Ce-PbO_2/C电极的制备及其去除水中酸性红B

采用电沉积法制备铈修饰的PbO2/C电极,通过SEM、XRD、XPS及循环伏安对PbO2/C、Ce-PbO2/C电极进行表征,结果表明,Ce-PbO2/C电极比PbO2/C颗粒细小,表面均匀致密,电化学氧化能力较强,修饰电极中Ce以CeO2的形态存在。以Ce-PbO2/C为工作电极,电解浓度为1 000 mg/L的高盐酸性红B模拟活性染料废水,考察了电压、pH、电解质浓度、极间距对脱色率、氨氮去除率及COD去除率的影响。确定适宜工艺条件为：初始酸性红B溶液浓度为1 000 mg/L,pH值为6,电压10 V,电解时间1 h,电极间距1.5 cm,该条件下脱色率、氨氮去除率和COD去除率分别为99.98%、97.23%和90.17%。通过UV-Vis及GC-MS初步分析了降解过程可能存在的中间产物及降解途径。     

Phosphine in paddy fields and the effects of environmental factors

Ambient levels of phosphine (PH₃) in the air, phosphine emission fluxes from paddy fields and rice plants, and the distribution of matrix-bound phosphine (MBP) in paddy soils were investigated throughout the growing stages of rice. The relationships between MBP and environmental factors were analyzed to identify the principal factors determining the distribution of MBP. The phosphine ambient levels ranged from 2.368 ± 0.6060 ng m⁻³ to 24.83 ± 6.529 ng m⁻³ and averaged 14.25 ± 4.547 ng m⁻³. The highest phosphine emission flux was 22.54 ± 3.897 ng (m² h)⁻¹, the lowest flux was 7.64 ± 4.83 ng (m² h)⁻¹, and the average flux was 14.17 ± 4.977 ng (m² h)⁻¹. Rice plants transport a significant portion of the phosphine emitted from the paddy fields. The highest contribution rate of rice plants to the phosphine emission fluxes reached 73.73% and the average contribution was 43.00%. The average MBP content of 111.6 ng kg⁻¹fluctuated significantly in different stages of rice growth and initially increased then decreased with increasing depth. The peak MBP content in each growth stage occurred approximately 10 cm under the surface of paddy soils. Pearson correlation analyses and stepwise multiple regression analysis showed that soil temperature (Ts), acid phosphatase (ACP) and total phosphorus (TP) were the principal environmental factors, with correlative rankings of Ts > ACP > TP.     

钢渣掺量对泡沫混凝土砌块性能的影响

泡沫混凝土是一种环保、节能的保温隔热材料,以其优良的保温性能,受到越来越多研究者的关注。对钢渣的特性进行了分析测试,对钢渣不同掺量对泡沫混凝土砌块特性的影响进行了研究,结果表明,采用添加5％～35％钢渣所制备的钢渣泡沫混凝土砌块,其密度等级为JC／T1062—2007中的B10级,掺人5％、15％钢渣的泡沫混凝土抗压强度达到A3．5等级,掺人25％、35％钢渣的泡沫混凝土抗压强度达到A2．5等级。随着钢渣掺量的增大,抗压强度、抗折强度降低,吸水率增大。在同一钢渣掺量的情况下,泡沫混凝土砌块的抗压强度变化率增加显著,而且随着钢渣的加入量升高而增大。钢渣的加入有利于提高泡沫混凝土砌块的后期抗压强度。     

隔爆型电机在火炸药危险场所应用的安全性分析

针对普通隔爆型电机应用于火炸药粉尘危险场所的安全性问题进行定量分析,设计壳体粉尘侵入量试验,系统研究不同间隙下的粉尘侵入量,根据试验数据,应用曲线外推法及阿贝尔(Abel)余容状态方程计算爆压,结合材料力学及薄壁理论进行隔爆型电气设备外壳强度及刚度的校核。计算表明:若壳体内粉尘较均匀的悬浮在空中,切向应力与许用应力处于同一数量级;如果火炸药粉尘在轴承室、接线盒等局部堆积成火炸药层,切向应力比许用应力大两个数量级。试验结果强调:用于火炸药粉尘危险场所的电气设备必须有特殊的防爆结构设计,普通的隔爆电机用于火炸药粉尘危险环境时存在一定的安全隐患。     

厦门市气候特征变化与酸雨形成研究

对地面风场的研究表明,厦门存在局地和海陆风环流,自1955年以来年平均风速、混合层厚度均呈现下降趋势,大气污染物的水平和垂直扩散能力也呈下降趋势。降水酸度随海拔高度的变化情况表明,海陆风环流有利于酸性污染物的积累,且锋面降水过程中的光化学污染加重了降水的酸化程度。     

酸沉降影响稻米品质的新发现

酸沉降影响了稻米质量和口感.酸雨时空分布从宏观上概括了稻米品质的地理分布.酸雨决定了酶活性相关金属离子的丰缺,继而影响淀粉合成关键酶的活性,最终影响淀粉合成质量.温度变化是表象,降雨pH值变化是条件,酶活性相关金属离子丰缺是根本,实质是酶活性相关金属离子或激活或抑制了支链淀粉合成关键酶的活性.提出了改善粮食作物质量的化控创新技术路线.     

过氯乙烯滤膜采样-酸消解-钼蓝光度法测定磷酸雾

建立了过氯乙烯滤膜采样 -酸消解 -钼蓝分光光度法测定磷化车间磷酸雾的监测方法。实验室模拟采样的捕集效率为 95 7%～ 99 1 %。单个实验室对含 5μg和 1 5μg样品进行多次测定 ,其相对标准差小于 5% ,样品加标回收率为 98 2 %～ 1 0 0 5% ,方法检测限为 0 0 0 7mg/m3。对标样测定 ,结果均在给定值范围内。用该法与等离子发射光谱法(ICP)对 5个样品进行比对测定 ,结果均令人满意。     

中波台电磁辐射叠加影响估算及与实测对比分析

以某中波电台为例,对多个不同频率的中波发射台同时运行时复合场强进行理论估算,对电磁辐射叠加影响进行分析,并将理论估算值与该台电磁辐射环境现状监测数据进行比对,得出距离发射塔近,复合场强理论估算值高于实测值,距离较远理论估算值与实测值较接近等结论。     

Experimental and theoretical studies on physico-chemical parameters affecting the solubility of phosphogypsum

Phosphogypsum is a waste by-product of the phosphate fertilizer industry, which is usually disposed in the environment because of its restricted use in industrial applications. Physico-chemical conditions existing in stack fluids and leachates are of major importance and determine solubility and redox stability of phosphogypsum, as well as radionuclide release from stacks to terrestrial environments. The aim of this study is to assess the effect of key parameters (e.g. ionic strength, temperature, pH) on the solubility of phosphogypsum. Phosphogypsum sampling and in-situ measurements were carried out at a coastal stack in Cyprus, solubility experiments were performed in simulated laboratory systems and thermodynamic calculations by means of MINTEQA2, an equilibrium speciation model. Generally, increasing ionic strength and temperature leads to increased phosphogypsum solubility, with the former being much more effective. The increased solubility of phosphogypsum in saline solutions is attributed solely to ionic strength effects on the activity of ionic species in solution and no solid phase transformations could be observed. The effect of pH on phosphogypsum solubility seems to be insignificant at least in a pH range between 4 and 8. Regarding uranium levels, there is a strong correlation between salinity and uranium concentration and linear correlation between phosphogypsum solubility and uranium levels in stack solutions, indicating the incorporation of uranium into the gypsum lattice and the formation of a solid solution.     

Comparison of criteria for prediction of runaway reactions in the sulphuric acid catalyzed esterification of acetic anhydride and methanol

Loss of temperature control is one of the major reasons that can lead to runaway reaction. This occurrence is commonly named thermal runway. The aim of this paper is the application of thermal runaway criteria in order to predict the onset of runaway phenomena and define the range of stability related to operating conditions in the reactor, with specific reference to the esterification of acetic anhydride and methanol catalysed by sulphuric acid tested in isoperibolic conditions. The isoperibolic calorimeter has also been used to obtain thermodynamic, kinetic and physical chemistry data necessary to develop a model for the reaction. Some runaway criteria applied in this work require a model for the process, so a model for the analyzed system been developed.Because of the modest reaction enthalpy and low activation energy this reacting system provide a severe test to the runaway criteria.In this work, various runaway criteria have been applied to the experimental and simulated data and the results obtained have been compared.