中日多氯联苯（PCBs）废弃物回收处置技术比较

自上世纪80年代伊始,我国含有多氯联苯的电力电容器等相继进入报废阶段,许多地区采用回收后山洞贮存、地下封存等方式处置,而其他处置方式在我国尚处于初级试验阶段。日本一些企业所采用的多氯联苯处置技术,值得我们学习和借鉴。     

锶盐废渣含硫状态分析及硫含量的测定

锶盐废渣中硫的状态及含量不同其作用大不相同,有的呈现活性导致膨胀破坏,而有的则表现为惰性,因此有必要了解硫的存在状态及含量。分析表明锶盐废渣中硫主要以硫酸盐硫(SO3)和硫化物硫(S2-)两种形式存在。选择硫酸钡重量法和碘量法进行化学测定,然后用X-射线能谱仪进行元素定性分析;并将化学分析和仪器测定两种方法进行对比。结果表明,X-射线能谱法可以快捷、方便地探测锶渣所含各种元素,但不能确定元素的价态;化学分析方法可得到相对准确的元素含量;用硫酸钡重量法和碘量法联合测定锶渣中的硫含量,与X-射线能谱法相比,偏差仅为0.37%。     

大件废物管理浅析

随着经济的发展和人民生活水平的改善,产品的更新换代速度也加快了,从而导致我国大件废物的产量逐年上升。本文简要概述了国内外大件废物管理的现状,通过比较发现我国大件废物管理方面存在的问题,并提出相应的对策和建议。     

Occurrence of phenols in leachates from municipal solid waste landfill sites in Japan

The concentrations of 41 phenols in leachates from 38 municipal solid waste (MSW) landfill sites in Japan were measured. The main phenols detected in leachates were phenol, three cresols, 4-tert-butylphenol, 4-tertoctylphenol, 4-nonylphenol, bisphenol A, and some chlorophenols. The concentration levels of phenols were affected by the pH values of the leachates and the different types of landfill waste. The origins of phenol and p-cresol were considered to be incineration residues, and the major origin of 4-tert-butylphenol, bisphenol A, and 2,4,6-trichlorophenol was considered to be solidified fly ash. In contrast, the major origins of 4-tert-octylphenol and 4-nonylphenol were considered to be incombustibles. The discharge of leachates to the environment around MSW landfill sites without water treatment facilities can cause environmental pollution by phenols. In particular, the disposal of incineration residues including solidified fly ash and the codisposal of solidified fly ash and incombustibles might raise the possibility of environmental pollution. Moreover, the discharge of leachates at pH values of 9.8 or more could pollute the water environment with phenol. However, phenol, 4-nonylphenol, and bisphenol A can be removed to below the con centration levels that impact the environment around landfill sites by a series of conventional water treatment processes.     

Leaching behavior of heavy metals from municipal solid waste incineration bottom ash and its geochemical modeling

With the increase in the number of municipal solid waste incineration (MSWI) plants constructed in China recently, great attention has been paid to the heavy metal leaching toxicity of MSWI residues. In this study, the effects of various parameters, including extractant, leaching time, liquid-to-solid ratio, leachate pH, and heavy metal content, on the release properties of Cd, Cr, Cu, Ni, Pb, and Zn from MSWI bottom ash were investigated. Partial least-squares analysis was employed to highlight the interrelationships between the factors and response variables. Both experimental research and geochemical modeling using Visual MINTEQ software were conducted to study the pH-dependent leaching behavior of these metals in fresh and weathered bottom ash, considering precipitation/dissolution and surface complexation reactions (adsorption by hydrous ferric oxide and amorphous aluminum oxide/hydroxide). The results showed that leachate pH was the predominant factor influencing heavy metal leachability. The leaching of Cu, Pb, and Zn was mainly controlled by precipitation/dissolution reactions, whereas surface complexation had some effect on the leaching of Cr, Cd, and Ni for certain pH ranges. The modeling results aggreed well with the experimental results. Part of this work was presented at the Fourth International Conference on Combustion, Incineration/Pyrolysis and Emission Control (i-CIPEC)     

Development of a risk-based index for source water protection planning, which supports the reduction of pathogens from agricultural activity entering water resources

Source water protection planning (SWPP) is an approach to prevent contamination of ground and surface water in watersheds where these resources may be abstracted for drinking or used for recreation. For SWPP the hazards within a watershed that could contribute to water contamination are identified together with the pathways that link them to the water resource. In rural areas, farms are significant potential sources of pathogens. A risk-based index can be used to support the assessment of the potential for contamination following guidelines on safety and operational efficacy of processes and practices developed as beneficial approaches to agricultural land management. Evaluation of the health risk for a target population requires knowledge of the strength of the hazard with respect to the pathogen load (massxconcentration). Manure handling and on-site wastewater treatment systems form the most important hazards, and both can comprise confined and unconfined source elements. There is also a need to understand the modification of pathogen numbers (attenuation) together with characteristics of the established pathways (surface or subsurface), which allow the movement of the contaminant species from a source to a receptor (water source). Many practices for manure management have not been fully evaluated for their impact on pathogen survival and transport in the environment. A key component is the identification of potential pathways of contaminant transport. This requires the development of a suitable digital elevation model of the watershed for surface movement and information on local groundwater aquifer systems for subsurface flows. Both require detailed soils and geological information. The pathways to surface and groundwater resources can then be identified. Details of land management, farm management practices (including animal and manure management) and agronomic practices have to be obtained, possibly from questionnaires completed by each producer within the watershed. To confirm that potential pathways are active requires some microbial source tracking. One possibility is to identify the molecular types of Escherichia coli present in each hazard on a farm. An essential part of any such index is the identification of mitigation strategies and practices that can reduce the magnitude of the hazard or block open pathways.     

城市垃圾预处理改善焚烧特性的探讨

针对目前我国城市垃圾的高水分、低热值的特性,提出了2种改善城市垃圾焚烧特性的有效措施:生物质垃圾源分类和生物干燥.在我国建立生物质垃圾源分类体系,将生物质垃圾源头分类后,剩余垃圾的热值可以提高约50%～120%,已适合直接入炉焚烧,同时分离出来的生物质垃圾也更易于好氧堆肥或厌氧消化.另外一项技术措施是在焚烧前利用生物干燥技术,降低城市垃圾的水分含量,提高入炉垃圾的热值,这种方法主要是利用生物反应热来干燥城市生活垃圾,只需要在垃圾投入焚烧炉前增加一个预处理步骤,不必改变目前的垃圾收运体系,而且进行生物干燥后的垃圾更易于分选其中的可回收物质.     

耐热乳杆菌的分离及在食物垃圾乳酸发酵中的应用

食物垃圾在我国城市生活垃圾中占有较大比重.发酵食物垃圾生产乳酸是实现其资源化的有效方法.从厌氧发酵的食物垃圾中分离到一株耐热乳酸菌TY50,根据形态、生理生化特征和16S rDNA序列,确定该菌株属于乳杆菌属的干酪乳杆菌组群(Lactobacillus casei group),其最高生长温度为52℃.TY50发酵食物垃圾生产乳酸的最佳同液比为1:12,最适温度为45 ℃.在pH 5.5～6.0条件下,发酵食物垃圾产生36.29 g/L的乳酸,乳酸体积产牢和转化率(乳峻/垃圾干重)分别达到1.01 g/(L·h)和0.44.     

废塑料处理技术进展与展望

文章介绍了解决废塑料污染的几种方法,分析了目前我国废塑料回收利用技术的现状,并介绍作者在这方面进行的一些新的研究工作：（1）使用自制的催化剂完成了聚烯烃类塑料催化热解回收燃料油的小试,获得了较好的效果;（2）通过实验对发泡聚苯乙烯热解回收苯乙烯单体的工艺流程提出了优化操作条件。根据国内外实际,文章最后对废塑料回收利用提出了几点建议。     

废旧电池资源化、无害化

对当前国内外在废旧电池的处理处置方面进行了综合性论述,对废旧电池的危害及当前应采取的对策进行分析。