Experimental study on the influence mechanism of gas seepage on coal and gas outburst disaster

By using the self-developed triaxial servo-controlled seepage equipment for thermo-fluid-solid coupling of coal containing gas and the self-developed coal and gas outburst simulation test device, experiments to study the influence mechanism of gas seepage on coal and gas outburst disasters. The results show that: (i) gas seepage decreases the strength of coal containing gas and accelerates its failure process; (ii) under the same gas pressure, the confining pressure is larger, the more difficult the gas flows and the greater the intensity of coal containing gas is; (iii) in the process of coal and gas outburst, the greater the vertical ground stress is, the more powerful the outburst will be; (iv) the influence mechanism of gas seepage on coal and gas outburst disasters is as follows: firstly, gas seepage weakens the mechanical properties of coal body, which makes it much easier for coal and gas outburst to occur; secondly, on the same effect of external force, it will be easy to form a high gas pressure zone in the coal body under the difficult condition of gas seepage, and accumulate more gas compression energy, which is the energy source for coal and gas outburst, and it is also the main dynamic source to throw and grind the coal.     

Experimental research into effects of obstacle on methane-coal dust hybrid explosion

An experimental system including pressure transducer, data acquisition card, computer and electric spark ignition device was set up to research methane-coal dust hybrid explosions in closed tubes with different types of obstacles inside. Its dynamic response time was less than a millisecond and the test precision was 0.1%. The experimental results show that the obstacles had great effects on the explosion characteristics in the tube. Hollow obstacles linked with inner wall of the tube induced faster pressure rising than installed center blocked solid obstacles. Obstacles with more sharp corner induce more violent explosions. The most dangerous explosion occurred when spacing between obstacles almost equaled the inner diameter of the tube for the same size obstacle.     

Collecting representative dust samples: A comparison of various sampling methods in underground coal mines

Former methods used in the U.S. to assess hazardous and explosible coal dust date back to the 1950s. As mining technologies advanced, so too have the hazards. Given the results of the recent coal dust particle size survey and full-scale experimental mine explosion tests, the National Institute for Occupational Safety and Health (NIOSH) recommended a new minimum standard, in the absence of background methane, of 80% total incombustible content (TIC) be required in the intake airways of bituminous coal mines, replacing the previous 65% TIC requirement. Most important to monitoring and maintaining the 80% TIC is the ability to effectively collect and analyze representative dust samples that would likely disperse and participate in dust explosion propagation. Research has shown that dust suspended on elevated surfaces is usually finer, more reactive, and more readily dispersible while floor deposits of dust are generally coarser and more difficult to disperse given the same blast of air. The roof, rib, and floor portions of the dust samples were collected and analyzed for incombustible content separately and the results were compared to a band sample of the roof, rib, and floor components. Results indicate that the roof and rib dust samples should be kept separate from floor dust samples and considered individually for analyses. The various experimental collection methods are detailed along with preferred sampling approaches that improve the detectability of potentially hazardous accumulations of explosible dust.     

Sources of underground CO: Crushing and ambient temperature oxidation of coal

As a harmful gas in underground coal mine, CO seriously threatened the safety of miners. Currently, the spontaneous combustion of residual coal in goaf is generally considered as the main source of underground CO. CO gas is also widely used as an indicator gas in fire prediction in mines. However, high concentrations of CO are also detected in some mines without spontaneous combustion of coal. Therefore, in the paper, with four ranks of coal, we studied other two potential CO sources: crushing and oxidation at ambient temperature. The more completely crushed coal produces more CO. The concentration of generated CO is inversely proportional to moisture content in coal. Therefore, the addition of water can inhibit the generation process of CO during the crushing process of coal. Lignite with low metamorphic grade can be oxidized to produce CO at ambient temperature (25 °C), and anthracite with high coal rank can be only oxidized to produce CO at 60 °C. Infrared spectra indicated that the coal with rich aliphatic hydrocarbons and oxygen-containing functional groups are more susceptible to oxidation at room temperature. Moreover, the smaller particle size of coal is more beneficial to the oxidation at ambient temperature to generate CO. CO generation during coal oxidation is also closely related to the ventilation rate.     

锅炉温控炉拱的设计及燃烧技术性能

论述了将小型链条炉排工业锅炉的炉拱设计成在运行中可以全量调节的结构,以适应燃用多种煤种的需要,并减少与固定拱操作有关的意外伤亡事故。这项技术有创新性,适用性和推广价值     

煤层注水降低综采工作面煤尘浓度的研究

在深入研究官地矿９＃ 煤渗透特性的基础上,提出动压预注水的煤层注水方案与参数,并在官地矿进行了工业性试验,取得了降低综采工作面煤尘浓度６０％ 以上的明显效果。它对我国煤矿有效实施煤层注水、降低工作面粉尘浓度具有实际指导意义     

粉煤灰改性吸附材料处理沥青烟气

分析了粉煤灰改性后的物质基础 ,采用吸附法 ,利用改性粉煤灰作为吸附剂对沥青烟气进行处理 ,通过实验研究得到一定的运行参数 ,为沥青烟气的处理提供了理论依据     

煤渣填料固定化菌膜处理餐厅污水

以煤渣为填料,采用人工筛选优势菌挂膜固定化技术和直流式供水送风形式,对酒家、宾馆的餐厅污水进行生物接触氧化处理,COD和BOD的去除率可>90％,处理后排放水质可稳定达到COD≤100mg·1~(-1),BOD≤30mg·1~(-1),SS≤30mg·1~(-1),NH_3—N≤15mg·1~(-1)。推广应用结果表明,具有显著的经济效益和环境效益。     

Emissions from RDF/coal blended fuel combustion

The significant volume and weight reduction along with the energy potential of MSW, in the form of refuse derived fuel (RDF), has made its incineration an attractive alternative. However, the gaseous emissions such as, CO₂, CO, NO_x and SO₂, which are the byproduct of the combustion process pose serious environmental problems. These problems are compounded by the presence of certain highly regulated hazardous wastes such as, dioxins and furans in the exhaust stream. In the present investigation, different compositions of RDF/Coal blends were examined and the gaseous emissions from the combustion of the briquetted fuel were measured. Also, a direct comparison of emissions from RDF/coal blend incineration with coal combustion is presented in this paper. The potential for recovery of ferrous and non- ferrous metals provides an additional economic motivation for the use of RDF/Coal blended briquettes.     

不同粒度飞灰中16种微量元素的含量分布

研究了不同粒级的燃煤飞灰中的Ｂａ、Ｂｅ、Ｃｄ、Ｃｒ、Ｃｕ、Ｈｇ、Ｌｉ、Ｍｎ、Ｎｉ、Ｐｂ、Ｓｒ、Ｔｉ、Ｖ、Ｚｎ、Ｚｒ元素的含量分布,煤中元素的含量比及富集因子。