大气污染物影响因素的灰色关联分析

运用灰色系统理论，对产生和影响城市大气主要污染物的相关因素，利用灰色关联分析方法进行了量化分析研究，根据研究结果，提出了控制大气污染的防治对策．     

天津港运输船舶大气污染物排放清单

运输船舶产生的大气污染物对港口大气环境有重要影响,但我国对这部分内容的研究却相当薄弱.本文首先对天津港运输船舶的总体情况进行调研,根据其排放控制技术水平合理选择了排放因子;而后采用基于燃料消耗的方法,对2006年天津港运输船舶排放的NOx、HC、CO和PM_(10)进行了计算,建立了天津港运输船舶大气污染物的排放清单;最后对2010年和2020年天津港的运输船舶大气污染排放情况进行了预测.该清单的估算和预测可以为加强排放控制和制定相关法规提供重要依据.     

沈阳市烟囱分布对大气污染的影响

本文介绍采用航空遥感技术和实地调查研究相结合的方法,分析了沈阳市烟囱数量、高度、密度以及高、中、低架烟囱的分布状况和特点,同时与大气污染监测结果对照分析了沈阳市煤烟型大气污染的规律及特点,研究了沈阳市烟囱分布对大气污染的影响。最后,提出了沈阳市燃煤污染的防治途径。     

Heavy metals in bark of <Emphasis Type="Italic">Pinus massoniana</Emphasis> (Lamb.) as an indicator of atmospheric deposition near a smeltery at Qujiang,China

Goal, Scope and Background Rapid urbanization and the expansion of industrial activities in the past several decades have led to large increases in emissions of pollutants in the Pearl River Delta of south China. Recent reports have suggested that industrial emission is a major factor contributing to the damages in current natural ecosystem in the Delta area. Tree barks have been used successfully to monitor the levels of atmospheric metal deposition in many areas, but rarely in China. This study aimed at determining whether atmospheric heavy metal deposition from a Pb-Zn smeltery at Qujiang, Guangdong province, could be accurately reflected both in the inner bark and the outer bark of Masson pine (Pinus massoniana L.). The impact of the emission from smeltery on the soils beneath the trees and the relationships of the concentrations between the soils and the barks were also analyzed. Methods Barks around the bole of Pinus massoniana from a pine forest near a Pb-Zn smeltery at Qujiang and a reference forest at Dinghushan natural reserve were sampled with a stainless knife at an average height of 1.5 m above the ground. Mosses and lichens on the surface barks were cleaned prior to sampling. The samples were carefully divided into the inner bark (living part) and the outer bark (dead part) in the laboratory, and dried and ground, respectively. After being dry-ashed, the powder of the barks was dissolved in HNO₃. The solutions were analyzed for iron (Fe), manganese (Mn), copper (Cu), zinc (Zn), chromium (Cr), nickel (Ni) and cobalt (Co) by inductively coupled plasmas emission spectrometry (ICP, PS-1000AT, USA) and Cadmium (Cd) and lead (Pb) by graphite furnace atomic absorption spectrometry (GFAAS, ZEENIT 60, Germany). Surface soils (0–10 cm) beneath the sample trees were also collected and analyzed for the selected metals. Results and Discussion Concentrations of the selected metals in soils at Qujiang were far above their environmental background values in the area, except for Fe and Mn, whilst at Dinghushan, they were far below their background values, except for Cd and Co. Levels of the metals, in particular Pb and Zn, in the soils beneath the sample trees at Qujiang were higher than those at Dinghushan with statistical significance. The result suggested that the pine forest soils at Qujiang had a great input of heavy metals from wet and dry atmospheric deposition, with the Pb-Zn smeltery most probably being the source. Levels of Cu, Fe, Mn, Zn, Ni and Pb at Qujiang, both in the inner and the outer bark, were statistically higher than those at Dinghushan. Higher concentrations of Pb, Fe, Zn and Cu may come from the stem-flow of elements leached from the canopy, soil splash on the 1.5 m height and sorption of metals in the mosses and lichens growing on the bark, which were direct or indirect results from the atmospheric deposition. Levels of heavy metals in the outer barks were associated well with the metal concentrations in the soil, reflecting the close relationships between the metal atmospheric deposition and their accumulation in the outer bark of Masson pine. The significant (p<0.01) correlations of Fe-Cu, Fe-Cr, Fe-Pb, Fe-Ni, Pb-Ni, and Pb-Zn in the outer barks at Qujiang again suggested a common source for the metals. The correlation only occurred between Pb and Ni, Cd and Co in the outer barks at Dinghushan, which suggested that those metals must possibly have other uncommon sources. Conclusions Atmospheric deposition of the selected metals was great at Qujiang, based on the levels in the bark of Pinus massoniana and on the concentrations in the soils beneath the trees compared with that at Dinghushan. Bark of Pinus massoniana, especially the outer bark, was an indicator of metal loading at least at the time of sampling. Recommendations and Perspectives The results from this study and the techniques employed constituted a new contribution to the development of biogeochemical methods for environmental monitoring particularly in areas with high frequency of pollution in China. The method would be of value for follow up studies aimed at the assessment of industrial pollution in other areas similar with the Pearl River Delta.     

常减压装置常压塔顶腐蚀原因分析与防护

本文以某炼油厂常减压塔顶冷凝冷却系统为研究对象,对该系统发生腐蚀泄漏进行原因分析。通过分析其腐蚀原因,提出了控制腐蚀的措施和方法,从而达到设备长周期运转的目的。     

大气扰动下人－机系统建模与仿真

建立了人、机、大气环境扰动的动力学模型。形成一个便于仿真计算的人－机－环境系统模型，针对驾驶员完成俯仰跟踪任务，研究了大气扰动对驾驶员控制特性和人－机闭环特性的影响。     

南山铁矿风场及扩散规律风洞模拟研究

以风洞模拟方式研究中性层结条件下南山铁矿凹山采场地域边界层风场特征,并以示踪气体扩散摸拟方法给出该地域大气扩散参数的实验结果。     

Ammonia large scale atmospheric dispersion experiments in industrial configurations

A programme of large-scale experiments for atmospheric dispersion was carried out by INERIS over a period extending from December 1996 to April 1997. The objectives of the test campaign were to measure anhydrous ammonia concentrations in a range of few meters to 2 km from the release, in order to generate data to be used to improve 2-phase discharge and dispersion modelling.

The discharges were released from a 6-tonne storage tank of pressurised liquid ammonia and through a discharge device with an outlet diameter of 2 in. Fifteen trials were carried out with various release configurations corresponding to industrial situations (impinging jets on the ground and on a wall at various distances, release through a flange without seal…). The quantity of ammonia discharged from the liquid phase varied according to the tests, from 1.4 to 3.5 tons for durations between 7 and 14 min and, therefore, at flow rates between 2 and 4.5 kg/s. Approximately 200 sensors were settled downwind to measure ammonia concentrations and temperature in the plume. These tests showed that for discharges with identical flow rates the distances corresponding to the same concentration vary a lot according to the configurations. These distances tend to be reduced by the presence of obstacles or retention dikes that collected liquid ammonia. In the paper, the main experimental results are presented. In order to enable the comparisons with numerical predictions, more detailed information are given in [Bouet R. (1999). Ammoniac—Essais de dispersion atmosphérique à grande échelle. INERIS rapport, ref INERIS-DRA-RBo-1999-20410 (available at http://www.ineris.fr/recherches/recherches.htm).     

Comprehensive and high-resolution emission inventory of atmospheric pollutants for the northernmost cities agglomeration of Harbin-Changchun, China: Implications for local atmospheric environment management

Using a bottom-up estimation method, a comprehensive, high-resolution emission inventory of gaseous and particulate atmospheric pollutants for multiple anthropogenic sectors with typical local sources has been developed for the Harbin-Changchun city agglomeration (HCA). The annual emissions for CO, NOx, SO₂, NH₃, VOC_S, PM_2.5, PM₁₀, BC and OC during 2017 in the HCA were estimated to be 5.82 Tg, 0.70 Tg, 0.34 Tg, 0.75 Tg, 0.81Tg, 0.67 Tg, 1.59 Tg, 0.12 Tg and 0.26 Tg, respectively. For PM₁₀ and SO₂, the emissions from industry processes were the dominant contributors representing 54.7% and 49.5%, respectively, of the total emissions, while 95.3% and 44.5% of the total NH₃ and NOx emissions, respectively, were from or associated with agricultural activities and transportation. Spatiotemporal distributions showed that most emissions (except NH₃) occurred in November to March and were concentrated in the central cities of Changchun and Harbin and the surrounding cities. Open burning of straw made an important contribution to PM_2.5 in the central regions of the northeastern plain during autumn and spring, while domestic coal combustion for heating purposes was significant with respect to SO₂ and PM_2.5 emissions during autumn and winter. Furthermore, based on Principal Component Analysis and Multivariable Linear Regression model, air temperature, relative humidity, electricity and energy consumption, and the urban and rural population were optimized to be representative indicators for rapidly assessing the magnitude of regional atmospheric pollutants in the HCA. Such indicators and equations were demonstrated to be useful for local atmospheric environment management.     

影响大气汞化学过程的敏感因子分析

为了分析汞在大气中的化学行为,在一个化学模式中加入汞的气相、气液平衡和液相反应,模拟大气汞及其化合物的演变规律,并分析了气象因子(云、光解率、温度)和化学因子(气态O3、H2O2、HO2、OH和气态零价汞Hg0(g))的初始体积分数对各形态汞及其化合物浓度和Hg0(g)转化率的影响.模拟结果表明,在中等大气污染条件下,Hg0(g)的每小时平均转化率为2.91%.敏感性试验结果表明,云量、光解率、温度、O3和Hg0(g)的初始体积分数对不同形态汞的影响较为显著.云量的增加、光解率的增加、臭氧初始体积分数的升高,各形态汞的平衡时间缩短,除气态氧化汞和一价汞离子外,其他形态汞的平衡浓度均会降低,Hg0(g)的转化率增加.温度增加将抑制Hg0(g)的转化.Hg0(g)的初始体积分数增加,各形态汞的浓度升高,但其平均转化率没有显著变化.不同因子对汞化学过程的相对作用对区域或全球大气汞的环境模拟具有指导意义.