石英砂滤料表面润湿改性

采用硅烷偶联剂、钛酸酯偶联剂和铝酸酯偶联剂对石英砂进行表面改性,以制备亲油疏水性滤料。研究得出,钛酸酯偶联剂改性石英砂的最佳工艺条件为:偶联剂用量15%,反应温度90℃,搅拌时间15 min;硅烷偶联剂和铝酸酯偶联剂改性石英砂的最佳工艺条件均为:偶联剂用量15%,反应温度110℃,搅拌时间15 min。水对钛酸酯偶联剂改性石英砂滤料的润湿重量由改性前的1.5589 g降低到0.0282 g,水对硅烷偶联剂改性石英砂滤料的润湿重量降低到0.0607 g,水对铝酸酯改性石英砂滤料的润湿重量降低到0.2664 g。静态吸附实验表明,硅烷偶联剂、钛酸酯偶联剂和铝酸酯偶联剂改性石英砂滤料对油的吸附容量分别增加了33.67%、42.87%和22.30%。XPS和FT-IR分析表明,偶联剂均以化学键的方式包覆在石英砂滤料表面,结合稳定。     

Prediction of Streamflow Regime and Annual Runoff for Ungauged Basins Using a Distributed Monthly Water Balance Model1

Moore, R.D. (Dan), J.W. Trubilowicz, and J.M. Buttle, 2011. Prediction of Streamflow Regime and Annual Runoff for Ungauged Basins Using a Distributed Monthly Water Balance Model. Journal of the American Water Resources Association (JAWRA) 48(1): 32‐42. DOI: 10.1111/j.1752‐1688.2011.00595.x Abstract: Prediction of streamflow in ungauged basins is a global challenge, but is particularly an issue in physiographically complex regions like British Columbia (BC), Canada. The objective of this study was to assess the accuracy of a simple water balance model that can be run using existing spatial datasets. The model was developed by modifying an existing monthly water balance model to account for interception loss from forest canopy, glacier melt, and evaporation from lakes. The model was run using monthly climate normals from the ClimateBC application, which have a horizontal resolution of 400 m. Each ClimateBC grid cell was classified as forest, open land, glacier or water surface based on provincial scale digital maps of biogeoclimatic zones, glaciers, and water. The output was monthly mean runoff from each grid cell. These values were integrated within the catchment boundaries for streams gauged by the Water Survey of Canada. Annual runoff was predicted with modest accuracy: after updating the predicted runoff by interpolating errors from neighboring gauged streams, the mean absolute error was 25.4% of the gauged value, and 52% of the streams had errors less than 20%. However, the model appears to be quite robust in distinguishing between pluvial, hybrid, and melt‐dominated hydroclimatic regimes, and therefore has promise as a tool for catchment classification.     

脂肽类生物表面活性剂液体发酵条件的响应面优化

通过Plackett-Burman和Box-Behnken实验对解淀粉芽孢杆菌XZ-173液体发酵生产表面活性素进行了响应面优化研究。首先使用Plackett-Burman实验对影响表面活性素产量的17个因素进行显著性筛选,结果表明,MnSO4、CuSO4、温度和转速为显著性因素。再运用Box-Behnken实验对这4个显著因素的取值进一步优化,得到各因素优化后的数值分别为4.4 mg/L(MnSO4)、0.18 mg/L(CuSO4)、29℃(温度)和163 r/min(转速)。响应面分析结果表明:该菌株产生表面活性素的最佳培养基为:葡萄糖15 g/L,蛋白胨5 g/L,L-谷氨酸钠6 g/L,KH2PO40.8 g/L,MgSO40.4 g/L,KCl 0.4 g/L,酵母提取物3 g/L,L-苯丙氨酸2.5 mg/L,MnSO44.4 mg/L,CuSO40.18 mg/L,FeSO40.12 mg/L;最适培养条件:pH 7.5,温度29℃,转速163 r/min,接种量5%,装液量50 mL/250 mL,摇床培养36 h。在优化后的条件下,表面活性素实际产量为336 mg/L,实际实验结果与模型预测结果相一致。表面活性素采用HPLC技术分离,发现其在浓度仅为50 mg/L时EI24就可达到70%以上,反映了表面活性素优异的乳化活性以及广阔的应用前景。     

Evaluation of the National Land Cover Database for Hydrologic Applications in Urban and Suburban Baltimore,Maryland1

Smith, Monica Lipscomb, Weiqi Zhou, Mary Cadenasso, Morgan Grove, and Lawrence E. Band, 2010. Evaluation of the National Land Cover Database for Hydrologic Applications in Urban and Suburban Baltimore, Maryland. Journal of the American Water Resources Association (JAWRA) 46(2):429-442. DOI: 10.1111/j.1752-1688.2009.00412.x Abstract: We compared the National Land Cover Database (NLCD) 2001 land cover, impervious, and canopy data products to land cover data derived from 0.6-m resolution three-band digital imagery and ancillary data. We conducted this comparison at the 1 km², 9 km², and gauged watershed scales within the Baltimore Ecosystem Study to determine the usefulness and limitations of the NLCD in heterogeneous urban to exurban environments for the determination of land-cover information for hydrological applications. Although the NLCD canopy and impervious data are significantly correlated with the high-resolution land-cover dataset, both layers exhibit bias at <10 and >70% cover. The ratio of total impervious area and connected impervious area differs along the range of percent imperviousness – at low percent imperviousness, the NLCD is a better predictor of pavement alone, whereas at higher percent imperviousness, buildings and pavement together more resemble NLCD impervious estimates. The land-cover composition and range for each NLCD urban land category (developed open space, low-intensity, medium-intensity, and high-intensity developed) is more variable in areas of low-intensity development. Fine-vegetation land-cover/lawn area is incorporated in a large number of land use categories with no ability to extract this land cover from the NLCD. These findings reveal that the NLCD may yield important biases in urban, suburban, and exurban hydrologic analyses where land cover is characterized by fine-scale spatial heterogeneity.     

Measurements of surface contamination of spray equipment with pesticides after various methods of application

Abstract

A traditional method to determine operator dermal exposure is to quantify the amount of pesticide coming into contact with specific body regions and then to integrate the deposition density values with the total body surface. It is known that extremely high deposition values may occur in the hand region; however, the source of contamination is generally assumed to be direct splash or contact with the pesticide container. One of the parameters affecting operator/pilot exposure could be the transfer of pesticide residue, particularly in the case of pesticides with a longer half‐life, from contaminated surfaces of spray equipment by direct contact over extended periods. If the rate of skin absorption of pesticide is readily known, the expected values of daily dose for an operator or pilot may significantly rise due to the extended contact period. This study produced field data on the surface contamination of spray equipment used for ground and aerial applications. If field data on precise work practice (time‐motion) observations are incorporated, it may be possible to estimate the potential exposure of operator/pilot due to hand contact with contaminated surfaces.     

响应面优化CCl4增强超声降解左旋氧氟沙星模拟废水

利用响应面优化实验设计方法对CCl₄增强超声降解左旋氧氟沙星模拟废水的影响因素进行探讨和分析,考察了溶液初始pH值、超声功率、左旋氧氟沙星初始浓度的影响。应用Box-Behnken中心组合设计得到一个二次多项式数学模型,确定了US/CCl₄降解左旋氧氟沙星的优化条件:初始pH值6.8,超声功率189 W,左旋氧氟沙星初始浓度为5 mg/L时,左旋氧氟沙星的去除率达到最大(82.99%)。经实验验证, 实际值与模型预测值吻合性良好,偏差仅为0.036%。     

AA3流动注射仪快速测定地表水中的总氰化物

在反复实验的基础上建立了运用Bran+Luebbe AutoAnalyzer 3流动注射分析仪快速测定地表水中总氰化物的分析方法。结果表明,该方法与传统的分光光度法相比,具有自动进样、分析速度快、测定成本低等优点。与经典的分析方法相对照,结果无显著性差异,能够满足大批量地表水监测的要求。在测试系统中引入了恒温槽,进一步提高了测试的精密度和准确度。     

ZJR型涂料的制备及特性研究

利用溶胶凝胶法制备TiO2光催化剂,使用磷酸氢二钠、十水合四硼酸钠和氢氧化镁等制备了阻燃体系料,复合后制成ZJR涂料。利用热分析仪分析纳米TiO2和阻燃体系复合的防火涂料的温度与热失率关系,并得到热重与微商热重曲线。550~650℃之间,失重率约为11%,ZJR涂料在400~600℃有较好的阻燃效果。该涂料对污染气体的光催化降解研究结果表明:光照60 m in后,对二氧化硫的降解率为90.40%,紫外光照40 m in后,甲醛气体降解率为68.98%。进一步添加聚乙二醇和银离子使涂料改性,使涂料光催化甲醛的活性分别提高了11%和14%,效果显著。     

微波加热对活性炭表面基团及其对SO2吸附性能的影响

采用了微波加热技术,通过在不同微波功率和辐射时间条件下对不同粒径活性炭进行改性,研究了改性前后活性炭的表面化学基团、元素组成的变化,以及对SO2吸附性能的影响.结果表明,经过微波改性后活性炭的SO2吸附性能大为提高,微波功率是影响改性活性炭脱硫性能的主要因素.活性炭经微波热处理后,酸性基团发生分解,表面含氧量减少,碱性特征增强,是吸附性能增加的主要原因之一.     

铝件表面处理废水治理所得化学污泥的再生利用研究

对混凝法处理铝件表面处理废水治理所得化学污泥再生利用进行了研究,得到了适宜的操作条件.结果表明,用浓硫酸溶解污泥的最佳用量为0.14～0.16 mL/g湿污泥,湿污泥的溶解率可达90%,铝的溶出率也可达95%以上.把污泥的溶解液作混凝剂回用于印染废水的混凝处理也取得了良好的效果,其COD去除率≥80%,脱色率≥90%.实现了资源的二次利用,改善了作业环境,获得了较好的经济效益和社会效益.