Pure-culture and enzymatic assay for starch-polyethylene degradable plastic biodegradation withStreptomyces species

Eleven starch-polyethylene degradable plastic films were prepared from masterbatches from Archer Daniels Midland Inc. (ADM), EcoStar Inc. (SLS), and Fully Compounded Plastic Inc. The biodegradability of initial and 70°C heat-treated materials was determined using a pure-culture assay withStreptomyces badius 252,S. setonii 75Vi2, orS. viridosporus T7A or without bacterial culture (control). Films were treated with 10-foldS. setonii culture concentrates and compared with inactive enzyme controls. Changes in each films mechanical property, molecular weight distribution, and Fourier-transformed infrared spectrum (FT-IR) were determined, and results were evaluated for significant differences by analysis of variance. Cell mass accumulation on each film was quite pronounced. In pure-culture studies, biodegradation was demonstrated for ADM-7 and SLS-2 initial films and for ADM-6 heat-treated films, whereas after 3-week treatment with activeS. setonii culture concentrates (enzyme assay), reductions in mechanical properties and changes in FT-IR spectrum were illustrated by all the films except SLS-2. Thus the absence of biofilm formation on the film surface permitted enzymatic attack of the materials. Furthermore, inhibition of chemical oxidative degradation in the pure-culture assay was demonstrated for ADM-11, SLS-5, and SLS-10 initial materials and for ADM-4, ADM-7, SLS-8, and SLS-10 heat-treated films. These data suggest that biological and chemical degradation were directly affected by the reduction in oxygen tension on the plastic film surface due to cell mass accumulation. This same phenomenon could be the cause for slow degradation rates in nature.Journal Paper No. J-15061 of the Iowa Agriculture and Home Economics Experiment Station, Ames, Iowa. Project Nos. 0178 and 2889.     

Starch-plastic materials—Preparation,physical properties,and biodegradability (a review of recent USDA research)

Recent starch-plastic research at the National Center for Agricultural Utilization Research is reviewed and related worldwide efforts are noted. Properties of starch that influence its formulation and performance in plastics are discussed. Methods are given for preparation of starch-poly(methyl acrylate) graft copolymer, starch-poly(ethylene-co-acrylic acid), and starch-poly(ethylene-co-acrylic acid)-polyethylene plastics. Their physical properties are discussed, as is degradability by enzymes or amylolytic organisms from soil, ponds, and streams.The mention of firm names or trade products does not imply that they are endorsed or recommended by the U.S. Department of Agriculture over other firms or similar products not mentioned.     

The biodegradation of blends of polycaprolactone and polyethylene exposed to a defined consortium of fungi

Polycaprolactone, polyethylene, and blends of polycaprolactone and polyethylene—in which the portion of polycaprolactone was 80 and 10%—were exposed for periods of from 1 to 16 weeks to a consortium of five fungi in a nutrient salt medium containing 0.8 mg/ml potato dextrose. After exposure the samples were cleaned, dried, and analyzed for weight loss, changes in their molecular weight distribution as determined by gel permeation chromatography, molecular changes as seen by Fourier transform infrared spectrometry (FT-IR), and changes in tensile strength. Tensile strength of polycaprolactone began to decrease after 1 week of exposure, even though the molecular weight distribution showed no change. FT-IR spectra indicated a loss of amorphous polycaprolactone from the surface of samples.Certain commercial products ae identified in order to specify experimental procedures adequately. In no case does such identification imply endorsement by the National Institute of Standards and Technology or that the material is necessarily the best available for the purpose.     

Study of the Determination of the Ultimate Aerobic Biodegradability of Plastic Materials Under Controlled Composting Conditions

Several ISO standards for determining the ultimate aerobic/anaerobic biodegradability of plastic materials have been published. In particular, ISO 14855-1 is a common test method that measures evolved carbon dioxide using such methods as continuous infrared analysis, gas chromatography or titration and others (ISO 14855-1(2005.9)). This method is a small-scale test for determining the ultimate aerobic biodegradability of plastic materials, where the amounts of compost inoculum and test sample in one tenth comparing with that of ISO 14855-1. This method is well versed in ISO/DIS 14855-2 which the carbon dioxide evolved from test vessel is determined by gravimetric analysis of carbon dioxide absorbent. The focus of this study is to elucidate statistically the results of round robin test by seven countries used MODA, which were various deviations among the experiments.     

The influence of system complexity on bacterial transport in saturated porous media

A series of miscible-displacement column experiments were conducted under saturated flow conditions to systematically investigate the influence of physical and biological complexity on bacterial activity and fate in the presence and absence of a non-sorbing growth substrate, salicylate. Bacterial elution was monitored for three different systems; System I--a sterilized, inoculated, well-sorted sand, System II--a sterilized, inoculated, heterogeneous loamy sand (Hayhook), and System III--two different unsterilized loamy sands (Hayhook and Vinton) each with their associated indigenous microbial community. Results show that System I behaved ideally with respect to both cell and substrate transport, wherein: (1) growth occurred in response to substrate addition, (2) cell elution increased in response to the substrate pulse, and (3) breakthrough curves were reproducible for both substrate and cell elution. In contrast, System II showed ideal behavior with respect to substrate transport but showed variable behavior for cell transport. Further, there was no measurable growth in response to substrate addition and no increase in cell elution during the salicylate pulse. System III exhibited non-ideal behavior for both substrate and cell transport. Of particular interest is the fact that the indigenous communities of the two soils behaved differently. Specifically, for the Hayhook soil, an increased elution response was observed for the heterotrophic population while the salicylate-degrading community was preferentially retained in the column. In contrast for the Vinton soil, the substrate pulse did not elicit an elution response from either the heterotrophic or salicylate-degrading community from the culturable, indigenous Vinton microorganisms. For Systems II and III, the observed variability appears to be associated with the biological component of the system, since sterile controls were reproducible. This type of systematic study is critical for understanding cell and substrate transport behavior in complex, heterogeneous systems, and illustrates the potential uncertainty associated with measurements in such systems.     

污水处理中17β-雌二醇的去除机理研究

介绍了污水处理中17β-雌二醇（E2）的去除机理及其去除效果的影响因素。研究表明,E2是生活污水中普遍存在,最具潜在影响、作用最强的一种类固醇雌激素;污水处理过程中,活性污泥吸附作用可使E2浓度迅速降低,而生物降解是去除E2的主要方式且去除过程遵循一级反应,E1是E2生物降解过程中的中间产物。在好氧条件下,提高温度、延长水力停留时间和泥龄、强化硝化等均可一定程度上提高E2的去除效率。     

Transport and biodegradation of creosote compounds in clayey till, a field experiment

The transport and biodegradation of 12 organic compounds (toluene, phenol, o-cresol, 2,6-, 3,5-dimethylphenol, naphthalene, 1-methylnaphthalene, benzothiophene, dibenzofuran, indole, acridine, and quinoline) were studied at a field site located on the island of Funen, Denmark, where a clayey till 10–15 m deep overlies a sandy aquifer. The upper 4.8 m of till is highly fractured and the upper 2.5 m contains numerous root and worm holes. A 1.5–2 m thick sand lens is encountered within the till at a depth of 4.8 m. Sampling points were installed at depths of 2.5 m, 4 m, and in the sand lens (5.5 m) to monitor the downward migration of a chloride tracer and the organic compounds. Water containing organic compounds and chloride was infiltrated into a 4 m×4.8 m basin at a rate of 8.8 m³ day⁻¹ for 7 days. The mass of naphthalene relative to chloride was 0.39–0.98 for the sampling points located at a depth of 2.5 m, 0.11–0.61 for the sampling points located at a depth of 4 m, and 0–0.02 for the sampling points located in the sand lens. A similar pattern was observed for eight organic compounds for which reliable results were obtained (toluene, phenol, o-cresol, 2,6-, 3,5-dimethylphenol, 1-methylnaphthalene, benzothiophene, and quinoline). This shows that the organic compounds were attenuated during the downward migration through the till despite the high infiltration rate. The attenuation process may be attributed to biodegradation.     

等维新息GM(1,1)模型在TNT生化降解研究中的应用

文中指出了常规GM(1,1)模型的缺点之所在,并对其建模方法作了改进,同时将改进得到的等维新息GM(1,1)模型与常规GM(1,1)模型对白腐菌生化降解TNT废水的过程进行了比较分析,得出改进的等维新息GM(1,1)模型具有更高的预测精度,从而拓宽了GM(1,1)模型在环境科学领域中的应用范围,为环境系统的拟合、预测分析和决策开辟了新的途径。      

Effects of different carbon sources on the removal of ciprofloxacin and pollutants by activated sludge: Mechanism and biodegradation

This research investigated the effects of ciprofloxacin(CIP)(0.5, 5, and 20 mg/L) on SBR systems under different carbon source conditions. Microbial community abundance and structure were determined by quantitative PCR and high-throughput sequencing, respectively.The biodegradation production of CIP and possible degradation mechanism were also studied. Results showed that CIP had adverse effects on the nutrient removal from wastewater.Compared with sodium acetate, glucose could be more effective...