砒霜生产化工厂危险废物处置工程设计

通过对砒霜生产化工厂原场址废渣及污染场地调查的基础上,进行了处置方案比选及技术经济比较,确定了就地安全填埋的处置方案。根据区域性危险废物集中安全填埋场的设计经验,本工程采用先进的HDPE双层防渗的安全填埋方式,并设置了雨水分流系统、渗滤液收集系统、封场处理和填埋气体导排系统,整个场区布置合理,对周围环境的影响小,投资少,取得了良好的社会效益和环境效益,并对危险废物处理处置工程设计中应注意的问题提出了建议。     

垃圾填埋场微生物气溶胶粒径分布研究

为了了解垃圾填埋场微生物气溶胶粒径分布规律,在北京市某垃圾卫生填埋场填埋区、渗滤液处理区、生活区分别选定监测点,利用安德森六级微生物采样器,对填埋场空气微生物进行了系统的定点取样、测定和分析。研究结果表明,空气细菌粒径分布均为第Ⅰ级(>8.2 μm)最高,填埋区空气细菌粒径呈偏态分布,渗滤液处理区、生活区分别在第Ⅳ级和第Ⅲ级出现第2个峰值。携带细菌的可吸入微粒在渗滤液处理区比例最大。空气真菌与放线菌均在第Ⅳ级分布最高,携带真菌和放线菌的可吸入粒子的比例显著大于细菌(P<0.05)。填埋区不同作业时段空气微生物粒径在各级分布比例基本一致。填埋区细菌气溶胶中值直径为5.7 μm,渗滤液处理区为3.7 μm,生活区为5.3 μm,显著大于真菌气溶胶和放线菌气溶胶的中值直径(P<0.05)。     

基于层次分析法的秦皇岛市垃圾填埋场选址评价

城市垃圾填埋场场址的选择,受到当地经济、交通、气候条件,自然地理条件,环境保护条件,水文地质工程地质条件等诸多因素影响,是一项十分复杂的工程。本文总结了秦皇岛市现有垃圾填埋场的基本情况、存在问题及其产生原因。鉴于层次分析法在多目标决策分析方面的成效,将其运用到秦皇岛市垃圾填埋场选址评价中,对研究区进行适宜性分区,依次划分为最佳场地区、适宜场地区、较适宜场地区、不适宜场地区。     

Evaluation of environmental feasibility of steel pipe sheet pile cutoff wall at coastal landfill sites

An evaluation method that can express the local leakage of leachate from joint sections in steel pipe sheet pile (SPSP) cutoff walls is discussed in this study. In particular, the evaluation of environmental feasibility (containment of leachates containing toxic substances) considering a three-dimensional arrangement and hydraulic conductivity distribution of the joint sections in the SPSP cutoff wall is compared with an evaluation that uses the equivalent hydraulic conductivity. This equivalent hydraulic conductivity assumes that the joint section and the steel pipe are integrated; therefore, the hydraulic conductivity is substituted with a uniform permeable layer. However, in an evaluation that employs the equivalent hydraulic conductivity, it is difficult to consider the local leakage of leachate containing toxic substances from the joint sections in the SPSP cutoff wall. It was established that evaluations of the environmental feasibility of SPSP cutoff walls with joint sections must take into account the local leakage of leachates containing toxic substances from the joint sections. Also, it was clarified that technologies that lower the hydraulic conductivities of joint sections in SPSP cutoff walls and also facilitate the use of sparser joint arrangements contribute significantly to increasing the environmental feasibility of SPSP cutoff walls at landfill sites.     

基于数字图像处理技术的金相分析研究

采用和改进了人际交互式图像分割算法Live-wire,对电气火灾中的典型火烧金相图和一次短路金相图进行处理,结合数字形态学操作,精确提取了两类金相图中的典型胞状晶和柱状晶结构;分析和讨论了多种结构描述子对晶格分类的作用,结果表明,离心率和晶格标记方差两个描述子能有效区分两类晶格结构;采用聚类分析和Fisher判别法,实现了对两类金相图的自动分类.     

道路交通紧急救援服务点的优化选址

针对道路交通紧急救援对公平性、效率性、事故并发性的多目标决策需求,提出用于道路交通救援点选址的多目标决策模型。该模型通过最小化最大救援时间满足救援公平性;通过最大化一次覆盖的需求量和最小化救援点到需求点总加权时间满足救援效率;通过最大化备份覆盖的需求量满足事故并发与重大事故的救援。针对多目标决策模型,开发基于模拟退火法的优化解法,结合算例分析,能够获得减少最大救援时间、最大化一次覆盖和备份覆盖需求量的多个目标方向上最优解,实现pareto最优化的成功率均在95%以上。实例计算比较表明,笔者提出的模型与算法可以为决策者提供多目标选址方案。     

北京某垃圾填埋区空气细菌浓度及粒径分布特征

以北京市某垃圾填埋区中作业区和覆盖区的空气细菌为主要研究对象,研究四个季节空气细菌浓度及粒径分布特征,得出了以下结论:垃圾填埋区作业区空气细菌浓度四季变化特征较覆盖区显著,且空气细菌浓度高于覆盖区。垃圾填埋区作业区和覆盖区四季的空气细菌粒子主要分布在前4级中,且在第Ⅵ级(<1.0μm)中分布比例最小,但分布规律不完全相同。秋季作业区最易感染人体的空气细菌浓度最高。垃圾填埋区作业区和覆盖区空气细菌中值直径最小值均出现在夏季,最大值均出现在冬季。     

新疆二噁英类POPs排放现状调查及分析

在对新疆二噁英类POPs排放调查的基础上,归纳了新疆二噁英类污染物的主要来源和分布情况,分析了新疆二噁英类POPs排放源在环境监管中存在的问题,并提出了相应的建议,对今后新疆二噁英类POPs排放的管理、控制和削减有重要意义。     

Effect of soil moisture dynamics on dense nonaqueous phase liquid (DNAPL) spill zone architecture in heterogeneous porous media

The amount, location, and form of NAPL in contaminated vadose zones are controlled by the spatial distribution of water saturation and soil permeability, the NAPL spill scenario, water infiltration events, and vapor transport. To evaluate the effects of these processes, we used the three-phase flow simulator STOMP, which includes a new permeability-liquid saturation-capillary pressure (k-S-P) constitutive model. This new constitutive model considers three NAPL forms: free, residual, and trapped. A 2-D vertical cross-section with five stratigraphic layers was assumed, and simulations were performed for seven cases. The conceptual model of the soil heterogeneity was based upon the stratigraphy at the Hanford carbon tetrachloride (CT) spill site. Some cases considered co-disposal of NAPL with large volumes of wastewater, as also occurred at the Hanford CT site. In these cases, the form and location of NAPL were most strongly influenced by high water discharge rates and NAPL evaporation to the atmosphere. In order to investigate the impact of heterogeneity, the hydraulic conductivity within the lower permeability layer was modeled as a realization of a random field having three different classes. For six extreme cases of 100 realizations, the CT mass that reached the water table varied by a factor of two, and was primarily controlled by the degree of lateral connectivity of the low conductivity class within the lowest permeability layer. The grid size at the top boundary had a dramatic impact on NAPL diffusive flux just after the spill event when the NAPL was present near the ground surface. NAPL evaporation with a fine grid spacing at the top boundary decreased CT mass that reached the water table by 74%, compared to the case with a coarse grid spacing, while barometric pumping had a marginal effect for the case of a continuous NAPL spill scenario considered in this work. For low water infiltration rate scenarios, the distribution of water content prior to a NAPL spill event decreased CT mass that reached the water table by 98% and had a significant impact on the formation of trapped NAPL. For all cases simulated, use of the new constitutive model that allows the formation of residual NAPL increased the amount of NAPL retained in the vadose zone. Density-driven advective gas flow from the ground surface controlled vapor migration in strongly anisotropic layers, causing NAPL mass flux to the lower layer to be reduced. These simulations indicate that consideration of the formation of residual and trapped NAPLs and dynamic boundary conditions (e.g., areas, rates, and periods of different NAPL and water discharge and fluctuations of atmospheric pressure) in the context of full three-phase flow are needed, especially for NAPL spill events at the ground surface. In addition, NAPL evaporation, density-driven gas advection, and NAPL vertical movement enhanced by water flow must be considered in order to predict NAPL distribution and migration in the vadose zone.     

江苏省危险化学品生产状况调查分析及监管对策

根据《危险化学品名录》,分析江苏省取得危险化学品安全生产许可证的1774家企业的化学品种类、数量、生产企业类型分布情况.结果表明,江苏省危险化学品生产企业在地域分布上苏南多于苏北;化工、建材行业的危险化学品生产企业所占比例较高;危险化学品涉及除爆炸品外的6大类,达3 790种,以生产易燃液体的企业数目为最多;有31家企业生产10种以上危险化学品.笔者建议,通过评估摸清企业安全生产状况,严格控制危险化学品企业安全生产许可证发放,实现危险化学品运输企业的动态管理,建立安全监测预警技术平台.