袋式除尘器运行中常见问题浅析

已广泛应用于各行业中的袋式除尘器在运行中存在如滤袋损坏、结露、箱体破损、运行阻力高、清灰装置失灵等诸多问题,本文就袋式除尘器在实际运行中存在的问题进行了详细的分析讨论。     

A型导流片在静电除尘器中的应用

静电除尘器内气流分布是影响其脱尘效率的主要因素之一。为提高静电除尘器的除尘效率,国内外学者及工程师利用试验与计算机模拟的方式对如何调节除尘器内的气流分布进行了大量的研究。无论是早期提到的均匀气流法,还是近年来提到的斜气流理论,都提及了使用多孔板调节静电除尘器内气流的方法。但是针对某些静电除尘器及其设计要求来说,单纯的使用孔板进行调节气流已无法满足设计方提出的气流分布指标。在这里A型导流板结合孔板被用来调节静电除尘器气流进口罩内的气流,用以达到优化集尘区气流分布的目的。通过使用数值模拟的方法计算了静电除尘器内三维气流分布状况,对比了针对某静电除尘器项目单独使用多孔板调节气流的分布与使用多孔板与A型导流片相结合调节气流的方法,提出A型导流片在调节静电除尘器气流的优势,及较好的工程应用前景。     

电除尘器斜气流状态下粉尘沉降试验研究

针对电除尘器在实际运行过程中出现的除尘效率下降问题,提出斜气流这一新型技术,对均匀气流与斜气流分布状态进行可视化研究;在两种气流状态下进行粉尘沉降试验,对试验结果进行对比分析、总结相应规律;对我国电除尘器气流技术的发展提出了建议。     

300MW机组电袋复合除尘器的应用探讨

通过技术、经济比较,确定了宁夏大坝发电有限责任公司3号机组电除尘器改造为电袋复合除尘器的方案。改造后电袋除尘器各项指标均达到设计要求,保证300MW发电机组满负荷运行。     

利用高频电源提高除尘器除尘效果研究

针对锅炉静电除尘器烟尘排放浓度达不到天津市环保要求的问题,为了提高除尘器的除尘效果,通过采用将除尘器常规工频电源改为高频电源的方案,确保锅炉烟尘排放浓度最终达到30mg/Nm3的环保要求。文章分析了除尘器出口烟尘含量高的原因,阐述了高频电源的优点及在除尘器中的应用,并提出了改造技术方案。     

电-袋复合式除尘器运行管理探讨

针对电-袋复合式除尘器的特点,分析了电-袋复合式除尘器在运行过程中应注意的事项,提出了电-袋复合式除尘工艺过程的运行管理要求,探讨了电-袋复合除尘器设备管理以及现场运行参数的设定,以实现提高电-袋复合式除尘器使用寿命及降低能耗的目的。     

大型燃煤电站电袋复合除尘器的应用研究

对大型燃煤电站电一袋复合除尘技术进行了较全面的分析研究,如气流组织最优方案确定、脉冲喷吹系统选型及参数优化、粉尘荷电对滤料阻力的影响及高压电源的优选等。研究表明对电袋复合除尘器来说,袋式除尘区采用阶梯式布置是一种较为理想的气流组织方式,活塞式脉冲阀具有更好的清灰性能,粉尘的荷电有助于减小除尘设备的阻力,三相电源的性能优于单相电源。     

燃煤电厂电-袋复合除尘器滤袋损坏原因分析

着重对电-袋复合除尘器存在的PPS滤袋短期内出现非寿命期大面积损坏的原因,以及针对电-袋复合除尘工艺技术中的部分不同意见,进行了进一步的分析和探讨;提出电-袋复合除尘器与袋式除尘器在技术经济上并没有特殊优势,且电-袋复合除尘器在应用中已发现了一些重大问题,因而应引起有关重视,在选择采用这种工艺技术时要慎重。     

Adsorption of sulfamethoxazole on functionalized carbon nanotubes as affected by cations and anions

The environmental risks of antibiotics have attracted lots of research attention, but their environmental behavior is not clear yet. Functionalized carbon nanotubes (CNTs) were used as model adsorbents and sulfamethoxazole (SMX) was used as a model antibiotic to investigate the effect of both cations (Ca²⁺, Cs⁺) and anions (phosphate) on antibiotics adsorption. Various mechanisms (such as electrostatic interaction, hydrophobic interaction, π-π and hydrogen bonds) play roles in SMX adsorption. Cations and anions could “wedge into” these mechanisms and thus alter SMX adsorption. This study emphasized that both increased and decreased SMX adsorption could be observed with the addition of cations/anions, depending on environmental conditions (such as pH in this current study). The net effect is the balance between the increased and decreased effects. The contribution of different mechanisms to the overall antibiotic adsorption on solid particles should be identified to accurately predict the apparent effect by cations and anions.     

Adsorption behavior of perfluorooctanesulfonate (PFOS) and perfluorooctanoate (PFOA) on boehmite

Understanding the interaction of perfluorochemicals, persistent pollutants with known human health effects, with mineral compounds in surface water and groundwater environments is essential to determining their fate and transport. Kinetic experiments showed that adsorption equilibrium can be achieved within 48 h and the boehmite (AlOOH) surface is receptive to perfluorooctanesulfonate (PFOS) and perfluorooctanoate (PFOA) adsorption. The adsorption isotherms estimated the maximum adsorption capacities of PFOS and PFOA on boehmite as 0.877 μg m⁻² and 0.633 μg m⁻², respectively. Compared to the adsorption capacity on γ-alumina, the abundant hydroxyl groups on boehmite surfaces resulted in the 2-3 times higher adsorption of PFOS and PFOA. Increasing solution pH led to a moderate decrease in PFOS and PFOA adsorption, owing to an increase in ligand exchange reactions and the decrease of electrostatic interactions. The presence of NaCl and CaCl₂ in solution demonstrated negative effects for PFOS and PFOA adsorption on boehmite surfaces, with potential mechanisms being electrical double layer compression, competitive adsorption of chloride, and the Ca²⁺ bridging effect between perfluorochemicals.