药物合成废水处理工程

针对氯唑沙宗、枸橼酸莫沙必利化学原料药合成过程中产生的有机废水浓度高、成分复杂及处理难度大等特点(COD高达80000mg/L左右),采用催化氧化-生物化学方法,试验研究了药物合成废水处理。试验结果表明,该技术对合成废水的COD去除率可达98%,SS去除率可达96%,色度降到50倍左右,其去除率约为98%。该系统运行费用为0.4~0·5元/m3废水。经过3个月的工程运行,表明催化氧化-生物化学处理药物合成废水系统是一种高效率、低能耗、运行管理方便、经济可行的处理方法。处理类似制药废水这样的高浓度有机废液,上述废水处理工艺具有广阔的应用前景。     

原位合成CuO/ZnO-Al2O3水滑石衍生催化剂催化湿式空气氧化苯酚

采用原位合成法在γ-Al_2O_3表面合成了锌铝水滑石,再采用浸渍法制备了CuO/ZnO-Al_2O_3水滑石衍生催化材料,并将其应用于催化湿式空气氧化苯酚.同时,采用XRD、SEM、BET、H_2-TPR和N_2O滴定等手段对催化剂进行了表征,探讨了CuO含量对CuO/ZnO-Al_2O_3催化剂催化性能的影响.结果表明,当CuO负载量为10%时,催化剂的Cu比表面积最大,催化性能最佳,在200℃、2 MPa空气、苯酚初始浓度500 mg·L~(-1)的条件下,COD去除率为95.3%.     

Removal of veterinary antibiotics from anaerobically digested swine wastewater using an intermittently aerated sequencing batch reactor

A lab-scale intermittently aerated sequencing batch reactor(IASBR)was applied to treat anaerobically digested swine wastewater(ADSW)to explore the removal characteristics of veterinary antibiotics.The removal rates of 11 veterinary antibiotics in the reactor were investigated under different chemical organic demand(COD)volumetric loadings,solid retention times(SRT)and ratios of COD to total nitrogen(TN)or COD/TN.Both sludge sorption and biodegradation were found to be the major contributors to the removal of veterinary antibiotics.Mass balance analysis revealed that greater than 60%of antibiotics in the influent were biodegraded in the IASBR,whereas averagely 24%were adsorbed by sludge under the condition that sludge sorption gradually reached its equilibrium.Results showed that the removal of antibiotics was greatly influenced by chemical oxygen demand(COD)volumetric loadings,which could achieve up to 85.1%±1.4%at 0.17±0.041 kg COD/m-3/day,while dropped to 75.9%±1.3%and 49.3%±12.1%when COD volumetric loading increased to 0.65±0.032 and1.07±0.073 kg COD/m-3/day,respectively.Tetracyclines,the dominant antibiotics in ADSW,were removed by 87.9%in total at the lowest COD loading,of which 30.4%were contributed by sludge sorption and 57.5%by biodegradation,respectively.In contrast,sulfonamides were removed about 96.2%,almost by biodegradation.Long SRT seemed to have little obvious impact on antibiotics removal,while a shorter SRT of 30–40 day could reduce the accumulated amount of antibiotics and the balanced antibiotics sorption capacity of sludge.Influent COD/TN ratio was found not a key impact factor for veterinary antibiotics removal in this work.     

Characteristics and formation mechanism of regional haze episodes in the Pearl River Delta of China

To investigate the characteristics and the specific mechanism of continuous haze,comprehensive measurements were conducted from 15 October to 19 November in the Atmospheric Environment Monitoring Super-Station in Heshan of Guangdong province.Five haze episodes occurred in October and November 2014 in the Pearl River Delta(PRD)region. The meteorological parameters, gas data, chemical compositions, and optical parameters of the aerosols were obtained. Among these events, the second haze episode,with the highest concentration of PM2.5 of 187.51 μg/m~3, was the most severe. NO~3-was always higher than SO_4~(2-), which indicated that motor vehicles played an important role in the haze, even though the oxidation rate from SO_2 to SO_4~(2-)was faster than that of NOXto NO_3~-. The difference between the hourly averages of Na+and K+during the haze episode and clean days was small, implying that straw combustion and sea salt had no significant effect on the occurrence of haze, and the backward trajectories of the air masses also conformed with this result. The air pollutants were difficult to disperse because of the significant decrease in the planetary boundary layer(PBL) height. Relative humidity played a crucial role in the formation of haze by leading to hygroscopic growth of the diameter of aerosols.     

Chemical composition of fine particles from incense burning in a large environmental chamber

 This study is aimed to characterize the major chemical compositions of PM_2.5 from incense burning in a large environmental chamber. Chemical analyses, including X-ray fluorescence for elemental species, ion chromatography for water soluble inorganic species (chloride, nitrate, sulfate, sodium, potassium, ammonium) and thermal/optical reflectance analysis for carbon species were carried out for combustion of three incense categories (traditional, aromatic and church incense). The average concentrations from incense burning ranged from 139.8 to 4414.7 μg m⁻³ for organic carbon (OC), and from 22.8 to 74.0 μg m⁻³ for elemental carbon (EC), respectively. The average OC and EC concentrations in PM_2.5 of three incense categories were in the order of church incense>traditional incense>aromatic incense. OC/EC ratios ranged from 7.0 to 39.1 for the traditional incense, with an average of 21.7; from 3.2 to 11.9 for the aromatic incense, with an average of 7.7. The concentrations of Cl⁻, SO₄²⁻, Na⁺ and K⁺ were highly variable. On average, the inorganic ion concentration sequence was traditional incense>church incense>aromatic incense. The profiles for elements were dominated by Na, Cl and K. In general, the major components in PM_2.5 fraction from incense burning are OC (especially OC2, OC3 and OC4), EC and K.     

Contribution of motor vehicle emissions to organic carbon and fine particle mass in Pittsburgh, Pennsylvania: Effects of varying source profiles and seasonal trends in ambient marker concentrations

We present estimates of the vehicular contribution to ambient organic carbon (OC) and fine particle mass (PM) in Pittsburgh, PA using the chemical mass balance (CMB) model and a large dataset of ambient molecular marker concentrations. Source profiles for CMB analysis are selected using a method of comparing the ambient ratios of marker species with published profiles for gasoline and diesel vehicle emissions. The ambient wintertime data cluster on a hopanes/EC ratio–ratio plot, and therefore can be explained by a large number of different source profile combinations. In contrast, the widely varying summer ambient ratios can be explained by a more limited number of source profile combinations. We present results for a number of different CMB scenarios, all of which perform well on the different statistical tests used to establish the quality of a CMB solution. The results illustrate how CMB estimates depend critically on the marker-to-OC and marker-to-PM ratios of the source profiles. The vehicular contribution in the winter is bounded between 13% and 20% of the ambient OC (274±56–416±72 ng-C m⁻³). However, variability in the diesel profiles creates uncertainty in the gasoline–diesel split. On an OC basis, one set of scenarios suggests gasoline dominance, while a second set indicates a more even split. On a PM basis, all solutions indicate a diesel-dominated split. The summer CMB solutions do not present a consistent picture given the seasonal shift and wide variation in the ambient hopanes-to-EC ratios relative to the source profiles. If one set of source profiles is applied to the entire dataset, gasoline vehicles dominate vehicular OC in the winter but diesel dominates in the summer. The seasonal pattern in the ambient hopanes-to-EC ratios may be caused by photochemical decay of hopanes in the summer or by seasonal changes in vehicle emission profiles.     

Rates of environmental problem generation: Thoughts on a new research direction

Environmental scientists are continually discovering new and emerging environmental problems. There have been many studies of how a particular environmental problem has occurred, its costs to society, and its (potential) resolution. However, to date there have been few studies of the rate at which new environmental problems are generated by human technological innovations. In this note, I present a conceptual framework that will help quantify how many now-unknown problems we may expect to occur in a given sector. Two brief case studies illustrate the difficulty of finding appropriate dataset for fitting the full model, however. Policy implications of the conceptual framework are discussed, with different kinds of economic sectors requiring different approaches.     

煤矿内因火灾事故的2级模糊综合评判

采用2级模糊综合评判的方法对煤矿的内因火灾进行评价.首先建立煤矿内因火灾危险性评价指标体系;采用集值统计法确定评价指标权重,用加权平均模型确定内因火灾危险性总的相对隶属度,求出模糊特征向量;最后得出内因火灾危险性等级.     

Perspectives on corporate social responsibility in the chemical sector: A comparative analysis of the Mexican and South African cases

In recent years, the debate on corporate responsibility has shifted from a focus on environmental management towards a broader concept of corporate social responsibility (CSR). This article examines the chemical industry's approach to CSR from the perspective of two emerging economies: Mexico and South Africa. The global chemical industry was one of the first to respond to public concerns about environmental pollution, toxic waste and human health by adopting an industry‐wide code of practice, known as Responsible Care. This article examines the extent to which the chemical industry has responded to the broader debate on CSR. On the basis of a comparative case study, this article argues that the response to social issues by Mexican and South African chemical companies has tended to be limited to the ‘community awareness and emergency response’ (CAER) or community dialogue component of the international voluntary management framework, Responsible Care. Similarities and differences in regulatory and institutional conditions, as well as different levels of civil society engagement, reveal additional limitations for CSR, beyond that of the Responsible Care framework. This article argues that the socio‐political context influences the extent to which companies embrace CSR, especially in emerging economies, and highlights several challenges for the chemical industry in moving forward on CSR: credibility, stakeholder engagement, value‐chain accountability, disclosure and transparency. Reflecting on these challenges, the authors conclude by recommending a renewed focus on: (1) developing a broader set of CSR management practices beyond Responsible Care; (2) institutionalizing stronger accountability measures, such as reporting and verification; and (3) developing multi‐stakeholder partnerships that complement regulation and build public sector regulatory and guidance capacity.     

APPLICATION OF THE HEC-4 MONTHLY STREAM FLOW SIMULATION MODEL1

ABSTRACT: The HEC-4 monthly stream flow simulation model, developed by the Hydrologic Engineering Center, Davis, California, is used to extend the available historical stream flow records in the Central Ohio area. The principal objective of this paper is to examine the effectiveness of the HEC-4 model in generating synthetic monthly flows. Important statistical parameters are evaluated in order to relate the statistical properties of the historical and generated flows. In doing so, it is observed that the mean, standard deviation, and skewness of the generated flows are consistently larger than the corresponding estimates based on historical flows. However, results show that these statistics, as well as the lag-1 serial correlation, are generally well maintained by the generated sequences. The degree to which any statistical dissimilarities would be critical, from an engineering design point of view, is demonstrated by utilizing their low flow characteristics. Estimates of reservoir safe-yields, based on a nonsequential mass-curve analysis of the historical and generated low flows, indicate a nominal difference in this particular study.