Enhancing nitrogen removal from low carbon to nitrogen ratio wastewater by using a novel sequencing batch biofilm reactor

Removing nitrogen from wastewater with low chemical oxygen demand/total nitrogen (COD/TN) ratio is a difficult task due to the insufficient carbon source available for denitrification. Therefore, in the present work, a novel sequencing batch biofilm reactor (NSBBR) was developed to enhance the nitrogen removal from wastewater with low COD/TN ratio. The NSBBR was divided into two units separated by a vertical clapboard. Alternate feeding and aeration was performed in the two units, which created an anoxic unit with rich substrate content and an aeration unit deficient in substrate simultaneously. Therefore, the utilization of the influent carbon source for denitrification was increased, leading to higher TN removal compared to conventional SBBR (CSBBR) operation. The results show that the CSBBR removed up to 76.8%, 44.5% and 10.4% of TN, respectively, at three tested COD/TN ratios (9.0, 4.8 and 2.5). In contrast, the TN removal of the NSBBR could reach 81.9%, 60.5% and 26.6%, respectively, at the corresponding COD/TN ratios. Therefore, better TN removal performance could be achieved in the NSBBR, especially at low COD/TN ratios (4.8 and 2.5). Furthermore, it is easy to upgrade a CSBBR into an NSBBR in practice.     

Spatial distribution of lindane in topsoil of Northern France

Lindane is a persistent organochlorine insecticide and the use of this insecticide in agriculture was banned in France in 1998. In this study we investigated the concentrations of lindane in topsoil in Northern France and used robust geostatistics to map the geographical distribution of lindane. The study was based on a 16 km × 16 km grid covering an area of ca 25 000 km². Lindane was found in all soils, even those from non-agricultural-application areas. Very low ratios of α-/γ-HCH and δ-/γ-HCH suggested that a long time had passed since technical HCH was used in the studied area, or that emission sources of lindane were still present. A strong gradient in lindane concentration was observed, with the highest lindane concentrations in an area located in the northern region. Results suggested that some of the lindane observed in the high concentration area may have come from volatilization of old lindane applied to intensively cultivated areas, which was then transported by prevailing winds coming from the south-west and deposited in a densely inhabited depression.     

原位柱撑改性膨润土在微污染饮用水除磷中的应用研究

利用Al3+离子较易水解聚合的性质,微波辅助合成了keggin Al₁₃原位柱撑改性膨润土(PMCs),并探究了其对微污染饮用水中磷元素的去除作用,研究表明,PMCs对磷的混凝和去除作用优于原土、工业 PAC和传统的柱撑改性膨润土(CPMCs);影响除磷效果的主要因素有：搅拌时间、搅拌速度、水样的pH值以及初始浓度等,其最佳除磷条件是：在500 mL 10 mg/L含磷水样中加入1.5 g改性膨润土,搅拌速度为180 r/min,搅拌时间为5 h,水样pH为6～8。     

Geospatial Analysis of Climatic and Geomorphic Interactions Influencing Stream Discharge, Appalachian Mountains, USA

Streamflow values are commonly synthesized for locations where flow measurement stations are lacking or where only intermittent measurements are available. In an Appalachian Mountains dataset comprised of 29 watersheds, the most appropriate among geomorphic, geologic, and hydrogeologic datasets were selected for use in prediction of streamflow at watershed scale. A statistical model was developed using principal components analysis (PCA) and cluster analysis (CA) for. Using CA on variables derived from the PCA, an optimum set of variables was derived for predicting streamflow. Results indicate there are two categories of watersheds in the study area. The first is strongly correlated with climatic variables (precipitation, temperature, elevation, and groundwater recharge). The second is strongly correlated with two geomorphic variables (watershed slope and percentage of forested area). The spatial distribution of cluster classifications shows that watersheds dominated by the climatic component are located along the Allegheny Front while watersheds dominated by the geomorphic component are located in the Allegheny Plateau and Valley and Ridge physiographic provinces. These variations between the Allegheny Plateau and Valley and Ridge physiographic provinces suggest that, to accurately model streamflow, modeling needs be done based on natural physiographic boundaries rather than political boundaries. In this physiographic setting, elevation seems to be a major control.     

Evaluation of residue risk and toxicity of different treatments with diazinon insecticide applied to mushroom crops

ABSTRACT

This work describes the phytotoxic effect of different doses of diazinon and different application times on Agaricus bisporus mycelium, and determines the residue levels in mushrooms from the first three flushes. Mushroom cultivation is a widespread commercial activity throughout the world. The application of insecticide diazinon to the compost or casing layer is a common practice to control two mushroom pests, the phorid Megaselia halterata and the sciarid Lycoriella auripila. Application to the compost does not result in any appreciable fall in yield or quality, and does not delay the harvest time. In contrast, application to the casing led to a slight fall (6.2%) in production and a smaller number of mushrooms although they are larger in size. Residue levels of more than 0.01 ppm are detected in many of the samples analyzed, and raising the question whether the product should continue to be used in mushroom cultivation in the conditions in which it is currently applied.     

A numerical model for transient-hysteretic flow and solute transport in unsaturated porous media

A two-dimensional flow and transport model was developed for simulating transient water flow and nonreactive solute transport in heterogeneous, unsaturated porous media containing air and water. The model is composed of a unique combination of robust and accurate numerical algorithms for solving the Richards', Darcy flux, and advection-dispersion equations. The mixed form of Richards' equation is solved using a finite-element formulation and a modified Picard iteration scheme. Mass lumping is employed to improve solution convergence and stability behavior. The flow algorithm accounts for hysteresis in the pressure head-water content relationship. Darcy fluxes are approximated with a Galerkin and Petrov-Galerkin finite-element method developed for random heterogeneous porous media. The transport equation is solved using an Eulerian-Lagrangian method. A multi-step, fourth-order Runge-Kutta, reverse particle tracking technique and a quadratic-linear interpolation scheme are shown to be superior for determining the advective concentration. A Galerkin finite-element method is used for approximating the dispersive flux. The unsaturated flow and transport model was applied to a variety of rigorous problems and was found to produce accurate, mass-conserving solutions when compared to analytical solutions and published numerical results.     

Direct and indirect methods for chromium identification in industrial wastes

The examinations of selected wastes and stream sediments from the vicinity of a chemical plant by sequential extraction procedures and direct methods, SEM/EDX and XRD, were carried out in order to identify the different forms of chromium, particularly as they are released to potential mobility. The results show that the top and bottom waste samples contain 37,756 and 53,650 μg g¹ Cr, respectively, but about 7% and 2% of the total chromium type Cr(VI). The chemical extraction results show that the mobility of Cr in the upper part of the waste pile is significantly higher than in the bottom section; the exchangeable form of Cr accounts for 25% and < 1%, respectively, the last one irrespective of redox conditions. About 50% of Cr is associated with the reducible fraction of the top waste, and similar with the residual fraction in the bottom waste. Oxidation of the bottom waste shift some portion of Cr from residual to the moderately reducible fraction. The major Cr-forms in the river sediments are compounded with Fe-oxides. The < 2 μm size fraction of the selected sediment sample, particular enriched in chromium contained up to 73,000 μg g¹ Cr with about 95% of this in the moderately reducible fraction, predominantly bound with oxyhydroxides. SEM/EDX and XRD analysis of wastes and river sediment indicate that the main insoluble Cr-phase is ferroan — (Mg, Fe) (Cr, Al)²O⁴ which would be dissolved mainly in the residual fraction.     

由维尼纶厂废液合成乙酸乙酯

本文以维尼纶厂废液中提取的乙醛为原料,通过缩合反应合成乙酸乙酯,乙醛转化率达91.5%,选择性达93.0%,并对乙醛的提取、催化剂合成及缩合反应进行了探讨.