垃圾渗滤液除氨脱氮新工艺初探

通过对渗滤液经矿化垃圾回灌后水质特征的分析及现有除氨脱氮工艺用于渗滤液处理的可行性分析,提出了"多级低氧硝化反硝化+氨缺氧氧化"生物脱氮工艺流程,并阐述了其工艺的处理效果。得出结论:以渗滤液回灌处理出水作为研究对象,在不外加碳源条件下,该工艺可获得92%~99%的氨氮去除率,保证出水氨氮不高于25 mg/L,同时可获得73%~89%的总氮去除率。     

COD/TP比及NO_2~--N/TP对短程反硝化聚磷的影响

污水中COD/TP比和NO2--N/TP比对A/A/OSBR反硝化聚磷工艺运行有重要的影响。实验结果表明:随着COD/TP比值的增加,厌氧释磷增加、厌氧释磷速率提高。但当COD/TP比值为28.5时,过剩的碳源进入缺氧段,反硝化菌利用外碳源消耗,抑制了缺氧吸磷过程;当COD/TP比值为21时,合成的PHB不足,缺氧吸磷效率下降,而且长期在较低COD/TP比条件下运行,激发了聚糖菌与聚磷菌的竞争,聚磷菌处于竞争的劣势,反硝化聚磷能力最终消失;当COD/PO43--P为25时,短程反硝化聚磷效果最佳。NO2--N/TP比与COD/TP的比值相关联,在COD/TP=25的条件下,合适的NO2--N/TP比为3。当NO2--N/PO43--P为5时,SBR上一周期剩余的NO2-会影响厌氧释磷过程。当NO2--N/TP为1.8时,NO2-不足,会使反硝化聚磷过程不完全。     

UV/H2O2法处理焦化废水的试验研究

焦化废水是一种典型的成分复杂的难降解有机废水。实验利用UV／H2O2法对焦化废水的处理进行研究,探讨了不同反应时间、H2O2投加量、pH值等因素对COD去除率及色度降解效果的影响。结果表明．废水起始COD质量浓度为1334mg几时,H2O2投加浓度为45mmol/L,pH值=11,紫外灯照射60min,COD去除率可达70％以上;随着H2O2投加量的增加以及pH值的升高,污水的色度明显降低。     

差压法测定水样中的BOD_5

差压法(压力感测法)是测定BOD5的一种简单可靠的方法,OxiTop即是基于这一原理的BOD测量系统,经试验验证分析,该方法操作简单、结果准确,是目前测定BOD5较好的一种方法。     

HP-5毛细管柱气相色谱法分离水中滴滴涕色谱条件研究

本试验利用HP-5毛细管柱,气相色谱法对水中滴滴涕几种衍生体的分离条件进行了研究和优化,找到了最佳仪器条件,为水中滴滴涕的检测提供了一定的试验参考。     

差压法测定水样中的BOD5

差压法（压力感测法）是测定BOD5的一种简单可靠的方法,OxiTop即是基于这一原理的BOD测量系统,经试验验证分析,该方法操作简单、结果准确,是目前测定BOD5较好的一种方法。     

深圳湾COD与TOC分布特征及相关性

分别于2008年2月(冬季),5月(春季),8月(夏季)和11月(秋季)对深圳湾海水中COD与TOC进行了四个航次的调查和研究,结合国家标准方法,获得了深圳湾COD与TOC的平面和季节分布特征,并对COD与TOC的相关性进行了探讨。结果表明:整个深圳湾海域COD基本遵循从湾内到湾外,逐渐降低的平面分布规律以及夏季春季冬季秋季的季节分布特征;海水TOC也基本遵循从湾内到湾外,逐渐降低的平面分布规律以及秋季冬季夏季春季的季节分布特征;深圳湾COD与TOC之间有着良好的相关性,相关系数大于0.9。     

Influence of temperature on the characteristics of aerobic granulation in sequencing batch airlift reactors

Aerobic granular sludge was cultivated in sequencing batch airlift reactors(SBAR) at 25,30,and 35°C,respectively.The effect of temperature on the granules characteristics was analyzed and the microbial community structures of the granules were probed using scanning electron microscope(SEM) and polymerase chain reaction-denaturing gradient gel electrophoresis(PCR-DGGE).The results showed that 30°C is optimum for matured granule cultivation,where the granules had a more compact structure,better settling abili...     

Combined alkaline and ultrasonic pretreatment of sludge before aerobic digestion

Alkaline and ultrasonic sludge disintegration can both be used as pretreatments of waste activated sludge (WAS) for improving the subsequent anaerobic or aerobic digestion. The pretreatment has been carried out using different combination of these two methods in this study. The effect was evaluated based on the quantity of soluble chemical oxygen demand (SCOD) in the pretreated sludge as well as the degradation of organic matter in the following aerobic digestion. For WAS samples with combined pretreatment, the released COD was in high level than those with ultrasonic or alkaline treatment. When combined with the same ultrasonic treatment, NaOH treatment resulted in more solubilization of WAS than Ca(OH)2. For combined NaOH and ultrasonic treatments with different sequences, the released COD were in the order: simultaneous treatment > ultrasonic treatment following NaOH treatment > NaOH treatment following ultrasonic treatment. For simultaneous treatment, low NaOH dosage (100 g/kg dry solid), short duration (30 min) of NaOH treatment, and low ultrasonic specific energy (7 500 kJ/kg dry solid) were beneficial for sludge disintegration. Using combined NaOH and ultrasonic pretreatment with the optimium parameters, the degradation efficiency of organic matter was increased from 38.0% to 50.7%, which is much higher than with ultrasonic (42.5%) or with NaOH pretreatment (43.5%) in the subsequent aerobic digestion at the same retention time.     

High-resolution modeling and evaluation of ozone air quality of Osaka using MM5-CMAQ system

High-resolution modeling approach is increasingly being considered as a necessary step for improving the monitoring and predictions of regional air quality. This is especially true for highly urbanized region with complex terrain and land-use. This study uses Community Multiscale Air Quality (CMAQ) model coupled with MM5 mesoscale model for a comprehensive analysis to assess the suitability of such high-resolution modeling system in predicting ozone air quality in the complex terrains of Osaka, Japan. The 1-km and 3-km grid domains were nested inside a 9-km domain and the domain with 1-km grid covered the Osaka region. High-resolution Grid Point Value-Mesoscale Model (GPV-MSM) data were used after suitable validation. The simulated ozone concentrations were validated and evaluated using statistical metrics using performance criteria set for ozone. Daily maxima of ozone were found better simulated by the 1-km grid domain than the coarser 9-km and 3-km domains, with the maximum improvement in the mean absolute gross error about 3 ppbv. In addition, 1-km grid results fared better than other grids at most of the observation stations that showed noticeable di erences in gross error as well as correlation. These results amply justify the use of the integrated high-resolution MM5-CMAQ modeling system in the highly urbanized region, such as the Osaka region, which has complex terrain and land-use.