基于离散仿真分析的废弃电器电子产品回收网络优化

优化电子废弃物回收网络对控制回收成本、降低环境污染具有重要意义.因此,本文建立了一种综合考虑运输、存储及淡旺季的回收过程离散仿真模型,提出了一种以经济、能源及环境为指标的回收网络评价方法.同时,以安徽省为例,结合现有回收模式,分别设计了4种回收网络布局及运输方案,在不同的回收覆盖率及库存能力条件下以回收成本、燃油消耗及CO2排放为优化目标对比分析各备选方案,提出了在报废量大于0.15万t·a-1的地区建立回收点并采取全局运输模式的最优方案.研究表明,本文提出的方法同样适用于我国其他省市回收网络的优化.     

Hydro-abrasive erosion in hydro turbines: a review

The flow of sediment particles in rivers is a big challenge to develop hydropower plants across the sediment-laden rivers. Hard particles such as quartz and feldspar are available in high amount in the Asian mountain range. The abrasive action of these particles causes the hydro turbines to suffer from erosion in particular at high- and medium-head hydroelectric power plants. This has become a serious economic issue due to maintenance costs and production losses. The treatment without prevention is simply unsustainable. Facilities for sediment exclusion, typically sand traps as well as turbine design, and materials have been improved considerably. In the present paper, studies have been discussed extensively undertaken by several investigators in this field. Based on literature survey several aspects related to reducing the sediment load on turbines, useful ways to improve the turbine surface performance and various erosion models to characterize the effect of erosion on the performance of turbines have been discussed. To calibrate and validate the developed erosion models, more measurements from both physical model tests in laboratories and continuous monitoring of sediment parameters and their impact on the operational hydro turbines are required. As well as the state-of-art in the modeling and simulation using computational fluid dynamics (CFD) has made it possible to optimize the hydraulic design of hydro turbines in order to minimize the erosion level without much sacrifice in the efficiency. To mitigate the hydro-abrasive erosion effects on the performance of turbines, significant improvements have been achieved so far and development is ongoing.     

增大库水位日降幅联合降雨条件下张家祠堂滑坡稳定性分析

库水位下降对滑坡的稳定性变化有重要影响。以张家祠堂滑坡为例,利用Geo-studio软件的Seep/W模块和Slope/W模块分别对滑坡渗流场和稳定性进行数值模拟计算,分析降雨和不同库水位下降速率对该滑坡稳定性的影响规律,并结合滑坡变形的调查情况和数值模拟计算结果对该滑坡进行稳定性预测与评价。结果表明:张家祠堂滑坡为降雨型滑坡,相对于降雨,增大库水位日降幅对滑坡稳定性影响非常有限;预测在非汛期增大库水位日降幅条件下,滑坡整体基本稳定;滑坡在中前部虽有变形,但滑坡整体并未形成连续贯通的软弱面,因此该滑坡目前为基本稳定;滑坡在最危险工况(库水位日降幅1.2m/d+降雨)下的稳定性系数为1.154,滑坡处于基本稳定状态。     

环境实验箱气流组织与围护结构耦合传热研究

目的研究环境实验箱在升、降温过程中气流组织与围护结构的耦合传热行为,为环境实验箱制冷/加热能力的确定提供精确的设计方法。方法首先利用UC240环境实验箱搭建实验平台,测量环境箱送风口速度分布,以及升、降温过程中室内及壁面的温度曲线,然后对环境箱进行建模,以实测的送风速度、温度作为边界条件,利用CFD方法进行仿真,最后对比分析实验值与CFD仿真的结果。结果利用CFD方法计算得到的环境箱升、降温曲线与实测值吻合较好,尤其是壁面温度曲线,误差不超过4℃。送风温度可以根据蒸发器理论或加热功率和回风温度而动态地确定。结论利用CFD方法分析环境实验箱气流组织与围护结构的耦合传热是可行的,FLUENT的UDF功能可根据需要扩展,以协助设计蒸发器和控制策略。     

集成仿真技术在空间光学遥感器设计中的应用

研究空间光学遥感器集成仿真中将光学、机械、热、控制等学科综合考虑的技术,从系统层面考虑各学科对光学性能指标的影响。综述了目前国外比较先进的光学遥感器集成仿真分析方法,主要包括以JWST为代表的STOP学科软件数据交互法和以NGST为代表的DOCS状态空间法,详细阐述了这些方法的集成方法和建模思路。集成仿真技术的实施开展可以减小产品概念设计和方案阶段论证周期,为总体指标的制定提供可靠依据。集成仿真是空间光学遥感器多学科优化的前提,深度集成和子系统协同仿真是未来的发展趋势。     

Numerical evaluation of the effectiveness of NO2 and N2O5 generation during the NO ozonation process

Wet scrubbing combined with ozone oxidation has become a promising technology for simultaneous removal of SO₂ and NO_x in exhaust gas. In this paper, a new 20-species, 76-step detailed kinetic mechanism was proposed between O₃ and NO_x. The concentration of N₂O₅ was measured using an in-situ IR spectrometer. The numerical evaluation results kept good pace with both the public experiment results and our experiment results. Key reaction parameters for the generation of NO₂ and N₂O₅ during the NO ozonation process were investigated by a numerical simulation method. The effect of temperature on producing NO₂ was found to be negligible. To produce NO₂, the optimal residence time was 1.25 sec and the molar ratio of O₃/NO about 1. For the generation of N₂O₅, the residence time should be about 8 sec while the temperature of the exhaust gas should be strictly controlled and the molar ratio of O₃/NO about 1.75. This study provided detailed investigations on the reaction parameters of ozonation of NO_x by a numerical simulation method, and the results obtained should be helpful for the design and optimization of ozone oxidation combined with the wet flue gas desulfurization methods (WFGD) method for the removal of NO_x.     

隔声屏障对街道峡谷污染物扩散的影响

对带有隔声屏障的街道峡谷内流场和污染物浓度场进行了数值模拟,探讨了风速、隔声屏障高度及与建筑物间的距离对流场及污染物扩散的影响。模拟结果显示:街谷内由1个稳定的主涡及街角两侧隔声屏障所在区域的3个附属涡组成。隔声屏障改变了街谷底部的流型,提高了街谷内的x、y方向速度峰值,但在隔声屏障附近区域x方向速度场明显减弱,这也是污染物聚集原因之一。与无隔声屏障相比,隔声屏障的存在物理性阻隔了污染物扩散路径,提高了街道峡谷内污染物浓度峰值,其中行人高度处背风面污染物浓度升高27.51%~28.72%,迎风面污染物浓度升高11.64%~19.99%。街谷内污染物浓度的分布和峰值由风场、隔声屏障高度及与建筑物之间的距离共同决定。     

水下爆破冲击波危害及安全控制措施的模拟分析

水下爆破工程已广泛应用于经济建设的许多领域,但由于水下爆破的特殊性和复杂性,使得人们对水下爆破的危害及控制难以预测.本文采用数值模拟的方法分析了水下爆破冲击波危害及安全控制措施,为水下爆破作业中的安全控制提供了有效的方法.     

S-Zorb装置的事故失效模式及事故后果模拟分析

对S-Zorb装置各单元在运行过程中可能发生的事故模式进行了分析和归纳。针对其中3种典型的事故形态,运用DNV PHAST后果模拟分析软件进行了事故后果模拟和定量计算,结合装置周边人员及设施分布情况,分析事故可能造成的人员伤亡和设备建筑破坏情况。基于事故模式及事故后果模拟结果,提出了安全对策。     

气动热效应对某红外导引头影响分析

导弹高速飞行时所产生的气动热,将影响探测器正常成像质量,从而影响导弹的命中精度和导引头的作用距离.由于新型隔热材料的采用,气动热对导引头性能影响减小很多.采用ANSYS软件对某导弹的气动热效应进行仿真,为高速导弹气动性能分析及其环境失效研究提供参考.