Ti3C2纳米层状材料对废水中Cr（Ⅵ）的光催化去除性能

以Ti₃AlC₂为原料,采用HF刻蚀工艺制备出12种Ti₃C₂纳米层状材料,对其形貌进行了表征,并考察了以其作为光催化剂对废水中Cr（Ⅵ）的处理效果。实验结果表明：HF体积分数为80%、刻蚀时间为48 h时得到的MX-80-48的形貌较好;MX-80-48具有类似石墨烯的二维层状结构,纳米层厚度约20~50 nm,孔径2~10 nm,比表面积14.8 m²/g,在400~700 nm可见光范围内表现出强烈的吸光性;当Cr（Ⅵ）的初始质量浓度为40.00 mg/L、MX-80-48投加量为200 mg/L、pH=2、反应时间4 h（暗反应1 h+光照3 h）时,Cr（Ⅵ）去除率可达100%。     

预处理垃圾焚烧飞灰作为碱胶凝材料混合材的研究

试验分析了垃圾焚烧飞灰的主要化学成分及矿物组成,探讨了预处理垃圾焚烧飞灰作为碱胶凝材料混合材的可能性.研究表明,垃圾焚烧飞灰主要由黏土类矿物组成,飞灰直接作为混合材参与水化过程会产生明显膨胀现象,加入30%(质量分数)飞灰制成的矿渣/飞灰试块在成型1 d脱膜时膨胀率达到15.7%,标准养护28 d后无侧压抗压强度只有12.4 MPa.对飞灰进行热活化预处理,900℃条件下活化效果最佳,同样的飞灰掺量下,试块在标准养护28 d后无侧压抗压强度达到46.0 MPa,膨胀现象消失,且碱胶凝材料中重金属稳定性良好.     

突发事件现场警戒区域的研究

阐述了事故危险区域、现场警戒区域的基本概念、设置目的和原则,提出将突发事故现场警戒区域分为三层,分别对应现场封锁线、警戒封锁线和交通封锁线,并就吸入毒性危害物质泄漏、燃气泄漏、建筑物火灾等事故,制定了具体的设置方法。现场警戒区域的设定,可在较小成本投入的前提下,通过采取积极的防范和应对措施,有效减少人员伤亡和财产损失,提高救援效率和效果。     

工业园区循环经济绩效评价方法研究

针对当前循环经济绩效内涵不明确,评价指标体系多局限于对循环经济发展水平等循环经济绩效评价中存在的问题,在系统归纳总结该领域研究现状基础上,明确了循环经济绩效的概念;进一步构建了基于生态效率-物质流分析的循环经济绩效评估指标体系,利用模糊数学和灰色聚类方法分别建立了循环经济绩效评估模型;最后,以上海化工园区和南通农药化学工业园为案例,对2个园区循环经济绩效进行评估。结果表明:从理论和方法上,构建的工业园区循环经济绩效评价指标体系是适用的;模糊综合评价和灰色聚类评价的结果存在一定的差异,模糊评价结果更为合理,而且该模型可以直观地表示出园区循环经济绩效的优劣势所在。进而,以上海化工园区作为标杆,针对南通农药化学工业园存在的资源效率偏低等问题,提出若干循环经济绩效改进措施。     

铜陵市资源利用与经济增长关系分析

资源利用与经济增长之间的关系是资源与环境经济学研究的重要领域。以安徽省铜陵市为例,尝试运用物质流分析方法以及最新发展的自回归分布滞后模型（ARDL）对铜陵市1990~2008年资源利用和实际GDP二者关系进行检验和分析。采用了物质流分析指标中直接物质投入来表征区域资源利用量。ARDL边界检验结果表明了资源利用和经济增长间存在稳定的长期均衡关系。进一步通过ARDL-ECM模型分析了区域经济增长对资源利用长期弹性系数和短期弹性系数,并揭示出资源利用对经济增长的短期和长期因果关系。研究结果表明当前资源投入在一定程度上拉动了铜陵经济增长。同时还对铜陵经济增长和资源保护战略提出了政策建议     

金属材料海水腐蚀试验方法的编制及标准解读

为了使相关人员更好地理解标准,更好地完成试验,回顾了我国金属材料海水腐蚀试验方法和标准的编制历程,对金属材料海水腐蚀试验的两个现行国家标准进行了解读和比较。     

Sustainability of silicon feedstock for a low-carbon society

We need to ensure the sustainable management of advanced materials, such as purified silicon, that contribute to a low-carbon society. Because a drastic increase in the demand for photovoltaic (PV) systems is tightening the supply of silicon for PV cells, the sustainability of silicon feedstock needs to be explored. For this purpose, a material flow analysis of silicon in Japan from 1996 to 2006 is presented in this paper. Our analysis finds that rapid growth in demand for polycrystalline silicon (pc-silicon) and single crystalline silicon (sc-silicon) has changed the structure of the purified silicon supply. The strong demand for purified silicon for solar cells is responsible for this change. While off-grade silicon obtained as a by-product of electronic-grade silicon (EG-Si) covered the demand for solar sells before 2000, pc-silicon is currently produced independently for solar cells via an energy-intensive process. Analysis of the resource effective-use index (REI), which indicates how effectively purified silicon is used, shows progress in the effective use of pc- and sc-silicon. REI analysis indicates that the effective use of pc-silicon is reaching a maximum, while the effective use of sc-silicon is advancing, with a corresponding increase in price. To ensure a sustainable supply of silicon feedstock, this paper proposes four solutions: (1) production of solar-grade pc-silicon by a less costly and less energy-consuming method; (2) reduction in the amount of crystalline silicon per watt in solar cells; (3) acceleration of the development and deployment of other solar cell types; and (4) reuse and recycling of solar cells in the future.     

Assessing the long-term supply risks for mineral raw materials—a combined evaluation of past and future trends

This paper develops a method for identifying and assessing long-term supply risks for mineral raw materials. The method is based on a combined evaluation of past and future supply and demand trends. By analysing raw material boom and bust cycles over the past 50 years, we have quantified indicators and defined benchmarks for identifying critical market situations. By applying the method, risks for supply shortage may be identified at an early stage. In addition, a numerical evaluation model has been developed for better comparison between various mineral raw materials. Compared to other assessment methods this method uses specific benchmarks for each raw material to better assess supply risks. The method is embedded within a systematic and comprehensive analytical approach.     

聚氨脂泡沫填缝剂生产工艺火灾危险性分析与对策

以聚氨脂泡沫填缝剂基本生产原理及其特点为基础,对生产原料进行火灾危险性分析,结果表明:该类生产场所的火灾危险等级应划分为甲类;提出聚氨酯泡沫填缝剂生产中存在的安全问题及原因;运用危险度评价法对聚氨脂泡沫填缝剂生产工艺的火灾危险性进行了定量的安全评价,得出聚氨脂泡沫填缝剂生产工艺的危险程度为高度危险;并从建筑设计、防火管理和生产工艺等方面提出了预防火灾事故发生的对策。     

Application of Defined Co-Immobilized Microbial Consortium as a Ready-to-Use Seed Inoculum in Bod Analysis

A number of microorganisms were isolated from sewage. Biochemical Oxygen Demand (BOD-5 day) analysis was carried out by individual pure cultures. The cultures giving higher or equal BOD values as compared to reference GGA solution were selected for the formulation of a defined mixed microbial consortium. This microbial consortium was co-immobilized on calcium-alginate beads. Four synthetic and six industrial samples were tested for BOD by using immobilized beads as well as sewage as source of seeding materials. BOD values obtained with beads for all the synthetic as well as industrial samples were fairly comparable with those obtained with sewage. Reusability of prepared microbial beads was also checked with different synthetic and industrial samples and was compared with reference GGA solution. The same microbial beads can be reused three times for different BOD-5 day estimations. It is recommended that immobilized microbial beads can be used as a ready-to-use seeding material for BOD analysis.