Modelling the kinetics and equilibrium properties of cadmium biosorption by river green alga and water hyacinth weed

Cadmium biosorption properties of non-living, dried river green alga from a river source, and water hyacinth weed, Eichhornia crassipes from a lake in Zimbabwe have been investigated. The cadmium uptake was found to depend on initial pH, uptake being apparently minimal at low pH values and increasing with an increase in pH. Cadmium biosorption kinetics by both samples is fast, with 80% of total uptake occurring within 60?min. The effect of initial solution pH and initial cadmium concentration on cadmium biosorption from a cadmium solution has been studied. The data for algal biomass fitted the Langmuir monolayer adsorption isotherm, while the biosorption of the metal by water hyacinth weed fitted the Freundlich adsorption isotherm with 1/n values all less than 1. Maximum metal uptake capacities were recorded using 0.35?g of biomass and a 250?mg?L^?1 cadmium solution at pH 6.5 and at 25°C and these were about 85 and 50?mg?L^?1 for water hyacinth weed and green alga, respectively, showing that water hyacinth weed offered a greater potential for cadmium uptake. The absorption was described by pseudo-second order rate model and the rate constant and equilibrium sorption capacity are reported.     

A nanosilver-based spectrophotometric method for sensitive determination of methyl violet in river water

A method is reported for the determination of methyl violet in the range of 10–120 nmol L^?1. The method is based on the catalytic effect of silver nanoparticles (AgNPs) on the oxidation reaction of methyl violet by potassium bromate in acid medium. The reaction is followed spectrophotometrically by measuring the change in absorbance () at 620 nm using a fixed time method. The reaction variables were optimized in order to achieve highest sensitivity. The 3б criterion detection limit was 5 nmol L^?1, and the relative standard deviation for ten replicate determinations at a concentration of methyl violet of 15 nmol L^?1 was 0.97% (n = 10). The method was successfully applied to the determination of methyl violet in river water samples.     

Presence of metals in drinking water distribution networks due to pipe material leaching: a review

Drinking water quality should remain constant from the drinking water treatment plant to the consumer's tap. However, water quality characteristics might be affected by interactions with pipe materials. This review describes the iron, copper, lead, zinc, aluminum, chromium, and cadmium in drinking water leached from the pipe material present in drinking water, as well as the factors and mechanisms that affect leaching processes. Data analysis suggests that monitoring the water quality in distribution systems is important for their proper management; however, the low measured concentrations highlight the need for sensitive sensors. In addition, further research is necessary to anticipate possible future effects before the installation of new materials/infrastructure or changes in water source/treatment.     

Trihalomethanes formation in water treatment plants and distribution lines: a monitoring and modeling scheme

Monitoring and modeling of the concentrations of trihalomethanes (THMs) within four water treatment plants (WTPs) and distribution lines in Fayoum City, Egypt, were studied. Sampling sites for raw and treated waters were determined by global positioning system and the Arc geographic information system software was used for mapping. THMs were monitored using 25 sampling points located at the plant exit and through the distribution lines up to the plant extremity. Results indicated that the THMs concentration varied significantly but it was very rarely higher than the allowed maximum contaminant level of 100 μg L^?1. However, at the dead zones in the distribution lines, the THMs increased by about 160% compared to in-plant level. Furthermore, the level of THMs in hot months was about 1.3 times higher than in cold ones. The influence of some independent variables such as temperature, pH, ammonia concentration, total organic carbon and color were investigated by Pearson model to find their correlation with the rate of THMs formation in WTPs. The resulted R values ranged from 0.81 to 0.98. Successful application of the model to a selected region on the distribution lines has resulted in a correlation coefficient of 0.98.     

Determination of cobalt by air-assisted liquid–liquid microextraction

Abstract

A rapid and selective technique for extraction, preconcentration and determination of trace amounts of cobalt in water and pharmaceutical samples by air-assisted liquid–liquid microextraction combined with flame atomic absorption spectrometry is proposed. 1-Nitroso-2-naphthol is used as a complexing agent and 1-octanol as an extraction solvent. Parameters relevant for analytical effectivity, i.e. pH of sample solution, concentration of complexing agent, volume of extraction solvent, and number of extraction cycles are optimized using a Box–Behnken design. At optimum conditions, a dynamic linear range of 5–600?µg L^?1 is obtained, with a limit of detection of 1.2?µg L^?1. The method is used for determination of Co(II) in environmental water and pharmaceutical samples.     

Sea water quality monitoring in Rhodes and Cos (Greece)

During the years 1983–1986, a program aiming at monitoring water quality of the most crowded beaches, as well as assessing and minimizing pollution from certain land based sources was carried out in Rhodes and Cos. The program was directed towards inspections of treatment plants as well as laboratory analyses of treated effluents from large hotels. As a result, almost one in four hotels was obliged to construct a new treatment plant. In order to help personnel to improve plant efficiency through day‐to‐day maintenance a three day seminar was held in June 1985. Sea water quality parameters (total coliforms and E. coli) were found to be well below the limits set by E.E.C. directives.     

Regression models for octanol‐water partition coefficients,and for bioconcentration in fish

Octanol‐water partition coefficients (P) of a number of organochlorine insecticides (OCs) are presented. The merits of log‐log regressions between experimental ? values and calculated estimates of P, solute activity coefficients in water, solute molecular surface area data, and reversed‐phase liquid‐chromatographic net retention data, are critically evaluated for several classes of pollutants: polycyclic aromatic hydrocarbons (PAHs), chlorinated benzenes, chlorinated biphenyls and OCs. Special attention is paid to the predictive accuracy of such semi‐empirical regressions in connection with possible effects of solute molecular shape and polarity.

Finally, bioconcentration and ‐accumulation of hydrophobic pollutants in fish are briefly discussed.     

Arsenic species in the well water and sediments of the blackfoot disease area in Taiwan

The blackfoot disease (BFD) observed in southwestern Taiwan is due to drinking high arsenic concentrations in well water. This paper presents some results concerning the distributions of arsenic species in water and sediments collected in the BFD (well, river and coastal) area and the background (lake and ocean) area for comparison. The results show that the concentrations of arsenate (870 ± 26 ug/L) and arsenite (70.2 ± 2.6 ug/ L) in well waters, and the contents of arsenic (1640 ug/g) with high percentage of easily reducible (Fe and Mn oxides, 91.7%) and exchangeable and carbonate (4.6%) phases in well sediments were much higher than those in river, lake and coastal samples. Low arsenic (3.46–31.8 ug/g) with high percentages (73.8–97.3%) of detritus and minerals phase with low percentages (0.4–9.8%) of total carbonate and exchangeable phases were found in the river and coastal samples in the BFD area as well as the lake and ocean samples in background area. It might suggest that the higher concentrations of toxic As(III) in well water and arsenic with higher values of easily reducible, carbonate and exchangeable phases in the well sediments, combined with the higher values of dissolved organic carbon, humic and fulvic acids and aromatic carbon as well as the higher fluorescence indensity in the well water are the key factors to cause the BFD in Taiwan.     

Ground water pollution by pesticides at the watershed‐soil catena scale: Lindane at the lower Colorado river basin (Argentina)

The movement of Lindane from application points at the surface soil towards the underground water and further transport within this compartment at the watershed‐soil catena scale, was inspected by measurements of the pesticide concentration in soil water at a controlled experiment where it was applied at a usual label dose. The concentrations of Lindane in soil water and the upper phreatic level were also measured at successive dates in samples obtained from a net of phreatimeter probes distributed over the area (1,500 km²) of the lower Colorado River basin (Bs. Aires, Argentina). The location of cultivated‐irrigated areas within the watershed was inferred from NDVI (Normalized Difference Vegetation Index)‐1 km‐10 day AVHRR images obtained at successive dates during the irrigation season. Feasible paths of underground gravitational water flows were computed by means of a GIS‐simulation model on the basis of local terrain slopes and aspects. The pattern of Lindane distribution over the basin was explained on the basis of the distribution of diffuse sources, the patterns of percolation and groundwater flows and the thermodynamic characteristics of the pesticide.     

Determination and QSPR analysis of log Kow and log Koc for fluorine containing benzene derivatives

Octanol‐water partition coefficients (Kow) and soil organic carbon sorption coefficients (Koc) were determined for 14 fluorinated benzene derivatives. Quantitative structure‐property relationships were developed using molecular connectivity indices and quantum chemical parameters to analyze the most significant factors influencing these physico‐chemical properties of the compounds. The substitution by F in benzene derivatives has greater influence on Koc than on Kow.