微波诱导催化剂CuO/γ-Al_2O_3处理活性艳蓝的研究

采用均匀包裹沉淀法制得的CuO/γ-Al2O3催化剂,利用XRD对催化剂的物相结构进行了表征,并应用于微波诱导氧化工艺中,考察了催化剂投加量、微波功率、微波辐照时间等因素对活性艳模拟废水处理效果的影响。结果显示,在催化剂投加量为2g/L,微波功率为720W,辐照时间为3min的条件下,处理50mg/L的活性艳蓝脱色率可达到95.3%。     

Evaluating the efficacy of alumina/carbon nanotube hybrid adsorbents in removing Azo Reactive Red 198 and Blue 19 dyes from aqueous solutions

Concerning the high volume of wastewater containing dye in Iran and its adverse effects, it is necessary to develop scientific solutions for treating these wastewaters. The aim of this study was to evaluate the efficiency of the alumina-coated multi-walled carbon nanotubes in removing the Reactive Red 198 (RR 198) and Blue 19 (RB 19) dyes. Synthetic samples including dye with different concentrations were prepared. These samples were put in contact with different contents of alumina/multi-walled carbon nanotubes, in different pH values, in different contact times, different temperatures and the presence of sodium sulfate or sodium carbonate. The optimum pH, dye concentration and temperature for removal of the two dyes was 3, 50 mg l⁻¹ and 25 °C, respectively. The optimum adsorbent dose for removal the RR 198 dye was 0.5 g l⁻¹ and for Blue 19 was 0.4 g l⁻¹. The optimum contact time for RR 198 was 150 min and RB 19 was 180 min. In this condition, maximum removal efficiency for RR 198 and RB 19 was 91.54% and 93.51%, respectively. The adsorption study was analyzed kinetically, and the results revealed that the adsorption fitted a pseudo-second order kinetic model. According to these results alumina/multi-walled carbon nanotubes can effectively remove RR 198 and RB 19 from aqueous solutions.     

漆酶对活性艳蓝染料废水脱色

用白腐真菌漆酶对活性艳蓝X-BR和活性艳蓝K-NR 2种活性染料进行脱色实验。研究了pH、温度、染料浓度和酶活力对脱色率的影响。结果表明,漆酶脱色的适宜条件为:反应温度45℃,pH 6～7,适宜染料浓度为50 mg/L,酶浓度5 U/mL,反应1 h两种染料脱色率可达到75%;通过正交实验确定2种染料的最佳脱色组合分别为:反应温度55℃、pH7、活性艳蓝X-BR浓度50 mg/L、酶浓度5 U/mL和反应温度55℃、pH 6、活性艳蓝K-NR浓度50 mg/L、酶浓度5 U/mL。在所得最优条件下反应1 h,活性艳蓝X-BR和活性艳蓝K-NR的脱色率分别为74.2%和78.6%;反应2 h,脱色率分别为78%和79.5%。     

外负载Ce-TiO_2/活性炭复合体对亚甲基蓝光催化

用超临界流体沉积法处理过的活性炭（AC）为载体,钛酸丁酯为前驱物,硝酸铈为掺杂剂,乙醇为溶剂,制备了外负载TiO2-Ce/Csurf复合材料。在紫外灯照射下,以亚甲基蓝溶液为标准模拟降解物,研究了复合体不同热处理温度、不同浓度、不同亚甲基蓝浓度、不同铈掺杂量以及不同反应温度对光催化性能的影响。结果表明：外负载催化剂的催化性能要高于纯TiO2和体负载催化剂。铈离子掺杂能抑制TiO2晶粒生长,阻碍了TiO2由锐钛矿型向金红石型的转变。当铈离子掺杂量为1.5%,热处理温度为600℃,亚甲基蓝溶液初始浓度为5.5 mg/L,样品浓度为1.5 g/L时,光催化性能最好。     

Decolourization of reactive brilliant blue KN-R by immobilized cells of Aspergillus ficuum

Aspergillus ficuum was immobilized with sodium alginate,and decolourization of Brilliant Blue NK-R was studied on immobilized and free Aspergillus ficuum.The optimal preparation condition of the strain immobilization was obtained by the orthogonal test,it is sodium alginate 3%,CaCl2 5%,wet mycelia 30g/L,calcific time 8h.It was found that the immobilized cells could effectively decolourize Reactive Brilliant Blue KN-R,the optimum temperature and pH were 33℃ and 5.0,respectively.The kinetics study of decolourization of immobilized eclls showed that the decolourization of Aspergillus ficuum immobilized conformed to zero-order reaction model.The decolourization efficiency of immobilized cell compared with that of free cell in different physical conditions.Results showed that the decolourization of immobilized cells with mycelia had the best efficiency.The immobilized cells could be reused after the first decolourization.     

杞麓湖水体藻量和透明度变化分析

近几年监测表明，杞麓湖水体中藻量减少，透明度增加，说明藻量变化对透明度影响极大。藻类繁殖。水体色素增加，透明度降低；藻类死亡，色素分解，水体透明度递增。     

焙烧态镁铝水滑石处理阴离子染料废水研究

采用传统过饱和双滴法合成出Mg/Al为3的碳酸根型水滑石(LDH),经500℃高温煅烧制备出焙烧产物(CLDH),用x-射线、红外光谱和电镜对它们进行了表征。分别考察了焙烧温度、反应时间、pH、投加量、反应温度和初始浓度等因素对焙烧态水滑石吸附酸性铬蓝K模拟废水效果的影响。结果表明,对于100mg/L的铬蓝K溶液,500℃焙烧态水滑石,投加量为0.06g,在pH=3.5左右,室温下反应1h,去除率最高可达98%以上。四次回收重复利用的CLDH对铬蓝K的去除率仍为90%以上,CLDH是一种良好的环保吸附材料。     

Treatment of methylene blue-containing wastewater using microorganisms supported on granular activated carbon under packed column operation

We studied the feasibility of using biological granular activated carbon-packed column in treating methylene blue-containing wastewater. The granular activated carbon with immobilized microbes was packed into a column and fed with 3 liter methylene blue-containing wastewater daily. With initial 1350 mg/l of methylene blue and 1550 mg/l of chemical oxygen demand, it was observed that the colour and chemical oxygen demand removal efficiencies were 99 and 78%, respectively. The high treatment performance of the system could be due to the simultaneous adsorption and biodegradation processes and advantages of immobilized microbes compare to suspended cell system.     

Socioeconomic benefits of conserving Iran’s water resources through modifying agricultural practices and water management strategies

Sustainable development requires modifying the current consumption pattern of natural resources. This study investigates efficient tactics for reducing the unsustainability and inefficiency of human’s food-related blue water consumption alongside improving national environmental and socioeconomic status. As a case study for Iran, 15 alternative management scenarios (AMS) were defined compared to the current on-farm management, and their effects were assessed on a monthly scale. Based on the results, 45.5 billion m³ y⁻¹ (BCM) blue water is consumed within the croplands, 78% and 34% of which are unsustainable and inefficient, respectively. AMCs reduces the unsustainable and inefficient blue water consumption by 2–17 BCM and 2–13 BCM, respectively. The combination of yield gap closure, drip irrigation, soil mulching, and deficit irrigation has the largest effect on blue water saving; it releases or changes the status of monthly blue water scarcity in 11 provinces; increases field-employees by 132%, food security by 9%, international food-export by 87%, and gross domestic production by 54%. However, it doesn’t fully address blue water overconsumption in the summer period; hence, further measures are needed to reduce blue water scarcity to the sustainable level in these environmental hotspots.     

有机胺插层四钛酸对直接湖蓝5B的吸附性能研究

在微波辅助下对四钛酸进行了有机胺插层,获得了正辛胺﹑正十二胺﹑正十六胺插层四钛酸材料,研究了3种层状物质作为吸附剂,pH﹑震荡时间﹑吸附剂用量等因素对直接湖蓝5B偶氮染料吸附的影响,确定了3种材料吸附的最佳条件。研究表明:微波有机胺插层四钛酸材料具有优良的吸附性能,pH=1.0时,正辛胺插层四钛酸用量为0.8 g/L﹑振荡时间40 min,正十二胺插层材料和正十六插层材料用量为0.4 g/L﹑振荡时间分别30 min和50 min时,吸附脱色效果最好。随染料浓度增大,温度升高,插层四钛酸材料会发生板层分离,表现为常规的物理吸附过程。在50℃时,正辛胺﹑正十二胺﹑正十六插层四钛酸对直接湖蓝5B染料的吸附量分别达到636 mg/g﹑3 349 mg/g﹑2 856 mg/g。