Debromination of decabromodiphenyl ether by organo-montmorillonite-supported nanoscale zero-valent iron：Preparation, characterization and influence factors

An organo-montmorillonite-supported nanoscale zero-valent iron material(M-NZVI) was synthesized to degrade decabromodiphenyl ether(BDE-209). The results showed that nanoscale zero-valent iron had good dispersion on organo-montmorillonite and was present as a core-shell structure with a particle size range of nanoscale iron between 30–90 nm, characterized by XRD, SEM, TEM, XRF, ICP-AES, and XPS. The results of the degradation of BDE-209 by M-NZVI showed that the efficiency of M-NZVI in removing BDE-209 was much higher than that of NZVI. The efficiency of M-NZVI in removing BDE-209 decreased as the pH and the initial dissolved oxygen content of the reaction solution increased, but increased as the proportion of water in the reaction solution increased.     

Beyond hypoxia：Occurrence and characteristics of black blooms due to the decomposition of the submerged plant Potamogeton crispus in a shallow lake

Organic matter-induced black blooms(hypoxia and an offensive odor) are a serious ecosystem disasters that have occurred in some large eutrophic shallow lakes in China. In this study, we investigated two separate black blooms that were induced by Potamogeton crispus in Lake Taihu, China. The main physical and chemical characteristics, including color- and odor-related substances, of the black blooms were analyzed. The black blooms were characterized by low dissolved oxygen concentration(close to 0 mg/L), low oxidation-reduction potential, and relatively low pH of overlying water. Notably higher Fe2+and∑S2-were found in the black-bloom waters than in waters not affected by black blooms. The black color of the water may be attributable to the high concentration of these elements, as black FeS was considered to be the main substance causing the black color of blooms in freshwater lakes. Volatile organic sulfur compounds, including dimethyl sulfide, dimethyl disulfide, and dimethyl trisulfide, were very abundant in the black-bloom waters. The massive anoxic degradation of dead Potamogeton crispus plants released dimethyl sulfide, dimethyl disulfide, and dimethyl trisulfide, which were the main odor-causing compounds in the black blooms. The black blooms also induced an increase in ammonium nitrogen and soluble reactive phosphorus levels in the overlying waters. This extreme phenomenon not only heavily influenced the original lake ecosystem but also greatly changed the cycling of Fe, S, and nutrients in the water column.     

Antimony smelting process generating solid wastes and dust：Characterization and leaching behaviors

A large amount of solid waste has been produced by the antimony smelting process in the＂World Capital of Antimony＂, Xikuangshan area in China. This study comprehensively investigated the physical and chemical characteristics of the various solid wastes, as well as the leaching behavior of the solid wastes, which included water-quenched slag,arsenic-alkali residue, desulfurized slag and blast furnace dust. These four types of waste were enriched in a variety of heavy metals and metalloids and more specifically with As and Sb levels up to 8.6 × 104 and 3.16 × 105mg/kg, respectively, in arsenic-alkali residue. For desulfurized slag and water-quenched slag, the leaching concentration of Sb significantly exceeded the acceptable limits during the leaching tests using the toxicity characteristic leaching procedure and the synthetic precipitation leaching procedure. In addition, As leaching in arsenic-alkali residue was extraordinarily hazardous, being three orders of magnitude higher than the regulatory level of As. According to the results of the extraction tests, all the tested wastes were classified as hazardous waste.     

Compositions and sources of organic acids in fine particles (PM2.5) over the Pearl River Delta region, south China

Organic acids as important constituents of organic aerosols not only influence the aerosols' hygroscopic property, but also enhance the formation of new particles and secondary organic aerosols. This study reported organic acids including C14–C32fatty acids, C4–C9dicarboxylic acids and aromatic acids in PM2.5collected during winter 2009 at six typical urban, suburban and rural sites in the Pearl River Delta region. Averaged concentrations of C14–C32fatty acids, aromatic acids and C4– C9 dicarboxylic acids were 157, 72.5 and 50.7 ng/m3, respectively. They totally accounted for 1.7% of measured organic carbon. C20–C32fatty acids mainly deriving from higher plant wax showed the highest concentration at the upwind rural site with more vegetation around, while C14–C18fatty acids were more abundant at urban and suburban sites, and dicarboxylic acids and aromatic acids except 1,4-phthalic acid peaked at the downwind rural site. Succinic and azelaic acid were the most abundant among C4–C9dicarboxylic acids, and 1,2-phthalic and 1,4-phthalic acid were dominant aromatic acids. Dicarboxylic acids and aromatic acids exhibited significant mutual correlations except for 1,4-phthalic acid, which was probably primarily emitted from combustion of solid wastes containing polyethylene terephthalate plastics. Spatial patterns and correlations with typical source tracers suggested that C14–C32fatty acids were mainly primary while dicarboxylic and aromatic acids were largely secondary. Principal component analysis resolved six sources including biomass burning, natural higher plant wax, two mixed anthropogenic and two secondary sources; further multiple linear regression revealed their contributions to individual organic acids. It turned out that more than 70% of C14–C18fatty acids were attributed to anthropogenic sources, about 50%–85% of the C20–C32fatty acids were attributed to natural sources, 80%–95% of dicarboxylic acids and 1,2-phthalic acid were secondary in contrast with that 81% of 1,4-phthalic acid was primary.     

Two-step accelerated mineral carbonation and decomposition analysis for the reduction of CO2 emission in the eco-industrial parks

Carbon dioxide（CO2） emissions are a leading contributor to the negative effects of global warming. Globally, research has focused on effective means of reducing and mitigating CO2 emissions. In this study, we examined the efficacy of eco-industrial parks（EIPs） and accelerated mineral carbonation techniques in reducing CO2 emissions in South Korea.First, we used Logarithmic Mean Divisia Index（LMDI） analysis to determine the trends in carbon production and mitigation at the existing EIPs. We found that, although CO2 was generated as byproducts and wastes of production at these EIPs, improved energy intensity effects occurred at all EIPs, and we strongly believe that EIPs are a strong alternative to traditional industrial complexes for reducing net carbon emissions. We also examined the optimal conditions for using accelerated mineral carbonation to dispose of hazardous fly ash produced through the incineration of municipal solid wastes at these EIPs. We determined that this technique most efficiently sequestered CO2 when micro-bubbling, low flow rate inlet gas, and ammonia additives were employed.     

垃圾“零填埋”,路在何方?

<正>垃圾主要指在日常生活中为日常生活提供服务的活动中产生的固体废物。与其他固体废物不同的是,垃圾是我们每个人每一天都要产生和排放的,不可避免地要与我们经常性地发生"亲密接触",处理不当会影响市容、传播疾病和污染环境。正因为     

餐厨/厨余垃圾“不入土”,变废为宝“再消化”——北京绿色空间生物科技有限公司的循环之道

餐厨及厨余垃圾是有机垃圾的一种,餐厨垃圾是指餐饮服务单位在食品加工、饮食服务、单位供餐活动中产生的食物残渣、残液和废弃油脂等废弃物。厨余垃圾是指,家庭中产生的易腐食物垃圾,主要包括剩菜、剩饭、菜帮菜叶、瓜果皮核废弃食物等。餐厨及厨余垃圾含有大量的有机质,如果将它们能就地处理变成有机肥,既可省下用作填埋场的土地,还能节约运输它们的车辆和能源,防止滋生蚊蝇和细菌。不仅保护了环境,还滋养了土地。     

《环境工程技术学报》征稿启事

正《环境工程技术学报》是中华人民共和国环境保护部主管、中国环境科学研究院主办,面向国内外公开发行的环境工程技术领域综合性科技期刊。本刊的主要栏目有:水污染控制技术与资源化利用,大气污染控制技术与清洁能源的利用,土壤污染防治与农村环境综合整治技术,固体废物污染防治与资源化技术,生物、生态工程与恢复技术,基于循环经济的污染综合防治技术,辐射与振动污染防治技术,其他环境系统工程与管理技术(包括环境信息集成技术、监     

厌氧共代谢分解难降解有机物的研究进展

文章介绍了厌氧共代谢的提出、作用机制、调控研究及应用现状,从共代谢技术的基质类型、菌群结构和代谢途径三方面综述了国内外有关厌氧共代谢作用机制的研究现状、发展趋势,并着重分析了厌氧共代谢的调控技术和应用情况,展望了厌氧共代谢技术的未来研究方向,为解决难降解有机污染物的治理瓶颈提供借鉴和参考。     

外加碳源影响水体异养反硝化脱氮的研究进展

近年来,水体硝酸盐污染受到世界范围内的广泛关注,从去除硝酸盐污染和降低脱氮成本两个方面考虑,生物反硝化法是比较经济、实用的方法。目前,反硝化过程主要是通过异养反硝化作用实现,碳源作为反硝化过程的电子供体,是影响反硝化过程的主要因素,当污水中碳氮比偏低时,需要考虑添加额外碳源提高异养反硝化作用速率,保证反硝化过程的正常进行。针对现有问题综述常用的几种主要外加碳源以及它们对反硝化作用的影响,为今后寻找到更加经济、有效的外加碳源提供参考。