Agent-based framework for modeling and simulation of resources in self-sustainable human settlements: a case study on water management in an eco-village community in Croatia

A newly developed agent-based framework for modeling, simulation, and evaluation of resource management in self-sustainable human settlements is presented, along with the ability of the framework to prolong the self-sustainability of the observed human settlement system in the simulation environment. In this study the focus is on the analysis of a conducted water management simulation based on observations of an existing eco-village in Croatia, in the context of producing, storing, and consuming water as a resource. The conducted research shows that the developed framework was able to prolong the self-sustainability of localized water production, storage, and consumption dynamics when managing the water allocation with the use of self-sustainability mechanisms, in comparison to water management without using such mechanisms, under the same initial conditions. The work is placed within the context of sustainable development, Internet of Things, as well as Environmental Internet of Things areas of research, analyzing the ambiguous relationship between the terms ‘sustainable development’ and ‘self-sustainability’.     

塔河油田一号联合站污水处理试验研究

塔河油田一号联合站(塔一联)稠油污水具有粘度大、油水密度差小、乳化严重等特点,它的回用与外排具有一定的难度.通过实验室和现场试验研制开发的破乳剂和混凝剂,强化了除油效果,减轻了过滤系统的负荷,处理污水达到了注水水质指标.     

吸收塔浆液起泡原因分析及消泡剂的选择

针对在多个湿法脱硫项目中出现的吸收塔浆液起泡现象,分析了引起塔内浆液起泡的原因,提出了相应的处理措施,探讨脱硫吸收塔浆液起泡专用消泡剂的作用原理及选择原则。     

废钻井液固化剂的筛选实验

针对目前许多废钻井液固化剂产品达不到降低污染物浓度的要求,而效果较好的产品价格昂贵,处理成本高,难以推广使用的问题,选取了9种固化剂进行固化实验,通过针入度测定仪、固化效果比对,参考相应市场价格,筛选出经济效益较高的固化剂,为同行业开展固化处理提供参考和借鉴。     

Four kinds of capping materials for controlling phosphorus and nitrogen release from contaminated sediment using a static simulation experiment

• Lanthanum modified bentonite (LMB) can effectively absorb phosphorus (P). • Water treatment plant sludge (WTPS) capping is effective for controlling P release. •Aluminum-based P-inactivation agent (Al-PIA) is an efficient P control material. •The P adsorbed by WTPS and Al-PIA is mainly in the form of NAIP. We determined the effects of quartz sand (QS), water treatment plant sludge (WTPS), aluminum-based P-inactivation agent (Al-PIA), and lanthanum-modified bentonite (LMB) thin-layer capping on controlling phosphorus and nitrogen release from the sediment, using a static simulation experiment. The sediment in the experiment was sampled from Yundang Lagoon (Xiamen, Fujian Province, China), which is a eutrophic waterbody. The total phosphorus (TP), ammonium nitrogen (NH₄⁺-N), and total organic carbon (TOC) levels in the overlying water were measured at regular intervals, and the changes of different P forms in WTPS, Al-PIA, and sediment of each system were analyzed before and after the test. The average TP reduction rates of LMB, Al-PIA, WTPS, and QS were 94.82, 92.14, 86.88, and 10.68%, respectively, when the release strength of sediment TP was 2.26–9.19 mg/(m²·d) and the capping strength of the materials was 2 kg/m². Thin-layer capping of LMB, WTPS, and Al-PIA could effectively control P release from the sediment (P<0.05). However, thin-layer capping of LMB, Al-PIA, and QS did not significantly reduce the release of ammonium N and organic matter (P > 0.05). Based on our results, LMB, Al-PIA, and WTPS thin-layer capping promoted the migration and transformation of easily released P in sediment. The P adsorbed by WTPS and Al-PIA mainly occurred in the form of NAIP.     

不同聚合度的聚磷酸铵灭火性能研究*

为考察聚磷酸铵（APP）干粉灭火剂的聚合度对其灭火性能的影响,选用3种不同聚合度的APP,结合其晶体结构、粒度分布及热性能测试,并通过粉体杯式燃烧器进行小尺寸灭火实验,对比3种样品的灭火性能及灭火机理,研究聚合度与其灭火性能的关系。热性能测试结果显示,聚合度的升高会导致APP的热稳定性下降,随着聚合度从80升至1 500,其初始分解温度从326.11 ℃降低至321.54 ℃,失重率从75.21%增加至79.66%。实验结果表明:随着APP聚合度的增加,火焰降温速率升高,最小灭火浓度（MEC）降低,灭火性能增强,当聚合度为1 500时,MEC为118.143 g/m3。聚合度的升高有助于APP在进入火场后更早、更充分地与火焰发生反应,从而使灭火性能得到提升。     

哈龙固定灭火系统替代技术

介绍了哈龙固定灭火系统淘汰背景,哈龙灭火系统替代技术发展现状。结合消除建审工作经验,阐述了作为哈龙替代系统且目前在国内工程实践中应用的CO2灭火系统、INERGEN灭火系统、FM-200灭火系统及EBM灭火系统主要性能及与哈龙系统的差异,探讨哈龙替代系统技术发展趋势,对气体灭火系统设计选型有一定参考价值。     

利用废聚苯乙烯泡沫塑料制抗冻胶粘剂

以废聚苯乙烯泡沫塑料为主要原料,经溶剂消泡、改性后可制得低毒性的、粘接强度高的、低成本的改性抗冻胶粘剂。对原料的用量、低毒性混合溶剂的选择和配比、改性剂的选择进行了试验,并通过正交试验优化出主要原料的最佳配比,当聚乙烯醇缩甲醛：废聚苯乙烯泡沫塑料：酚醛树脂的质量比为25：38：1时,胶粘剂的剪切强度可达1.40MPa以上。     

壳聚糖包覆微胶囊红磷的制备及性能表征

目的 降低红磷(RP)烟火剂的吸湿率及感度,以此提高其使用过程中的安全性能.方法 以生物基材料壳聚糖(CS)为囊壳结构,采用高效简便的工艺,制备壳聚糖包覆微胶囊红磷(CSRP),对CSRP进行红外光谱测试(FTIR)、X射线电子能谱分析(XPS)、扫描电子显微镜(SEM)测试及热重(TG)测试,并对RP及CSRP进行吸...     

火电站污水处理厂最佳投药量优化试验研究

火电厂污水水质和水量变化较大,絮凝剂和助凝剂投药量准确与否决定去除效率和运行成本,本研究针对火电厂实际运行情况,通过静态和动态实验,比较去除效率。根据水质和水量的变化,找到最佳投药量,为污水处理厂的最佳运行提供了参考依据。