。通过正交试验,建立了LAPD的最佳工况参数标准。     

企业风险管理与经营效率：来自中国保险业的经验证据

本文从风险管理的视角对企业效率评估的数据包络分析技术进行了改进,探讨了风险管理与经营效率的内在关联,并以中国保险业为例,对1999年以来企业真实的经营效率水平进行了评估。结果表明：企业内部的风险管理能力对其经营效率水平的提升具有明显的影响,而且这种影响力正在逐渐加强。不考虑企业内部的风险管理水平将直接导致其经营效率的测算结果出现低估,2002年以后这种低估的程度越发明显,这可归因于同期保险企业开始逐渐重视提高自身的风险管理能力。以上结论也为企业如何在管控风险的同时提升经营效率水平提供了有价值的指导。     

1株脱氮除磷菌的筛选及其特性研究

采用YG培养基,结合蓝白斑筛选、异染粒染色及好氧除磷能力检测等实验,从城市生活污水处理厂好氧生化池的活性污泥中分离出7株好氧除磷菌;再经硝酸盐还原产气和缺氧培养实验,筛选出1株高效脱氮除磷菌;通过16S rRNA基因同源性比较和生理生化鉴定,初步将其鉴定为Pseudomonas grimontii,命名为C18.菌株C18在好氧培养24h后,培养基中上清液磷浓度从38.7mg/L降低到2.28mg/L,除磷率达94.1%.C18在缺氧培养24h后,培养基中上清液磷浓度从44.5mg/L降低到5.21mg/L,除磷率达88.3%;上清液硝酸盐氮浓度从184.2mg/L降低到30.6mg/L,脱氮率达83.4%.菌株C18最适脱氮除磷温度为30℃;最适脱氮除磷pH为7.5.     

Effect of platinum on the photocatalytic degradation of chlorinated organic compound

TiO2 nanoparticles, doped with di erent Pt contents, were prepared by a modified photodeposition method using Degussa P-25 TiO2, H2PtCl6 6H2O and methanol as the solvents. The physicochemical properties of Pt/TiO2 were investigated by the nitrogen adsorption and desorption isotherm measurement technique, X-ray di raction analysis and photoluminescence spectra, respectively. Reaction rates from photocatalytic removal of dichloromethane over Degussa P-25 TiO2 and Pt/TiO2 were evaluated. The average diameter and BET surface area of the TiO2 catalyst particles were 300 nm and 50 m2/g, respectively. The degradation e ciency was 99.0%, 82.7%, 55.2%, and 57.9% with TiO2 at inlet concentrations of 50, 100, 200, and 300 ppm, respectively. And the degradation e ciency was 99.3%, 79.7%, 76.5%, and 73.4% with a 0.005 wt.% Pt/TiO2 at inlet concentrations of 50, 100, 200, and 300 ppm, respectively. In addition, we found that the photoluminescence emission peak intensities decreased with increases in the doping amount of Pt, which indicates that the irradiative recombination was weakened. Furthermore, the results showed that the UV/0.005 wt.% Pt/TiO2 process was capable of e ciently decomposing gaseous DCM in air.     

TiO2 nanotubes as solid-phase extraction adsorbent for the determination of polycyclic aromatic hydrocarbons in environmental water samples

An analytical method based on TiO2 nanotubes solid-phase extraction (SPE) combined with gas chromatography (GC) was established for the analysis of seven polycyclic aromatic hydrocarbons (PAHs): acenaphtylene, acenaphthene, anthracene, fluorene, phenanthrene, fluoranthene and pyrene. Factors a ecting the extraction e ciency including the eluent type and its volume, adsorbent amount, sample volume, sample pH and sample flow rate were optimized. The characteristic data of analytical performance were determined to investigate the sensitivity and precision of the method. Under the optimized extraction conditions, the method showed good linearity in the range of 0.01–0.8 g/mL, repeatability of the extraction (RSD were between 6.7% and 13.5%, n = 5) and satisfactory detection limits (0.017–0.059 ng/mL). The developed method was successfully applied to the analysis of surface water (tap, river and dam) samples. The recoveries of PAHs spiked in environmental water samples ranged from 90% to 100%. All the results indicated the potential application of titanate nanotubes as solid-phase extraction adsorbents to pre-treat water samples.