污染源废气中二噁英监测采样应注意的几个问题

解析废气中二噁英监测采样的现状及不足,针对生活垃圾焚烧炉(炉排炉)、蓄热式焚烧炉(RTO)和危险废物焚烧炉(回转窑)3种不同类型焚烧炉,考察了采样过程中烟道类型、采样时间和采样时间间隔不同对二噁英监测的影响。结果表明,在水平烟道和垂直烟道采样测得二噁英排放浓度水平相当,有垂直烟道时,优先在垂直烟道采样;间隔采样和连续采样二噁英测定结果基本一致,为了便于操作,建议均采用连续采样方式;采样时间上,生活垃圾焚烧炉应保证超过1 h,蓄热式焚烧炉以2 h左右为宜;间歇投料危险废物焚烧炉应尽量满足2 h以上,条件不许可时,可通过增加采样流量缩短采样时间保证采样量,并在危险废物完全燃烧前结束采样工作。     

The analysis of pollutant profiles by means of compositional analysis. An application to PCDD/F data

Compositional analysis consists of a group of techniques used to manipulate closed (=compositional) data, i.e. multivariate data summing to a fixed quantity (proportions, percentages). It is based on the analysis of the relations among variables and the use of logarithmic transformations. It has been claimed that this group of techniques should be used to analyse profiles of pollutant sources because profiles themselves are proportions. We show in this paper that, for the exploratory analysis of these data, a good strategy is to combine the analysis done with and without transformation because they give different and complementary insights on the structure of the data. We discuss in particular the study of processes such as the mixing of pollutants produced by different sources and the exponential decay of concentrations with distance to the source found in many studies. The clr transformation is also appropriate for the study of the variables having small proportions, which remain concealed by the abundant variables when analysed without transformation. We present simulations to illustrate these ideas and we also apply these techniques to two data sets of PCDD/F content in moss tissues.     

Lime as the source of PCDD/F contamination in citrus pulp pellets from Brazil and status of the monitoring program

After an exhaustive investigation, in 1997 the source of the milk contamination in Germany was traced to citrus pulp pellets originating from Brazil. It has been shown that lime was the source of the PCDD/F contamination of these products. After this conclusion, a continuous monitoring program has been performed over a two year period and the results are presented in this paper. Standard isotope dilution techniques were used for all samples, which were analyzed by selected ion monitoring high resolution GC–MS.     

A mixture of polychlorinated dibenzo-p-dioxins (PCDDs), dibenzofurans (PCDFs), and non-ortho polychlorinated biphenyls (PCBs) changed the lipid content of pregnant Long Evans rats

Pregnant Long Evans rats received 1.0 μg/kg of dioxin toxic equivalents (TEQ) by oral gavage on the 15th gestational day (GD 15), using a dosing mixture that contained two polychlorinated dioxins, four polychlorinated furans and three non-ortho polychlorinated biphenyls (PCBs). Rats were sacrificed on GD 16, GD 21 and postnatal day 4 (PND 4). The lipid content of fetus, pup, placenta and maternal liver, serum and adipose tissue were determined. Treated GD 16 and GD 21 fetuses had identical lipid content to the control group, yet the lipid content of treated pups on PND 4 was 32% higher than that of the control group. On the other hand, the lipid content of placenta, liver, and serum from the treated dams was 44–50%, 24%, and 38% lower than that of the control group, respectively. Thus, a low-dose mixture of dioxin-like compounds can cause changes in lipid content. The lipid content of offspring was not affected until they were exposed via lactation.     

Comprehensive study on dioxin contents in binder and anti-caking agent feed additives

Polychlorinated dibenzo-p-dioxins (PCDDs) and polychlorinated dibenzofurans (PCDFs) were determined in some additives widely employed as binder and anti-caking agents in feedstuffs, such as kaolin, bentonite, zeolite, etc. with an special attention on sepiolite samples. Owing to their physico-chemical properties, the little information of these materials reported in the literature, the variability of PCDDs/PCDFs found in a preliminary evaluation and the absence of reference materials highlighted further research needed. Therefore, an extensive study on the analytical procedures based on the classical methods was performed with sepiolite samples. The study includes evaluation of reproducibility and repeatibility. To this end, a series of intra-day and nine inter-day analysis were made. The methodolgy was also assessed against the sample size and series of 12.5, 25, 37.5 and 50 g were analyzed. In all cases, the results confirmed good correlation with the parameters evaluated.     

Curbing dioxin emissions from municipal solid waste incineration in China: Re-thinking about management policies and practices

As one of the countries with large amounts of dioxin releases, the control of dioxins is a major challenge for China. Municipal solid waste (MSW) incineration should be considered a high priority source of dioxin emissions because it is playing an increasingly more important role in waste management. MSW incineration in China has much higher emission rates of dioxins than in the developed countries, partially resulting from the gaps in the technologies of incineration and flue gas cleaning. Moreover, the current management policies and practices also contribute significantly to the problem. We recommend lowering dioxin emission standard, strengthening fly ash management, and improving regulation enforcement to reduce dioxin releases into the environment from MSW incineration. We also propose that alternative strategies should be considered on dioxin control and call for an expansion of economic instruments in waste management to reduce waste generation and thus the need for incineration.     

Experimental study on the thermal oxidation of 2-chlorophenol in air over the temperature range 450-900 degrees C

The thermal oxidation of 2-chlorophenol (2-CP) in air was investigated using a perfectly stirred reactor at 1 atm over the temperature range 450–900 °C. The relative concentration of 2-CP was 1000 ppmV (equivalence ratio Φ = 0.03). About fifty organic products were identified as trace species. The concentration profiles of 2-CP, carbon oxides as well as those of seventeen major organic intermediates and six non-to-lower chlorinated dioxins and furans were presented as a function of temperature for a residence time of 2 s. The most abundant intermediate products were carbon monoxide, 2 H-pyran-2-one, chlorobenzene, 4-cyclopenten-1,3-dione, phenol, benzofuran, 2-chlorohydroquinone and 2-indanone. These concentration profiles have revealed that temperatures of at least 900 °C were needed to completely oxidize 2-CP, CO and all other organic byproducts to carbon dioxide. Reaction pathways accounting for the formation of most observed products are proposed.     

荧光素酶表达基因法(CALUX)用于二噁英检测的研究进展

二噁英是当前环境中存在的毒性最大的物质,具有难分解性和高生物蓄积性,对人类造成了极大危害,其检测及控制至关重要。二噁英的检测方法主要包括高分辨气相色谱-高分辨质谱联机方法(HRGC-HRMS)、基于抗原-抗体的酶联免疫吸附法(ELISA)以及基于总毒性当量(TEQ)的生物检测法等,荧光素酶表达基因法(chemical-luciferase gene expression,CALUX)因其检测灵敏度和准确性高、检测范围广、操作简便快速、分析费用低等优点成为二噁英筛选检测的首选方法。本文对CALUX技术用于二噁英的检测研究进展进行了系统评述,并提出二噁英CALUX检测方法体系未来研究方向。     

The evaluation of the air quality impact of an incinerator by using MM5-CMAQ-EMIMO modeling system: North of Spain case study

The use of sophisticated air pollution modeling systems to evaluate the impact of different industrial plant emissions is currently done in an extensive way. MM5-CMAQ (PSU/NCAR and EPA, USA) is one of the most applicable air quality modeling systems to evaluate those impacts. In this contribution we present the methodology and results obtained when applying the MM5-CMAQ air quality modeling system for evaluating the potential impact of an incinerator in San Sebastián (Basque Country, Spain). We have used the EMIMO (UPM, Spain) emission model to simulate the emissions from biogenic and anthropogenic sources including traffic and tertiary sector sources. The study includes the air quality impact of a highway located near the incinerator named A8 and 6 industrial plants which already exist. The impact study has been compared with the results obtained from this highway impact and the 6 industrial plants which are normally operating during the last 30 years. The system has been prepared to simulate also Cadmium, Arsenic, Nickel, Lead and Benzo(a)pyrene air quality impacts. The PCDD/F air concentrations have been determined for the 16 toxic dioxins and furans as determined in the bibliography. The criteria pollutants such as CO, NOx, SO(2), PM(10) and O(3) have also been determined according to the different EU Directives which limit the values of such a pollutants for different periods of time.     

Trace contamination with dioxin-like chemicals: evaluation of bioassay-based TEQ determination for hazard assessment and regulatory responses

Many recent dioxin contamination events have been traced back to poisoned animal feed or feed ingredients. Therefore, enforcement authorities placed limits on the levels of dioxins in food and feed or implemented strict monitoring and control programs. The levels in force are generally expressed as TEQ values, which inherently accepts the underlying hypothesis that the effects of dioxin-like chemicals are additive. TEQ determination involves either chemo-analysis, with high-resolution gas chromatography in combination with high-resolution mass spectroscopy, or bio-analysis. Bio-analytical methods, more particularly the reporter gene expression method CALUX, are advantageous due to their high throughput rate and low cost. Moreover, the CALUX methodology detects the overall dioxin-like toxicity, rather than the limited number of compounds investigated by chemo-analysis. Bioanalytical methods such as CALUX also differ from chemo-analysis in that the contribution of antagonistic as well as synergistic effects, which violate the additivity principle, can be detected. The application of bio-analytical methods can facilitate a broader assessment of public health risks by intensifying the current monitoring programs in terms of both sample numbers and types. Bio-analysis provides information on the total dioxin-like activity of the samples under study (hazard assessment); however, chemo-analysis is still needed to identify the predominant contaminants (congener identification) for risk management.