金属系无机抗菌材料研究进展

主要介绍金属系无机抗菌材料。从材料的选择和合成方面,讨论了材料的特性和抗菌功能相结合的途径,归纳出抗菌材料的制备工艺的一般规律,为开发适合我国国情的无机抗菌材料提供思路。     

高分子吸水树脂作为蓄冷材料的性能研究

本文研究了不同吸水倍率的高分子吸水树脂的相变温度、相变潜热及作为蓄冷材料在35℃环境下的相变时间,并与冰做了对比。结果显示：吸收不同倍率水的高分子树脂。相变温度和相变潜热基本与水相似,随着吸水倍率的增加,相变潜热越接近于水的潜热;在相同条件下放置于隔冷袋中的高分子吸水树脂．在35℃高温环境中,可以维持20℃以下低温5h,比冰多了将近1h,克服了渗漏的缺点,在蓄冷领域表现出了明显的优势。     

Effects of release pressure on the transportation characteristics in pipeline and the diffusion behaviors in enclosure space of typical gas extinguishing agent

Reducing the release pressure of fire extinguishing systems can decrease potential safety hazards in large transport airplanes. To explore whether reducing the release pressure can achieve the release effect required by the airworthiness standards or not, the transportation characteristics in the pipeline and diffusion behaviors in the enclosure space of a typical fire extinguishing agent (Halon 1301) were investigated under five release pressures in the present study. The effects of the release pressure on the degree of superheat, injection duration, jet structure, and concentration distribution of Halon 1301 were analyzed. The results show that both of the degree of superheat and the injection duration decrease with an increase in the release pressure. The supplement of bubble expansion in the fire extinguishing agent can slow down the pressure decrease in the vessel. Both of the maximum and mean values of the pipeline differential pressure increase with an increase in release pressure. The maximum value of the jet angle decreases linearly with the increase in release pressure, and the jet deflects upward owing to the effects of buoyancy. The maximum concentration value decreases with an increase in the distance from the nozzle. The maximum concentration values in the near field from the nozzle increase with an increase in the release pressure. Under five release pressures, the concentration and holding time (duration above 6% volume concentration) of Halon 1301 on the centerline of the jet meet the requirements of airworthiness provisions.     

两种粉煤灰的烟气脱硫实验

采用粉煤灰(FA)和Ca(OH)2水合制得的高活性吸收剂作为二氧化硫的干法脱硫剂，重点研究了两种粉煤灰(电除尘灰和湿式水膜除尘灰)在同一配比、同一水合温度、同一水合时间下的脱硫效率，结果表明：电除尘灰比湿式水膜除尘灰脱硫效率高，并且电除尘的脱硫效率略微低于活性炭，同时介绍了粉煤灰的脱硫机理。     

分光光度法测定COD_(Cr)的试验条件选择

用分光光度法测定水中化学需氧量ＣＯＤＣｒ,通过正交试验选择氧化的最佳选择。试验结果表明对ＣＯＤＣｒ值为５０～１０００ｍｇ／Ｌ的水样：氧化剂Ｋ２Ｃｒ２Ｏ７用量为０．２０～０．４０ｍｏｌ／Ｌ,催化剂Ａｇ２ＳＯ４用量为１０ｇ／ＬＨ２ＳＯ４,消解时间１０ｍｉｎ,加热温度１８０℃。用ＣＯＤＣｒ为１３８ｍｇ／Ｌ的质控标样进行验证试验,其绝对误差为０．５～３．０ｍｇ／Ｌ。与标准方法相比用分光光度法测定ＣＯＤＣｒ具有分析误差小,省时、省力,节约药剂的特点。     

COD_(Cr)测定中排除氯离子干扰的进一步探讨

废水中化学需氧量的测定采用重铬酸钾法［１］,大多数情况下都存在Ｃｌ－干扰,其排除方法用ＨｇＳＯ４掩蔽,通过实验探讨不用剧毒药品ＨｇＳＯ４掩蔽Ｃｌ－的干扰,而用ＣＯＤＣｒ总量减去Ｃｌ－的量。实验结果表明：当测定化学需氧量较低而Ｃｌ－含量高的水样时,即使采用掩蔽Ｃｌ－也会产生较大的误差,而用测定值减去０．２２６［Ｃｌ－］之值更接近真值。     

复合螯合剂/活性碳分离富集和ICP—AES同时测定水样中痕量元素

本文提出将复合螯合剂（NaDDTC／8—Oxin）饱和吸附于活性碳上作为吸附材料．分离富集和ICP—AES同时测定水中痕量金属元素的方法。用ICP—AES研究了该吸附材料对某些痕量元素的吸附和解吸性能；考察了共存元素的影响。方法应用于湖水中Fe、Cu、Mn、Y和Sc的测定，检出限为ng／ml级，RSD为1．9％～4．4％，加入回收率81％～101％间，试样分析结果满意。     

微波催化氧化法处理炼油废水

研究了应用微波辐射技术处理炼油废水,考察了活性炭用量,微波辐射时间,微波辐射功率,双氧水用量等因素对出水水质的影响。设计了实际废水的实验流程,检测了一部分生活杂用水(CJ25.1-89)中的主要指标,取得了较好的结果。     

Non-aqueous-phase-liquid breakthrough during evaporative drying of clay barriers

In this study, an attempt has been made to model a real field scenario, whereby an initially almost saturated clay liner in a waste site is gradually drying, due to evaporation at its lower boundary. A detailed conceptual model that deals with the penetration and breakthrough of non-aqueous-phase-liquid (NAPL) in clay liners is introduced. Water content of clay samples was monitored during ambient evaporation through apertures at the base of sample holders. Clay drying rate served as the primary parameter for the NAPL breakthrough study. The interconnection between drying rates, structural damage formation (cracks and suction) and NAPL penetration is especially addressed. The processes taking place in the clay samples during drying appear to be associated with the capillary effects between the different fluid phases in the vicinity of either the NAPL-clay or the clay-air boundaries. A conceptual model of NAPL penetration and breakthrough of the clay layer has been considered, based on both indirect and direct observations of structural damages produced on either clay boundaries. A mutual interaction between these two boundaries is suggested and discussed. NAPL breakthrough is suggested to take place through cracks initiated on the upper soil surface.     

四氯化碳的生产与应用及其淘汰策略

四氯化碳是一种消耗臭氧层物质,其生产和消费都面临着严峻的淘汰形势.简要叙述了四氯化碳的生产技术,以四氯化碳为原料生产大宗化学品和精细化学品的转化技术,四氯化碳作为化工助剂在我国的应用情况以及相应的淘汰方法和技术进展.