Oxidized multiwalled carbon nanotubes modified with 2-(2-hydroxy-5-nitrophenyl)-4,5-diphenyl imidazole for solid phase extraction and preconcentration of some metal ions

In this work, a new procedure for the enrichment of the trace amount of Cu²⁺, Ni²⁺, Co²⁺, Pb²⁺, Fe²⁺, and Zn²⁺ ions based on the utilization of multiwalled carbon nanotubes (MWCNT) modified with 2-(2-hydroxy-5-nitrophenyl)-4,5-diphenyl imidazole as chelating agent prior to their determination by flame atomic absorption spectrometry has been described. The influence of effective parameters including pH, amount of ligand and MWCNT, composition of eluent, and coexisting ions on recoveries of understudy metal ions was examined. At the optimum pH of 5.0, all metal ions were quantitatively sorbed onto the proposed solid phase and completely desorbed with 8?mL of 5.0?mol?L^?1 HNO₃. The detection limit of Cu²⁺, Co²⁺, Ni²⁺, Pb²⁺, Fe²⁺, and Zn²⁺ ions was 1.7, 2.4, 2.3, 2.9, 2.8, and 1.4?µg?L^?1, while the preconcentration factor was 63 for Cu²⁺ and 94 for the other metal ions and relative standard deviations between 1.8 less than 3.0%. The proposed procedure was applied for the analysis of various samples.     

Synthesis and in vitro anti-inflammatory activity of novel benzo[d] imidazolyl dihydrospiro[indoline-3,1′-isoindole]-2,4′,7′-triones

Synthesis of novel benzo[d]imidazolyldihydrospiro[indoline-3,1′-isoindole]-2,4′,7′-triones has been described. The key intermediate 2-[(2-sulfanyl-1H-benzo[d]imidazol-5-yl)amino]acetic acid is obtained by reacting 5-amino-2-mercapto benzimidazole and chloroacetic acid. The three-component reaction of 2-[(2-sulfanyl-1H-benzo[d]imidazol-5-yl)amino]acetic acid with isatin and 1,4-benzoquinone in the presence of 10 mol% of L-proline at ambient temperature afforded 2′-(2-mercapto-1H-benzo [d] imidazol-5-yl)-3′,3a′-dihydrospiro[indoline-3,1′-isoindole]-2,4′,7′(2′H,7a′H)-triones. All the synthesized compounds were evaluated for in vitro anti-inflammatory activity.     

石煤提钒工艺中烟气污染物排放控制研究

介绍了传统钠法焙烧石煤提钒生产工艺的原理及烟气污染物产生和治理现状,提出了一种新型的焙烧工艺及烟气污染防治技术,阐述了工艺原理,并与传统工艺和方法进行了比较分析。基于中试试验报告及监测数据,研究分析了烟气污染物防治措施的技术可行性,针对烟气排放中存在的问题及原因进行了探讨,并提出了改进措施及建议,旨在为石煤提钒企业在烟气污染物治理控制方面提供参考。     

溶胶粉末复合浸渍法制备颗粒状SCR脱硝催化剂的特性

针对以V₂O₅-WO₃/TiO₂为成分的颗粒状SCR脱硝催化剂在制备过程中存在的有效组分加载均匀性等问题,尝试了利用偏钛酸溶胶作为载体的催化剂生产方法.利用粉末/溶胶复合浸渍方式设计出4种催化剂的制备方法并分别制得样品.通过在不同温度条件下样品对烟气中NO_x成分去除效能的性能测试,以及进行相关的微观表征分析,研究比较了不同制备方式对催化剂特性的影响规律,旨在探索出一种合理、高效的催化剂制备工艺.结果表明:利用偏钛酸溶胶作为载体,同步浸渍加载WO₃和V₂O₅ 2种组分,相比传统的粉末浸渍和两步浸渍方式,该方法能够使浸渍组分在载体表面获得较高的覆盖率,并有效避免了浸渍组分溶出和重结晶现象的发生,所制得的催化剂样品具有较高的脱硝效率.      

莠去津降解菌HB-5的最佳产酶培养基及发酵条件

从农药厂废水中分离到一株降解莠去滓的节杆菌(Arthrobacter sp.)HB-5,以从该菌中提取到的降解酶对莠去津的降解率为指标,进行最佳产酶培养基及发酵条件的优化研究,对其产酶量进行了评价.通过正交试验和均匀试验,对细菌HB-5的发酵培养基进行了优化研究.运用SAS软件进行结果分析,所获优化培养基配方为:蔗糖3.0g·L-1,莠去津0.38g·L-1,K2HPO40.5g·L-1,KH2PO41.2 g·L-1,MgSO4·7H2O 1.2g·L-1,NaCl 0.1g·L-1,微量元素溶液3.8mL·L-1.得到菌株培养的最佳优化条件为:菌株发酵液培养时间为48h.接种量为2%,发酵液初始pH值为9,250mL三角瓶中装液量为80mL经优化后,降解酶对莠去津的降解率(91.64%)比原培养基(40.67%)提高了125%.     

Effects of glucose on the decolorization of Reactive Black 5 by yeast isolates

The cometabolic roles of glucose were investigated in decolorization of an azo dye, Reactive Black 5, by yeast isolates, Debaryomyces polymorphus and Candida tropicalis. The results indicated that the dye degradation by the two yeasts was highly associated with the yeast growth process and glucose presence in the medium. Color removal of 200 mg dye/L was increased from 76.4% to 92.7% within 60 h to 100% within 18-24 h with the increase of glucose from 5 to 10 g/L, although the activity of manganese dependent peroxidase （MnP） decreased by 2-8 times in this case. Hydrogen peroxide of 233.3 μg/L was detected in 6 h in D. polymorphus culture. The cometabolic functions of glucose and hydrogen peroxide could be also confirmed by the further color removals of 95.8% or 78,9% in the second cycle of decolorization tests in which 7 g glucose/L or 250 μg H202/L was superadded respectively together with 200 mg dye/L.     

提高水中BOD5测定质量的探讨

介绍了环境空气质量、分析用水、接种液加入量、曝气方法的选择等因素对BOD5测定的影响。提出测定过程中实验室空气质量、分析用水的选择、接种液的选择和加入量以及曝气方法应注意事项,以期得到较为准确的测定结果,提高废水中BOD5测定质量。     

油罐喷射火燃烧模拟

针对由一定压力的单相或两相介质泄漏或压力泄放系统排放引起的喷射火,利用gambit生成计算区域网格,得到相应的计算模型.再利用Fluent软件中的离散相模型计算气体流动,采用Realizable k-epsilon湍流模型和部分预混燃烧模型来预测燃料的燃烧,模拟了戊烷燃料燃烧和湍动多相流场,给出了燃烧速度矢量、温度和组...     

铜卟啉修饰In2TiO5纳米带的制备及其光催化性能

以5,10,15,20-四苯基铜卟啉（CuTPP）和5-（4-氨基苯基）-10,15,20-三苯基铜卟啉（CuAPTPP）为敏化剂,采用溶剂热法成功制备了铜卟啉敏化In₂TiO₅复合光催化剂.利用紫外、FT-IR、XRD、SEM、UV-vis DRS和N₂吸附脱附曲线对所得铜卟啉及复合光催化剂进行表征和分析.结果表明,铜卟啉负载于In₂TiO₅纳米带表面,复合光催化剂的禁带宽度及比表面积出现一定程度的减小,但未改变In₂TiO₅的晶型及形貌.其中,CuTPP敏化In₂TiO₅复合光催化剂的光催化活性最强,在模拟太阳光的照射下,120 min时罗丹明B（RhB）的降解率高达98.9%,而In₂TiO₅纳米带对RhB的降解率仅为33.5%,且循环使用5次后其光催化降解率仍保持在95%以上.