Effects of soiling and cleaning on the reflectance and solar heat gain of a light-colored roofing membrane

A roof with high solar reflectance and high thermal emittance (e.g., a white roof) stays cool in the sun, reducing cooling power demand in a conditioned building and increasing summertime comfort in an unconditioned building. The high initial solar reflectance of a white membrane roof (circa 0.8) can be lowered by deposition of soot, dust, and/or biomass (e.g., fungi or algae) to about 0.6; degraded solar reflectances range from 0.3 to 0.8, depending on exposure. We investigate the effects of soiling and cleaning on the solar spectral reflectances and solar absorptances of 15 initially white or light-gray polyvinyl chloride membrane samples taken from roofs across the United States. Black carbon and organic carbon were the two identifiable strongly absorbing contaminants on the membranes. Wiping was effective at removing black carbon, and less so at removing organic carbon. Rinsing and/or washing removed nearly all of the remaining soil layer, with the exception of (a) thin layers of organic carbon and (b) isolated dark spots of biomass. Bleach was required to clear these last two features. At the most soiled location on each membrane, the ratio of solar reflectance to unsoiled solar reflectance (a measure of cleanliness) ranged from 0.41 to 0.89 for the soiled samples; 0.53 to 0.95 for the wiped samples; 0.74 to 0.98 for the rinsed samples; 0.79 to 1.00 for the washed samples; and 0.94 to 1.02 for the bleached samples. However, the influences of membrane soiling and cleaning on roof heat gain are better gauged by fractional variations in solar absorptance. Solar absorptance ratios (indicating solar heat gain relative to that of an unsoiled membrane) ranged from 1.4 to 3.5 for the soiled samples; 1.1 to 3.1 for the wiped samples; 1.0 to 2.0 for the rinsed samples; 1.0 to 1.9 for the washed samples; and 0.9 to 1.3 for the bleached samples.     

粉煤灰处理煤矿酸性废水的研究

采用石灰石中和沉淀，粉煤灰吸附处理煤矿酸性废水，取得了良好的效果。用石灰石调节pH至4.5，再用石灰中和至中性，并用粉煤灰吸附，粉煤灰用量为10g／L时处理效果较好。     

原子吸收光谱在石化领域的应用

简述了近十几年来原子吸收光谱在我国石油化学工业领域的应用及进展，全文分原油及其加工产品，化工物品，催化剂添加剂等几类样品阐述。     

土壤中铅的平台石墨炉原子吸收法测定

采用悬浮液进样,以平台石墨炉原子吸收法直接测定土壤中的铅。通过180目筛孔的土壤样,可均匀、稳定地悬浮于0.2％(W/V)琼脂液中。方法的相对标准偏差为1.2％～5％;回收率为93％～110％;进样10μl ,检出限为21.4pg。与火焰原子吸收法对照,两者测定结果相吻合。     

火焰原子吸收法测定人体元素含量的研究

应用火焰原子吸收法，对123个人体发样中微量元素铜、铅、锌、铁、钙进行测定。分析微量元素在不同年龄段含量变化情况和原因，对其进行探讨，并提出自己对儿童成长过程中微量元素含量变化的建议和看法。     

染料中铅的测定

硝酸和双氧水进行消解 ,用石墨炉原子吸收光度法测定染料中的铅。     

蔬菜对大气汞和土壤吸收的研究

通过田间观测和盆栽试验研究了蔬菜富集汞的特性及土壤、大气对蔬菜汞的贡献。对田间 11种蔬菜的研究发现 ,蔬菜根和叶的含汞浓度高于茎和果 ;在自然条件下 ,蔬菜所吸收的汞 60 %以上分布于地上部的可食部分。盆栽试验结果表明 ,在气汞浓度为 5 7.6± 14.7ng· m- 3条件下 ,红萝卜、莴苣叶 (可食部分 )的含汞浓度超过了食品卫生标准 ;气汞、土壤汞对蔬菜汞的贡献率分别为 70 .4～ 90 .7%、9.3～ 2 9.6% ,气汞较土壤汞是蔬菜更为重要的汞源     

Determination of Cd,Cr, Cu,Pb and Zn from various water samples with use of FAAS techniques after the solid phase extraction on rice bran

A facile and novel method has been developed for the determination of cadmium, chromium, copper, lead, and zinc from various water samples using FAAS. In the present investigation, a syringe was loaded with sorbent (rice bran) for the separation and enrichment of cadmium, chromium, copper, lead, and zinc, prior to their analysis by flame atomic absorption spectrometry which was described to substitute the batch and column techniques. The syringe was loaded with 2.0 g of sorbent in order to retain the analyte elements. Six milliliter of sample solution (pH 8.0 ± 0.2) was drawn into the syringe in 15 s and discharged over a period of 15 s. Then, 2.0 M HCl eluent was drawn into the syringe and ejected back to desorb the analyte elements. At the optimum conditions, the percentage recoveries of Cd, Cr, Cu, Pb, and Zn was in the range of 95.5–99.4% with SD of 0.10%. The elements could be concentrated by drawing and discharging several portions of sample successively. The detailed study of various interferences made the confirmation of the method highly selective. The risk of contamination is less than that with the column technique. The method was successfully applied for the determination of Cd, Cr, Cu, Pb, and Zn in spiked and natural water samples. The results obtained are in good agreement with the reported methods at the 95% confidence level.     

Absorption and recovery of n-hexane in aqueous solutions of fluorocarbon surfactants

n-Hexane is widely used in industrial production as an organic solvent. As an industrial exhaust gas, the contribution of n-hexane to air pollution and damage to human health are attracting increasing attention. In the present study, aqueous solutions of two fluorocarbon surfactants(FSN100 and FSO100) were investigated for their properties of solubilization and dynamic absorption of n-hexane, as well as their capacity for regeneration and n-hexane recovery by thermal distillation. The results show that the two fluorocarbon surfactants enhance dissolution and absorption of n-hexane, and their effectiveness is closely related to their concentrations in solution. For low concentration solutions(0.01%–0.30%), the partition coefficient decreases dramatically and the saturation capacity increases significantly with increasing concentration, but the changes for both are more modest when the concentration is over 0.30%. The FSO100 solution presents a smaller partition coefficient and a greater saturation capacity than the FSN100 solution at the same concentration,indicating a stronger solubilization for n-hexane. Thermal distillation is a feasible method to recover n-hexane from these absorption solutions, and to regenerate them. With 90 sec heating at 80–85°C, the recovery of n-hexane ranges between 81% and 85%, and the regenerated absorption solution maintains its original performance during reuse. This study provides basic information on two fluorocarbon surfactants for application in the treatment of industrial n-hexane waste gases.     

用Excel制作环境监测声像报告

阐述了运用办公自动化应用软件电子表格Ｅｘｃｅｌ制作及播放新型声像片的方法，并以环境监测工作中的实例介绍了具体的制作过程。