Selection and integration of environmental impacts in the Danish transport infrastructure assessment process

Transport projects have numerous consequences for the environment, society and economy, and thus an EU Directive has stated a number of impacts that need to be assessed prior to any major intervention. This paper is set in a Danish context where the EU requirements have been adopted in the Environmental Impact Assessment (EIA) regulation along with national requirements. In recent years, however, the EIAs have been criticised for an inconsistent inclusion of impacts and unclear assessment process. A selection of EIAs is for this reason reviewed and compared to the EU Directive and corresponding works in Sweden and the UK to identify potential opportunities for improvements. From the literature study, an overview table with all potential relevant impacts for transport projects is set up to assist the EIA process. For the sake of simplicity and transparency, the impacts selected from this table should, however, be further reduced in number to ensure that only the most important impacts are included in the process. To further increase simplicity and transparency in the EIA process, a novel framework for assessing different types of impacts is proposed. In this framework, a comprehensive decision support tool involving stakeholders is in focus. The framework is supplemented with a procedure for generating objectives and presenting results in an appropriate way to the many stakeholders involved. The impacts overview table and the assessment techniques are applied to a case study to illustrate the process, and finally, conclusions and perspectives for future work within the field are set out.     

Pseudomonas sp. ZXY-1, a newly isolated and highly efficient atrazine-degrading bacterium, and optimization of biodegradation using response surface methodology

Atrazine, a widely used herbicide, is increasing the agricultural production effectively, while also causing great environmental concern. Efficient atrazine-degrading bacterium is necessary to removal atrazine rapidly to keep a safe environment. In the present study, a new atrazine-degrading strain ZXY-1, identified as Pseudomonas, was isolated. This new isolated strain has a strong ability to biodegrade atrazine with a high efficiency of 9.09 mg/L/hr.Temperature, p H, inoculum size and initial atrazine concentration were examined to further optimize the degradation of atrazine, and the synthetic effect of these factors were investigated by the response surface methodology. With a high quadratic polynomial mathematical model(R~2= 0.9821) being obtained, the highest biodegradation efficiency of 19.03 mg/L/hr was reached compared to previous reports under the optimal conditions(30.71°C, pH 7.14, 4.23%(V/V) inoculum size and 157.1 mg/L initial atrazine concentration).Overall, this study provided an efficient bacterium and approach that could be potentially useful for the bioremediation of wastewater containing atrazine.     

新型重金属絮凝剂巯基乙酰化羟甲基聚丙烯酰胺的优化制备

为提高含铜废水的处理效果及简化处理流程,以聚丙烯酰胺(PAM)、甲醛、氢氧化钠、巯基乙酸(TGA)为原料,先经羟甲基化反应制备中间产物羟甲基聚丙烯酰胺(MPAM),再通过酰胺化反应将巯基接枝到MPAM分子链上,制备出新型重金属絮凝剂巯基乙酰化羟甲基聚丙烯酰胺(MAMPAM).以水样中Cu(Ⅱ)的去除率为考察目标,采用Plackett-Burman实验、最陡爬坡实验和响应面法中CCD实验优化MAMPAM的制备条件.结果表明,MAMPAM最优制备条件为:MPAM浓度0.31%、MPAM与TGA物质的量比为1∶3.2、反应介质p H值为4.76、反应温度为25℃、反应时间为2 h,在此条件下制备的MAMPAM对Cu(Ⅱ)的去除率为95.30%,与模型的理论预测值94.47%接近,相对偏差仅为0.83%,模型合理可靠.红外分析表明MPAM分子链上成功接上了巯基.MAMPAM对不同初始浓度的含Cu(Ⅱ)水样具有很好的去除效果,Cu(Ⅱ)去除率均能达到90%以上.MAMPAM有望成为一种有效的含铜废水处理剂,具有一定的应用前景.     

后处理设施给水系统可靠性的GO法研究

后处理设施给水系统是后处理设施重要的公用系统,对后处理设施的稳定、安全运行至关重要.给水系统的可靠性需要深入分析,应用GO法进行了研究.获得了给水系统的平均故障概率、最小割集、重要度等可靠性指标.结果表明,给水系统的可靠性比较高,符合单一故障准则,二阶最小割集对系统故障的贡献最大,应该采取措施予以消除.进一步深入对比分析GO法与故障树法,结果显示,对于给水系统的可靠性分析,GO法有建模容易且图形简洁的优点.     

菌株Pseudomonas sp. JF122降解苯酚同时还原Cr(VI)的条件优化及生长特性研究

采用富集培养法,从钢铁厂附近河流污泥中分离筛选到1株能同时降解苯酚与还原Cr(VI)的菌株JF122.在600 mg·L^-1苯酚与1.2 mg·L^-1 Cr(VI) 的条件下,采用单因素实验考察了温度、初始pH、该菌接种量等因素对其同时降解苯酚与还原Cr(VI)的影响,并通过正交试验L₉(3³)获得适宜的苯酚降解与Cr(VI)还原条件.结果表明,菌株JF122降解苯酚与还原Cr(VI)的适宜条件为:30 ℃、初始pH=6和接种量1%,此条件下,菌株JF122在56 h内能够降解600 mg·L^-1苯酚同时还原1.2 mg·L^-1 Cr(VI).应用响应曲面法建立了菌株JF122的生长与温度、初始pH、接种量等因素间关系的数学模型,并对其生长条件进行了优化.结果表明,菌株JF122最优生长条件与其降解苯酚并同时还原Cr(VI)的最优条件具有一致性.     

地下水污染健康风险评价理论体系研究

基于对风险的认识,以地下水为研究载体提出地下水污染健康风险评价的概念.按照风险识别、风险量化、风险管理的步骤构建了地下水污染健康风险评价的理论体系,并对每个步骤进行了详细的描述和研究方法的探讨,提出了判定的原则和方法以及对我国地下水污染健康风险管理的建议,以期为我国地下水资源管理和保护工作提供科学依据.     

浙江省长潭水库水质特征研究

通过对长潭水库进行长期定点的监测和分析,对2006～2011年间长潭水库pH、透明度(SD)、总氮(TN)、总磷(TP)、生化需氧量(BOD)、溶解氧(DO)、叶绿素a的营养状态指数TLI(Chla)等各项指标的达标率以及营养状态进行了整体的分析和评价。结果表明:长潭水库水体现状为中度富营养状态,并以此为指导提出了相应的治理措施,以期为居民的供水安全提供保障。     

县域土地利用规划生态环境影响评价研究——以陇县为例

以生态服务价值理论为指导,从土地利用变化动态度、生态系统服务总价值和生态价值敏感度3个方面评价陇县土地利用总体规划(2006～2020年)对区域生态环境的影响。结果表明,林地、耕地在规划期内生态系统服务价值都呈增长趋势,区域生态系统服务总价值增加了30700万元。     

漓江沉积柱重金属垂向分布特征及污染评价

对桂林漓江3个采样点沉积柱状沉积物中主要重金属元素(Cd、Cr、Cu、Zn、Pb、As和Ni)的垂向分布进行了测定。结果表明:7种重金属元素具有相似的垂向变化特征;横向上表现为靠近市区的含量高远离,市区的含量低。地积累指数评价结果显示,远离市区的沉积柱7种金属污染程度较轻,仅有Cd和Ni属于无～中污染程度。临近市区的沉积柱形成污染的元素为Cd、Cu、Zn、Pb和As,主要集中在底层和次表层。     

房地产新建项目的环境影响预测评价

根据房地产开发项目环境影响评价的方法和准则,分析了新建住宅类建设项目施工期和营运期对环境产生的不良影响,及外环境对住宅小区的环境影响,预测和评价了运营期的大气污染、废水污染及施工期和运营期的噪声污染。结果表明,运营期排放的废水可以满足国家污水排放标准,氮氧化物是运营期大气污染物的主要成分,施工期土石方阶段和结构阶段的噪声排放能满足昼间噪声限值,其余噪声污染全部超出了标准限值。提出了相应的环保措施,总结了住宅建设项目环境影响评价的特点。