Identification of close relationship between atmospheric oxidation and ozone formation regimes in a photochemically active region

Understanding ozone (O₃) formation regime is a prerequisite in formulating an effective O₃ pollution control strategy. Photochemical indicator is a simple and direct method in identifying O₃ formation regimes. Most used indicators are derived from observations, whereas the role of atmospheric oxidation is not in consideration, which is the core driver of O₃ formation. Thus, it may impact accuracy in signaling O₃ formation regimes. In this study, an advanced three-dimensional numerical modeling system was used to investigate the relationship between atmospheric oxidation and O₃ formation regimes during a long-lasting O₃ exceedance event in September 2017 over the Pearl River Delta (PRD) of China. We discovered a clear relationship between atmospheric oxidative capacity and O₃ formation regime. Over eastern PRD, O₃ formation was mainly in a NO_x-limited regime when HO₂/OH ratio was higher than 11, while in a VOC-limited regime when the ratio was lower than 9.5. Over central and western PRD, an HO₂/OH ratio higher than 5 and lower than 2 was indicative of NO_x-limited and VOC-limited regime, respectively. Physical contribution, including horizontal transport and vertical transport, may pose uncertainties on the indication of O₃ formation regime by HO₂/OH ratio. In comparison with other commonly used photochemical indicators, HO₂/OH ratio had the best performance in differentiating O₃ formation regimes. This study highlighted the necessities in using an atmospheric oxidative capacity-based indicator to infer O₃ formation regime, and underscored the importance of characterizing behaviors of radicals to gain insight in atmospheric processes leading to O₃ pollution over a photochemically active region.     

加油站职业健康管理现状与应对措施

从能源企业工作实践出发,分析了加油站存在的主要职业病危害因素,针对加油站职业健康管理工作现状,分析其特点和存在不足,并提出相应的改进策略。     

基于改进社会力模型的地铁大客流疏散能力研究*

为有效应对大客流情景下人群拥挤对地铁站正常运行带来的影响,采用社会力模型和Anylogic仿真软件,对地铁站大客流疏散能力进行建模和分析,从客观、主观、管理视角分析影响客流疏散能力的因素,基于改进社会力模型刻画行人行为,分析影响地铁车站疏散能力的3个关键因素,并以南宁地铁1号线朝阳广场站为背景进行研究。研究结果表明:行人密度是影响地铁站疏散能力的关键因素,出入口选择策略和行人亲属关系比例对疏散能力影响显著,研究结果可为地铁客流疏散提出针对性建议。     

常减压装置常压塔顶腐蚀原因分析与防护

本文以某炼油厂常减压塔顶冷凝冷却系统为研究对象,对该系统发生腐蚀泄漏进行原因分析。通过分析其腐蚀原因,提出了控制腐蚀的措施和方法,从而达到设备长周期运转的目的。     

面向设计的地铁车站防火安全韧性评价*

为提升地铁车站防火安全韧性,以设计方案为切入视角,基于防火安全韧性的吸收、抵抗、恢复和适应能力4个维度,构建基于ANP-熵权法面向设计的地铁防火安全韧性评价指标体系,运用逼近理想解法建立地铁车站防火安全韧性设计评价模型,通过3个已建地铁车站（青岛、沈阳、福州某地铁车站）的设计案例验证该模型的有效性和可行性。研究结果表明:3个应用案例中,沈阳某地铁车站设计防火安全韧性最高,福州某地铁车站设计防火安全韧性最低,需进一步提升防火安全能力。评价结果与各案例的实际运行阶段基本吻合,研究思路和结果对改善地铁车站的防火安全设计具有一定参考意义。     

多层递阶方法在变化环境下非一致性水文序列分析中的应用

由于受人类活动、气候等外界变化环境的影响,用于水资源评价计算的天然年径流量序列失去了一致性。为了适应变化环境对水文预报的要求,提出了基于时变参数的非一致性年径流序列的多层递阶预报方法。该方法不同于传统带固定参数的模型,它是将预报对象看作为随机动态时变系统,首先进行动态系统的时变参数预报,进而在参数预报基础之上对系统状态预报,从而提高了预测结果的可靠性。以闽江竹岐水文站为例,进行年径流量的中长期预报,为区域水资源的优化管理提供科学的依据。     

基于遥感的巢湖悬浮泥沙分布的环境背景分析

悬浮泥沙是重要的水质参数之一,对水体透明度、浑浊度、水色等光学性质及水生生态条件产生直接影响,水体的含沙量及其动态变化对区域水下地貌的发展及冲淤变化等具有非常重要的影响. 以巢湖为例,通过对不同含沙量的水体进行光谱特征分析,提出了用泥沙指数来提取泥沙分布的方法. 利用ETM+(TM)数据得到了巢湖湖区2个时相的泥沙分布图,并对巢湖悬浮泥沙分布的环境背景进行分析,指出巢湖泥沙的来源主要是各入湖河流携带的泥沙,其次是岸坡崩塌物形成的.      

基于稳健统计的土壤环境背景值研究及应用

使用稳健统计方法中的位置估计量和尺度估计量对我国某受到人为干扰的地下水水源地C层土壤重金属的背景值进行了研究.结果表明,稳健统计方法对样本中的异常值有较高的耐抗性,计算结果与常规方法相近,因而适用于某些人为干扰地区的土壤环境背景值研究.对该水源地背景值的计算表明,该地区C层土壤Cu,Pb,Cd,Cr,As和Hg的背景值中心分别为21.2,32.5,0.103,60.3,11.0和0.012 mg/kg,其中w(Pb),w(Cd)和w(As)高于山东省平均值. 6种重金属的阈值分别为29.0,43.7,0.143,93.5,21.0和0.080 mg/kg,均小于全国平均上限值,但其中Pb,Cr,As的阈值高于土壤环境质量一级标准. 基于该地区背景值的污染累积指数评价表明,该地区主要重金属污染物为Pb和Hg,主要污染区为污水沟渠周边,污染深度为1～3 m.      

Validation of modeling approach to evaluate congener-specific concentrations of polychlorinated dibenzo-p-dioxins and dibenzofurans in air and soil near a solid waste incinerator.

A concise modeling approach using long-term averaged meteorological data was developed to estimate site-specific concentrations of congeners of polychlorinated dibenzo-p-dioxins and dibenzofurans (PCDD/Fs) near a solid waste incinerator. This approach consists of calculation of atmospheric dispersion, dry and wet deposition of gaseous and particle-bound congeners, and non-steady-state concentrations in soil. The predictability of this approach was evaluated by comparison of calculated concentrations of congeners in soil with those measured at eight locations near a municipal solid waste incinerator (MSWI). The variation of these concentrations due to variability of meteorological parameters is small. A considerable number of mean values show good agreement with measured concentrations within a factor of three. The reasonable agreement between calculated and measured concentrations indicates that algorithms for the calculation of vapor-phase deposition and non-steady-state concentrations in soil must be included in the modeling approach for an accurate estimation of the concentrations of congeners of PCDD/Fs emitted from MSWIs to the atmosphere. For a detailed estimation of site-specific concentrations, it is important to specify the bulk density of soil in the evaluated area, together with meteorological parameters.     

Handedness, Hand Roles, and Hand Injuries at Work

Hand injuries form a significant proportion of all workplace injuries. They are costly to treat, and lead to significant loss of time at work. This paper has two parts. First, there is a review of the literature that discusses prevalence of hand injury, and the significance of hand roles and handedness in industrial injuries. The second part represents an initial attempt to document the roles of the two hands in a particular industry, the metal manufacturing industry. The purpose of this survey of 30 different work stations in seven different industrial plants was to see whether there is a significant bias in terms of movement requirements for one or the other hand, leading to a possible differential risk of injury for the left and right hands. Overall, there was no clear bias favoring the right hand in activities assigned to the hands in seven different movement categories (MTM). However, the location of emergency controls favored the right hand unequivocally. The implications of biases favoring the left/right hand for safety of machine operation are discussed in the light of current findings on left/right hand performance in right- and lefthanders.