余热利用高效节能电除尘技术及工程应用

论述了余热利用高效节能电除尘技术的定义、工作原理,介绍了燃煤电站采用烟气余热利用高效节能电除尘技术的几种典型布置方式。重点介绍了该技术在宁德电厂600MW燃煤锅炉上的工程应用情况,通过烟气余热利用高效节能电除尘技术达到了"提效"和"节能"的双重目的。     

Applications of intrinsic safety characteristic parameters of propellant dust: Commercial multi-tube pyrotechnic hazard assessment

Fireworks are widely used in festivals around the world, but the safety issue during preparation the manufacture, storage, and operation of pyrotechnics has also been highly valued. Human operation error and insufficient recognition of the safety characteristics of pyrotechnics are the main factors in pyrotechnic incidents in Taiwan. This study considers thermal and explosion safety by electrostatic sensitivity, minimum ignition temperature, and explosion characteristics of propellant dust in commercial multi-tube pyrotechnics. The results show that propellant dust is not sensitive to static electricity, but it was ignited at 260 °C environment temperature. The lower explosion limit of propellant dust was 125–150 g/m³, which provided an effective control of the dust concentration in the workplace. It was also found that the explosive level of the propellant dust belonged to St-1, which is exceptionally close to St-2 explosion influence, and that cannot be ignored. The high temperature associated with the explosion reminded that after the firework is launched, it should be cooled before leaving. Combining the above results, this research suggests the environmental operation temperature and dust concentration should be controlled within a safer range to effectively avoid the occurrence of dust fire or explosion and substantially enhance the safety of the pyrotechnic industry.     

适应低排放的电除尘技术探讨

针对高标准的排放要求以及将进一步提高的排放标准,对电除尘器是否能满足目前的排放标准和低排放要求进行了研究。通过对国内110个机组配套电除尘器实际应用情况调查和国外燃煤机组电除尘器应用分析,客观地评价了电除尘器对国内煤种的适应性,指出移动电极式电除尘器、双极异距电流体微粒聚合器、烟气调质、湿式电除尘器、低低温电除尘器等新技术的发展和综合应用是满足30mg/m3低排放标要求的最佳选择。     

Evaluation of the parameters influencing electrostatic charging of powder in a pipe flow

Triboelectric charging of powders during pneumatic transport can lead to hazardous spark discharges. In this study, the charging process was studied numerically by means of large eddy simulations. A range of design parameters was then analyzed statistically applying the Design of Experiments methodology. It is shown that the electric charge of the powder can be significantly decreased by reducing the conveying air velocity. Furthermore, the usage of pipes of a larger diameter and the application of higher solid mass flow rates also reduce the powder charge.     

多孔泡沫金属电除尘器净化柴油机排气微粒的方法研究

以柴油机为研究对象,研究了净化柴油机排气微粒的新技术。介绍了柴油机排气微粒的特性、净化技术及电除尘器的基本工作原理以及工作特性。说明了多孔泡沫金属的特性,并设计了净化柴油机排气微粒的以多孔泡沫金属为集尘极的电除尘器结构及原理,分析了该净化装置的优点。     

电除尘器的新技术及其展望

简要介绍并分析了电矩收尘、透镜式电除尘器、雾滴荷电等除尘理论以及电除尘器本体和供电控制方面的新技术,分析和展望了电除尘器的未来发展,可为我国电除尘器的研究开发和运行改造提供参考。     

袋式除尘器在燃油锅炉上的应用

从设计理念和实践2个方面介绍了袋式除尘器在煤油锅炉上的应用，为其在电力行业的推广应用提供了经验。     

贵冶50 m2低温电收尘器的改进

详细介绍了江西铜业公司贵溪冶炼厂50m^2低温电收尘器的工作原理及生产实践中存在的问题。提出了有效的改进措施。效果显著。     

中铝山西分公司氧化铝厂粉尘治理

介绍了山西企业氧化铝熟科窑收尘系统，分析了烟尘排放浓度超标的原因，并就提高收尘效率、降低氧化铝厂粉尘污染提出了改进意见。     

电除尘器集散控制系统的仿真研究

介绍了电除尘器集散控制系统的仿真研究。基于不同运行工况的需求，建立了一系列仿真数学模型；设计并开发了电除尘器集敢控制系统的仿真软件；通过仿真实验。验证了所建立的仿真数学模型正确合理。所开发的仿真软件能模拟电除尘器集散控制系统的全部功能。