Remarkable promotion effect of trace sulfation on OMS-2 nanorod catalysts for the catalytic combustion of ethanol

OMS-2 nanorod catalysts were synthesized by a hydrothermal redox reaction method using MnSO₄ (OMS-2-SO₄) and Mn(CH₃COO)₂ (OMS-2-AC) as precursors. SO₄^2 −-doped OMS-2-AC catalysts with different SO₄^2 − concentrations were prepared next by adding (NH₄)₂SO₄ solution into OMS-2-AC samples to investigate the effect of the anion SO₄^2 − on the OMS-2-AC catalyst. All catalysts were then tested for the catalytic oxidation of ethanol. The OMS-2-SO₄ catalyst synthesized demonstrated much better activity than OMS-2-AC. The SO₄^2 − doping greatly influenced the activity of the OMS-2-AC catalyst, with a dramatic promotion of activity for suitable concentration of SO₄^2 − (SO₄/catalyst = 0.5% W/W). The samples were characterized by X-ray diffraction (XRD), field emission scanning electron microscopy (FE-SEM), transmission electron microscopy (TEM), X-ray photoelectron spectroscopy (XPS), inductively coupled plasma optical emission spectroscopy (ICP-OES), NH₃-TPD and H₂-TPR techniques. The results showed that the presence of a suitable amount of SO₄^2 − species in the OMS-2-AC catalyst could decrease the Mn–O bond strength and also enhance the lattice oxygen and acid site concentrations, which then effectively promoted the catalytic activity of OMS-2-AC toward ethanol oxidation. Thus it was confirmed that the better catalytic performance of OMS-2-SO₄ compared to OMS-2-AC is due to the presence of some residual SO₄^2 − species in OMS-2-SO₄ samples.     

Enhanced CO2 adsorptive performance of PEI/SBA-15 adsorbent using phosphate ester based surfactants as additives

In this study,a series of polyetherimide/SBA-15: 2-D hexagonal P6 mm,Santa Barbara USA(PEI/SBA-15) adsorbents modified by phosphoric ester based surfactants(including tri(2-ethylhexyl)phosphate(TEP),bis(2-ethylhexyl) phosphate(BEP) and trimethyl phosphonoacetate(TMPA))were prepared for CO_2 adsorption.Experimental results indicated that the addition of TEP and BEP had positive effects on CO_2 adsorption capacity over PEI/SBA-15.In particular,the CO_2 adsorption amount could be improved by around 20% for 45PEI–5TEP/SBA-15 compared to the additive-free adsorbent.This could be attributed to the decrease of CO_2 diffusion resistance in the PEI bulk network due to the interactions between TEP and loaded PEI molecules,which was further confirmed by adsorption kinetics results.In addition,it was also found that the cyclic performance of the TEP-modified adsorbent was better than the surfactant-free one.This could be due to two main reasons,based on the results of in situ DRIFT and TG-DSC tests.First and more importantly,adsorbed CO_2 species could be desorbed more rapidly over TEP-modified adsorbent during the thermal desorption process.Furthermore,the enhanced thermal stability after TEP addition ensured lower degradation of amine groups during adsorption/desorption cycles.     

Potential application of high pressure carbon dioxide in treated wastewater and water disinfection: Recent overview and further trends

Recently emerging disadvantages in conventional disinfection have heightened the need for finding a new solution. Developments in the use of high pressure carbon dioxide for food preservation and sterilization have led to a renewed interest in its applicability in wastewater treatment and water disinfection. Pressurized CO₂ is one of the most investigated methods of antibacterial treatment and has been used extensively for decades to inhibit pathogens in dried food and liquid products. This study reviews the literature concerning the utility of CO₂ as a disinfecting agent, and the pathogen inactivation mechanism of CO₂ treatment is evaluated based on all available research. In this paper, it will be argued that the successful application and high effectiveness of CO₂ treatment in liquid foods open a potential opportunity for its use in wastewater treatment and water disinfection. The findings from models with different operating conditions (pressure, temperature, microorganism, water content, media …) suggest that most microorganisms are successfully inhibited under CO₂ treatment. It will also be shown that the bacterial deaths under CO₂ treatment can be explained by many different mechanisms. Moreover, the findings in this study can help to address the recently emerging problems in water disinfection, such as disinfection by-products (resulting from chlorination or ozone treatment).     

Heterogeneous oxidation of SO2 by O3-aged black carbon and its dithiothreitol oxidative potential

Ozone (O₃) is an important atmospheric oxidant. Black carbon (BC) particles released into the atmosphere undergo an aging process via O₃ oxidation. O₃-aged BC particles may change their uptake ability toward trace reducing gases such as SO₂ in the atmosphere, leading to different environmental and health effects. In this paper, the heterogeneous reaction process between O₃-aged BC and SO₂ was explored via in-situ diffuse reflectance infrared Fourier transform spectroscopy (DRIFTS). Combined with ion chromatography (IC), DRIFTS was used to qualitatively and quantitatively analyze the sulfate product. The results showed that O₃-aged BC had stronger SO₂ oxidation ability than fresh BC, and the reactive species/sites generated on the surface had an important role in the oxidation of SO₂. Relative humidity or 254 nm UV (ultraviolet) light illumination enhanced the oxidation uptake of SO₂ on O₃-aged BC. The oxidation potentials of the BC particles were detected via dithiothreitol (DTT) assay. The DTT activity over BC was decreased in the process of SO₂ reduction, with the consumption of oxidative active sites.     

Surface modification of polypropylene non-woven fibers with TiO2 nanoparticles via layer-by-layer self assembly method: Preparation and photocatalytic activity

Polypropylene (PP) meltblown fibers were coated with titanium dioxide (TiO₂) nanoparticles using layer-by-layer (LbL) deposition technique. The fibers were first modified with 3 layers of poly(4-styrenesulfonic acid) (PSS) and poly(diallyl-dimethylammonium chloride) (PDADMAC) to improve the anchoring of the TiO₂ nanoparticle clusters. PDADMAC, which is positively charged, was then used as counter polyelectrolyte in tandem with anionic TiO₂ nanoparticles to construct TiO₂/PDADMAC bilayer in the LbL fashion. The number of deposited TiO₂/PDADMAC layers was varied from 1 to 7 bilayer, and could be used to adjust TiO₂ loading. The LbL technique showed higher TiO₂ loading efficiency than the impregnation approach. The modified fibers were tested for their photocatalytic activity against a model dye, Methylene Blue (MB). Results showed that the TiO₂ modified fibers exhibited excellent photocatalytic activity efficiency similar to that of TiO₂ powder dispersed in solution. The deposition of TiO₂ 3 bilayer on the PP substrate was sufficient to produce nanocomposite fibers that could bleach the MB solution in less than 4 hr. TiO₂-LbL constructions also preserved TiO₂ adhesion on substrate surface after 1 cycle of photocatalytic test. Successive photocatalytic test showed decline in MB reduction rate with loss of TiO₂ particles from the substrate outer surface. However, even in the third cycle, the TiO₂ modified fibers are still moderately effective as it could remove more than 95% of MB after 8 hr of treatment.     

植被收割对滨海湿地沉积物中CO_2和N_2O释放的影响

为了揭示冬季滨海湿地植被收割对其沉积物中温室气体释放的影响,以长江入海口典型滨海湿地——崇明东滩为研究对象,观测季节性(冬季)植被收割(分别于收割后第0天、第10天、第30天、第60天采样)与不收割条件下芦苇(Phragmites australis)、米草(Spartina alterniflora)、芦苇-米草交互带和光滩沉积物中CO2与N2O的释放特征.结果表明:1米草和芦苇-米草交互带植被收割并未增加沉积物中CO2的释放(P0.05),但芦苇收割可能会增加N2O的释放(P0.05),说明植被收割对湿地沉积物中CO2和N2O释放的影响与植被类型密切相关.2与芦苇带相比,米草和芦苇-米草交互带沉积物中CO2累积释放量分别高出12%~57%和17%~43%,但芦苇植被覆盖下沉积物中N2O累积释放量分别比二者高出11%~81%和8%~95%.可见,米草和芦苇-米草交互带沉积物碳的呼吸损失明显高于芦苇带,但芦苇植被覆盖下沉积物中N2O逸失量相对较高.34种植被类型下,沉积物中N2O累积释放量为0.1~0.4 mg/kg,CO2累积释放量则高达1 024~2 645 mg/kg.因此,冬季滨海湿地植被收割不会显著增加N2O的温室效应,但选择性收割米草有望减少沉积物碳的呼吸损失.     

不同晶型纳米TiO_2在斑马鱼体内的富集与清除

为探讨纳米材料的慢性生物效应以及材料结构对生物富集的影响,开展了A-TiO2(锐钛型纳米TiO2)和R-TiO2(金红石型纳米TiO2)在斑马鱼(Danio rerio)体内的长期富集和清除试验.采用半静态暴露试验,试验周期为46 d(暴露阶段28 d,清除阶段18 d),每种晶型设置2个处理组(ρ分别为4.0和10.0 mg/L),测定各时间点斑马鱼体内不同晶型纳米TiO2含量(以w计);以暴露阶段的BAF(生物富集系数)以及清除阶段的排出速率常数、总量清除率为终点,比较斑马鱼对2种晶型纳米TiO2的富集、清除的异同.结果表明:在暴露阶段,A-TiO2在斑马鱼体内的富集量显著高于R-TiO2,10.0 mg/L处理组斑马鱼体内富集量均显著高于4.0 mg/L处理组;4.0和10.0 mg/L的A-TiO2处理组的BAF分别为76.7和105.4 L/kg,略高于R-TiO2(41.6和36.1 L/kg),二者在斑马鱼体内均不具有生物蓄积性.在清除阶段,斑马鱼体内的2种晶型的纳米TiO2均可被排出,清除阶段的清除率为88.0%~100%;斑马鱼体内2种晶型纳米TiO2富集量的下降均符合一阶指数衰减方程,排出速率常数在0.26~1.01 d-1之间.     

不同有机废水厌氧产酸过程的研究

主要研究了不同类废弃有机物厌氧产酸过程中产生的挥发性脂肪酸的产量和组成比例。研究发现,废糖蜜溶液、蛋白废液和淀粉废液在达到最高产酸量时,超过50%的VFAs是乙酸,其次是丙酸,还含有少量的丁酸和戊酸。废甘油溶液在达到最高产酸量时,产生的VFAs的主要成分是丙酸。4种有机废液中,相同初始COD浓度条件下,淀粉废液产生的VFAs产量最多,初始COD为5000mg/L时最高产量为2.321g/L,其次是废甘油溶液,最高产量是2.244g/L。     

固相微萃取-气质联用法测定水中痕量土臭素和二甲基异崁醇

采用固相微萃-气相色谱/质谱法(SPME-GC/MS)对GSM和2-MIB进行富集检测。实验对萃取富集和仪器条件进行了优化,得出最佳实验条件：NaCl投加量30%,萃取温度65℃,萃取时间40 min,解吸3 min,不分流进样,SIM模式采集数据。实验还对萃取头的使用次数和维护进行了探讨。利用已经建立的SPME-GC/MS法对佛山市28家水厂的出厂水和原水、佛山典型景观千灯湖和亚艺公园湖水进行普查。该法具有操作简单快速、能实现自动化连续检测、准确、灵敏度高等特点,适用于饮用水中嗅味物质定性和定量。     

HNO_3在气相及SiO_2表面的紫外光解反应

利用紫外及红外吸收光谱等分析手段对365 nm光照下HNO3在气相与SiO2表面的光解反应进行了研究.考察了HNO3浓度、光照时间、相对湿度等条件对反应的影响.结果表明:随着HNO3浓度及光照时间的增加,光解产生的NO2和NO浓度均呈指数增加;无水汽情况下,400 Pa的HNO3光解45 min后,产生NO2及NO浓度比气相光解产生的分别高约3及1.7倍.HNO3光解产生的HONO的浓度随相对湿度的增加而呈线性增加,在SiO2颗粒物表面光解产生的NO2浓度随着相对湿度的增加而减少,而NO浓度则随之增大.400 Pa的HNO3光照45 min后,SiO2表面光解产生的HONO浓度是气相光解的3倍、SiO2表面暗反应的约30倍.