One-step preparation of a novel graphitic biochar/Cu0/Fe3O4 composite using CO2-ambiance pyrolysis to activate peroxydisulfate for dye degradation

Herein,a one-step co-pyrolysis protocol was adopted for the first time to prepare a novel pyrogenic carbon-Cu⁰/Fe₃O₄ heteroatoms (FCBC) in CO₂ ambiance to discern the roles of each component in PDS activation.During co-pyrolysis,CO₂ catalyzed formation of reducing gases by biomass which facilitated reductive transformation of Fe³⁺ and Cu²⁺ to Cu⁰ and Fe₃O₄,respectively.According to the a...     

Component regulation in novel La-Co-O-C composite catalyst for boosted redox reactions and enhanced thermal stability in methane combustion

A novel La-Co-O-C (LC-C) composites were prepared via a facile co-hydrothermal route with oxides and glycerol and further optimized for methane catalytic activity and thermal stability via component regulation. It was demonstrated that Co₃O₄ phase was the main component in regulation. The combined results of X-ray photoelectron spectroscopy (XPS), temperature-programmed desorption of oxygen (O₂-TPD), temperature-programmed reduction of hydrogen (H₂-TPR), temperature-programmed desorption of ammonia/carbon dioxide (NH₃/CO₂-TPD) revealed that component regulation led to more oxygen vacancies and exposure of surface Co²⁺, lower surface basicity and optimized acidity, which were beneficial for adsorption of active oxygen species and activation of methane molecules, resulting in the excellent catalytic oxidation performance. Especially, the (3.5)LC-C (3.5 is Co-to-La molar ratio) showed the optimum activity and the T₅₀ and T₉₀ (the temperature at which the CH₄ conversion rate was 50% and 90%, respectively) were 318 and 367°C, respectively. Using theoretical calculations and in situ diffuse reflection infrared Fourier transform spectroscopy characterization, it was also found that the catalytic mechanism changes from the “Rideal-Eley” mechanism to the “Two-term” mechanism depending on the temperature windows in which the reaction takes place. Besides, the use of the “Flynn-Wall-Ozawa” model in thermoanalytical kinetics revealed that component regulation simultaneously optimized the decomposition activation energy, further expanding the application scope of carbon-containing composites.     

顺城地区地表水污染防治对策

通过对顺城河北地区地表水环境现状特点及其污染状况的调查详细分析了各支流的纳污量,了解河北地区各支流对浑河主河道的“污染贡献”,运用科学的方法确定各功能水质目标,提出水污染总量、控制削减方案和治理方案。     

亚甲基蓝比色法测定大气中的硫化氢

用亚甲基蓝比色法测定分析大气中的硫化氢气体,方法灵敏、吸收效果好、稳定性和避光作用较为理想.适用于测定大气中的硫化氢气体.     

淮南市采煤塌陷区水域的有机物污染研究

通过对淮南市采煤塌陷区水域理化指标和叶绿素的测定。用较为简单的W分级法对9个监测点的水质进行评分分级,并对塌陷区水域营养化程度进行了评级,用以反映采煤塌陷区的有机物污染状况。     

逆温天气与鄂尔多斯高原中小城镇大气污染

本文根据鄂尔多斯高原逆温天气的形成，讨论了高原地区中小城镇大气污染的时空分布及控制污染的可行性途径。     

大气降尘对土壤重金属累积量估算方法探讨——以重庆市綦江县永新冶炼厂为例

中国的有色金属冶炼企业、矿区周围土壤重金属污染日趋严重.本文对可能造成土壤污染的途径进行了简要分析,并以重庆市綦江县永新冶炼厂为例,分析了冶炼厂排放废气中含重金属颗粒物沉降进入土壤的途径,结合厂址周围土壤中镍含量的监测数据,计算分析了冶炼厂投产30年后,受影响区域因大气降尘引起的土壤镍污染分布状况及趋势,估算得出每年大约有250 kg的镍沉降到厂址周围约4 km2范围内的土壤中,自然沉降率约为32%,为区域土壤重金属污染防治提供了科学依据.     

不同类型污染源颗粒物的粒度分布特征分析

对影响葫芦岛市城区环境质量可吸入颗粒物的各类污染源颗粒物的粒度成份、分布特征进行分析。采用斯托克直径ds（Stoke＇s Diameter）表示法，利用巴柯离心机对样品进行处理，得到各类排放源所排放的不同粒径的颗粒物重量百分比，为环境管理提供科学依据。     

加油站油气回收处理技术的研究及应用进展

介绍了国内外加油站油气回收处理技术现状及应用进展，阐明了国内开发的重点应是：密封加油系统及设备、吸收式油气回收装置及分散吸附集中处理系统。     

兰州城市主要大气污染治理方案和环境效益

根据兰州市经济技术条件，提出多种大气污染治理工程方案。用数值模式计算分析了这些单项方案和综合方案可减少的大气污染物排放量和空气质量改善程度，推荐了当前可行的投资低、环境效益好的优化综合方案，该综合方案可使兰州市区空气中SO2浓度下降24.6%-75.4%，TSP降10.4%-45.4%；降少数网格点外，SO2浓度都不出现超标。