Spectrum characteristics analysis of microseismic signals transmitting between coal bedding

This study was performed to investigate the propagation law of microseismic signals transmitting along the direction parallel and vertical to the bedding in the process of coal rock rupture under uniaxial compression. Microseismic signals during the whole process of coal-rock deformation fracture until burst failure was tested by using the coal rock rupture microseismic experimental system. The empirical mode decomposition graphic, Hilbert spectrum and time-frequency spectrum were obtained by using Hilbert-Huang Transform or HHT. Also the microseismic signals transmitting along the direction parallel and vertical to the bedding in the process of coal rock rupture were spectrum comparative analyzed with EMD analysis method. Results show that amplitude and velocity of microseismic signals changed very small along the parallel direction to bedding in the process of propagation, but microseismic signals delayed and amplitude weakened obviously along the vertical direction to bedding. Signal delay and signal attenuation were confirmed that bedding impact on microseismic wave transmitting.     

Mechanism research on coal and gas outburst during vibration blasting

The coal and gas outburst results from plenty of factors, while vibration is the most important factor among them. Therefore, the influences of vibration acting on gas desorption and coal structure had been conducted. And the mechanism of coal and gas outburst induced by vibration was illustrated through examples. The results showed that the gas desorption accelerates under the action of vibration, and then the gas gradient increases. Meanwhile, vibration would increase and expand fractures in the internal coal body, which aggravates the risk of coal and gas outburst greatly. In conclusion, vibration is a more important factor attributable to coal and gas outburst compared with other coal mining method, mining technology and construction method.     

Experimental study on oxygen consumption rate of residual coal in goaf

In order to research the actual oxygen consumption rate of residual coal in goaf, the heating and oxidizing experiment was conducted respectively on five types of single particle size of coal samples and one hybrid particle size of coal samples by using self-developed CSC-B2 test system. This study measured inlet and outlet oxygen concentration of the oxidation tank, and calculated the oxygen consumption rate of each coal sample at different temperatures. For the residual coal in the same goaf, which is regarded as a hybrid particle size of coal consisting of a variety of single granularity of coal, its oxygen consumption rate is the mass weighted average of the rate of each particle size of coal. Accordingly, this paper established the equation of oxygen consumption rate of hybrid particle size of coal samples, taking into account temperature, granularity and oxygen concentration. Then comparison between the calculated value and the actually measured value of oxygen consumption rate of hybrid particle size of coal samples at different temperatures was conducted. And the results reveal that the calculated value basically coincide with the actually measured one. Moreover, the results prove that the established calculation formula for oxygen consumption rate can be used to accurately calculate the actual oxygen consumption rate of residual coal samples. The achievement of this research is of theoretical and practical significance for learning about the characteristics of coal spontaneous combustion and forecasting the self-ignition of residual coal in goaf.     

Simulation analysis on structure safety of coal mine mobile refuge chamber under explosion load

In order to check structural strength of coal mine mobiles refuge chamber, and do security evaluation of the mobile refuge chamber, a refuge chamber model was established, then a finite element method was instituted for it to ensure the refuge chamber would not be severely damaged when gas or coal dust explosion suddenly happened. A triangle shock wave with 1.2 MPa over-pressure, 300 ms lasting time was settled. Explicit nonlinear dynamic analysis program was used to simulate response of the refuge chamber. The maximum stress was 244 MPa, located in central part of sides and tail end of the last capsule. The maximum displacement was 29.32 mm, located in central part of sides and tail end of the last capsule. The calculation indicated that the refuge chamber was not obviously damaged. It could reliable work to meet safety requirements. Compared with the reported experimental results, the simulation method was verified. Based on analysis, suggestions were put forward for further improving.     

西部开发中的煤矿区生态环境保护与重建问题

分析了西部尤其是西北地区煤矿区生态环境坡坏的现状，确定了矿区重庆重建工程的目标，提出了矿区生态环境保护与重建的具体措施。     

Flame propagation in hybrid mixture of coal dust and methane

To investigate the flame propagation through hybrid mixture of coal dust and methane in a combustion chamber, a high-speed video camera with a microscopic lens and a Schlieren optical system were used to record the flame propagation process and to obtain the direct light emission photographs. Flame temperature was detected by a fine thermocouple. The suspended coal dust in the mixture of methane and air was ignited by an electric spark. The flame propagation speeds and maximum flame temperatures of the mixture were analyzed. The results show that the co-presence of coal dust and methane improves the flame propagation speed and maximum flame temperature notably, which become much higher than that of the single-coal dust flame. The flame front temperature varies with the coal dust concentration.     

Effect of CaO on retention of S, Cl, Br, As, Mn, V, Cr, Ni, Cu, Zn, W and Pb in bottom ashes from fluidized-bed coal combustion power station

This work was conducted to evaluate whether Ca-bearing additives used during coal combustion can also help with the retention of some other elements. This work was focused on the evaluation of bottom ashes collected during four full-scale combustion tests at an operating thermal fluidized-bed power station. Bottom ashes were preferred to fly ashes for the study to avoid interference from condensation processes usually occurring in the post-combustion zone. This work focused on the behaviors of S, Cl, Br, As, Mn, V, Cr, Ni, Cu,Zn, W, and Pb. Strong positive correlations with CaO content in bottom ashes were observed（for all four combustion tests） for S, As, Cl and Br（R = 0.917-0.999）. Strong inverse proportionality was calculated between the contents of Pb, Zn, Ni, Cr and Mn and CaO, so these elements showed association to materials other than Ca-bearing compounds（e.g., to aluminosilicates, organic matter, etc.）. Somewhat unclear behaviors were observed for W, Cu, and V. Their correlation coefficients were evaluated as statistically ＂not significant＂, i.e., these elements were not thought to be significantly associated with CaO. It was also discovered that major enrichment of CaO in the finest bottom ash fractions could be advantageously used for simple separation of elements strongly associated with these fractions, mainly S and As, but also Cl or Br. Removal of5% of the finest ash particles brings about a decrease in As concentration down to 77%-80% of its original bulk ash content, which can be conveniently used e.g., when high As content complicates further ash utilization.     

沈阳市煤炭利用现状及燃煤污染控制对策与措施分析

针对沈阳市煤炭消费总量、结构及燃煤锅炉污染控制设施目前所存在的主要问题,提出了不同吨位燃煤锅炉的污染控制对策与措施。     

煤炭工业矿井水净化处理问题与可持续发展

本文对国内煤炭工业矿井水净化处理技术的现状和存在的主要问题进行了阐述。重点介绍了鹤岗市煤矿矿井水处理净化后作为饮用水的技术工艺流程及其特点,通过进行效益分析,认为该矿井水净化处理技术具有一定的推广应用前景,从而实现可持续发展。     

煤焦化生产过程甲烷排放初步研究

本研究选取山西省具有代表性的焦化厂,通过在废气排放烟囱上采集燃烧室废气和装煤/出焦废气,初步研究了煤焦化过程甲烷排放特征。结果显示燃烧室废气中CH4占∑(CH4+NMHC)的比例远高于装煤和出焦废气。基于EPA AP-42排放因子的计算方法,煤焦化三个工段的CH4排放因子为228.5±56.1g/t。结合中国机械炼焦炉焦炭产量,2004年中国机械炼焦CH4排放为0.03Tg/a,占中国总CH4排放的0.1%,可能是山西省除煤炭开采外的重要甲烷排放源,该值还需再进一步的工作中完善和验证。