CFD simulation of MSW combustion and SNCR in a commercial incinerator

A CFD scheme was presented for modeling municipal solid waste (MSW) combustion in a moving-grate incinerator, including the in-bed burning of solid wastes, the out-of-bed burnout of gaseous volatiles, and the selective non-catalytic reduction (SNCR) process between urea (CO(NH₂)₂) and NO_x. The in-bed calculations provided 2-D profiles of the gas–solid temperatures and the gas species concentrations along the bed length, which were then used as inlet conditions for the out-of-bed computations. The over-bed simulations provided the profiles of incident radiation heat flux on the top of bed. A 3-dimensional benchmark simulation was conducted with a 750 t/day commercial incinerator using the present coupling scheme incorporating with a reduced SNCR reduction mechanism. Numerical tests were performed to investigate the effects of operating parameters such as injection position, injection speed and the normalized stoichiometric ratio (NSR) on the SNCR performance. The simulation results showed that the distributions of gas velocity, temperature and NO_x concentration were highly non-uniform, which made the injection position one of the most sensitive operating parameters influencing the SNCR performance of moving grate incinerators. The simulation results also showed that multi-layer injections were needed to meet the EU2000 standard, and a NSR 1.5 was suggested as a compromise of a satisfactory NO_x reduction and reasonable NH₃ slip rates. This work provided useful guides to the design and operation of SNCR process in moving-grate incinerators.     

考虑油滴碰撞聚结的斜板除油过程模拟

考虑离散油滴在油田废水除油过程中发生的油滴碰撞聚结现象,模拟得出斜板除油器内全部油滴的动态信息,用于斜板除油器除油效率的计算.对矩形同向流斜板除油过程的模拟研究表明:油滴的碰撞聚结会增加斜板除油的效率;当废水的原始含油浓度增大时,斜板除油的效率会增大,碰撞聚结对除油效率提高的影响也越大;废水流动速度提高及斜板的倾斜角度增加均会使斜板的除油效率降低,但此时油滴碰撞聚结对除油效率的影响仍很明显.     

煤矿火灾烟气流动传播过程仿真研究

煤矿发生火灾后会生成大量有毒气体并产生火风压,烟气在火灾动力的影响下出现状态紊乱,研究煤矿火灾烟气流动传播过程对控制火情有着重要意义。基于国内外研究现状,对燃烧及风流特点进行分析,建立了煤矿火灾烟气流动数学模型,并利用CFD软件进行仿真。研究表明:无通风工况下的烟气为对称流动;随着风速增加,出口处温度降低,烟气向风流入口处的流速减小。     

经口摄入土壤多溴联苯醚生物可给性变化及影响因素的体外消化模拟

误食土壤是污染物(如多溴联苯醚)人体(主要是儿童)暴露的重要途径,人体消化道内污染物吸收的生物可给性是针对此种暴露方式进行定量风险评估的有效途径之一.本研究采用体外消化实验模拟3种不同有机碳含量的天然土壤中典型多溴联苯醚(BDE-28、BDE-47、BDE-99和BDE-153)在胃和小肠消化液中的释放,验证部分消化释放的多溴联苯醚因消化残留固相表面的再吸附造成低估实际生物可给性,并通过不同水土比的拟合计算予以校正.结果表明,校正后的消化率普遍高于校正前;就不同土样而言,BDE-28、BDE-47、BDE-99和BDE-153在不同初始暴露浓度条件下平均提升比例范围分别为14.3%~42.3%、11.1%~32.1%、4.9%~12.3%和0.0%~7.7%.因此,未经校正的消化率会显著低估PBDEs消化道内的生物可给性,尤其是低溴代组分及PBDEs初始浓度较高或高TOC含量的土样.校正后BDE-28、BDE-47、BDE-99和BDE-153的消化率分别维持在21.9%~54.7%、18.8%~43.1%、13.4%~27.2%和9.3%~19.9%.此外,PBDEs的消化率与其辛醇-水分配系数的对数lg KOW呈显著负相关;而与土壤TOC含量及PBDEs初始暴露浓度的相关性并不显著,尤其是高溴代组分.     

多相流中细长颗粒数值模拟研究综述

纤维干燥尾气中的飞灰含有大量的木质纤维、砂光粉和其他粉尘。从形状来看,木质纤维属细长颗粒,和研究较为成熟的球形颗粒在许多方面存在较多差异。目前,国内外学者们已对细长颗粒在多相流中的悬浮、沉降及流化方面开展了大量数值模拟研究,取得了一定的进展;在此基础上,继续完善木质纤维的运动特征、推导出其在换热器表面的碰撞沉积模型是下一步的主要工作。     

HSPF水文水质模型应用研究综述

HSPF(Hydrological Simulation Program-Fortran)模型采用FORTRAN语言编写,以Stanford水文模型为基础,能够综合模拟径流、土壤流失、污染物传输、河道水力等过程,并大量应用于气候变化与土地利用变化的流域水环境效应情景模拟.该模型是半分布式水文水质模型的优秀代表,在国外得到广泛的应用.HSPF模型包括PERLND、IMPLND与RCHRES等3个主要模块,分别实现对透水地段、不透水地段与地表水体的水文水质模拟.总体来看,HSPF模型在国外水文、水质过程模拟,以及涉及气候变化和土地利用影响的情景分析中发挥重要作用,但是国内该模型的应用非常有限.HSPF模型存在的主要问题包括:①模型中某些方案和算法还有改进和完善的空间;②模型对数据输入要求较高,模拟的精度受到空间和属性等数据的限制;③模型只限于均匀混合的河流、水库和一维水体模拟,对于复杂流域或水体的模拟研究,需要与其它模型整合以解决更加综合的问题.目前,针对发展与完善HSPF模型的研究仍在继续,包括模型平台开发、模型功能扩展、模型校正方法研究、参数敏感性研究等方面.随着我国基础数据的积累及共享程度的提高,HSPF模型在我国的应用也将更加广泛.     

3D numerical investigation of thermally assisted high efficiency ductile machining of nanocrystalline hydroxyapatite

This study investigates the effects of four different variables (initial workpiece temperature, side rake angle, edge radius/feed rate, and nose radius/depth of cut) on ductile regime machining of a bioceramic material known as nanohydroxyapatite (nano-HAP) using 3D numerical simulation. AdvantEdge FEM Version 5.9 is used to conduct turning simulations of the nano-HAP workpiece. Tecplot 360 is used to analyze the results of the simulations. Because the workpiece is thin, the entire workpiece is set to a uniform initial temperature to simulate laser preheating of the material. Initial workpiece temperature, rake angle (side rake angle), edge radius, and nose radius are varied, and the effects of these operating conditions on critical feed are investigated. It is found that critical feed increases as initial workpiece temperature increases, and also as negativity of rake angle increases. For the edge radius, it is concluded that an initial increase causes an increase in critical feed – however, at some value of edge radius, critical feed shows no further increase; for the nose radius, critical feed appears to show no significant dependence.     

CE-QUAL-W2模型在上海市大型饮用水水库中的应用

通过二维纵向横向平均水动力学和水质模型（CE-QUAL-W2模型）来模拟上海大型饮用水水库的水质状况。模型初步模拟了该水库中不同深度水层的水质状况,使用2011年1月到2011年11月单月（包含一年四季代表性）的数据对模型主要参数进行校正。结果显示,水质状况的模型计算值与实测值比较接近,与实际情况较吻合,AME和RMS值较好,预测该水库的水质是Ⅰ～Ⅱ类。通过本文对该（CE-QUAL-W2模型）的应用得出的结果显示,该模型也适合模拟一些具有湖泊特性的河流,尤其适用于对水体的水质评估。     

基于人体皮肤热模型的热防护服评价方法研究

在热防护服热防护性能测试装置基础上,用自行研制的新型耐高温模拟皮肤传感器代替铜片热流计测量通过应急热防护服装面料的热流量,将热流量作为热波皮肤模型边界条件,得到人体皮肤表层下80μm处的温度值,从而得到一定条件下人体真实皮肤达到二级烧伤所需时间,用其评价热防护服用织物的热防护性能,并将热波皮肤模型(TWMBT)的测试值与Pennes模型以及铜片热流计的测试结果进行分析比较。采用热波皮肤模型分析织物层下的"皮肤"防热时间更接近实际皮肤达到二级烧伤时间值,可较为精确的量化织物热防护性能,为应急救援热防护服装的热设计提供理论依据。     

深埋岛式地铁车站突发事件时人员疏散模拟研究

在地铁安全性分析中,人员安全疏散是一个关键的考核指标。笔者首先介绍基于规范的人员疏散设计、基于火灾工程学的性能化人员疏散设计思路及计算方法;以某市轨道交通S号线深埋车站为系统原型,通过人员疏散动力学模型对深埋车站的人员疏散过程(1 200人)进行计算机模拟;研究突发事件时,深埋站点内人员能否安全疏散。