Modelling assessment of PM10 exposure control policies in Northern Italy

To assess the impact of three different emission reduction scenarios on PM10 concentrations in Northern Italy, the TCAM multiphase model has been applied in the framework of the CityDelta III-CAFE EU project. The considered domain, that is characterized by high urban and industrial emissions and a dense road traffic, due to frequently stagnating meteorological conditions is often affected by severe PM10 levels, far from the European standard regulations. The impact evaluation has been performed in terms of both yearly mean values and 50 g/m³ exceedance days for the 2004 Base Case simulation. The results show that the three selected emission reduction scenarios up to 2020 improve air quality all over the domain, in particular, in the area with higher emission density.     

Combustion and inorganic bromine emission of waste printed circuit boards in a high temperature furnace

High temperature combustion experiments of waste printed circuit boards (PCBs) were conducted using a lab-scale system featuring a continuously-fed drop tube furnace. Combustion efficiency and the occurrence of inorganic bromine (HBr and Br₂) were systematically studied by monitoring the main combustion products continuously. The influence of furnace temperature (T) was studied from 800 to 1400 °C, the excess air factor (EAF) was varied from 1.2 to 1.9 and the residence time in the high temperature zone (RT_HT) was set at 0.25, 0.5, or 0.75 s.Combustion efficiency depends on temperature, EAF and RT_HT; temperature has the most significant effect. Conversion of organic bromine from flame retardants into HBr and Br₂ depends on temperature and EAF. Temperature has crucial influence over the ratio of HBr to Br₂, whereas oxygen partial pressure plays a minor role. The two forms of inorganic bromine seem substantially to reach thermodynamic equilibrium within 0.25 s. High temperature is required to improve the combustion performance: at 1200 °C or higher, an EAF of 1.3 or more, and a RT_HT exceeding 0.75 s, combustion is quite complete, the CO concentration in flue gas and remained carbon in ash are sufficiently low, and organobrominated compounds are successfully decomposed (more than 99.9%).According to these results, incineration of waste PCBs without preliminary separation and without additives would perform very well under certain conditions; the potential precursors for brominated dioxins formation could be destroyed efficiently. Increasing temperature could decrease the volume percentage ratio of Br₂/HBr in flue gas greatly.     

汽油加生物添加剂对发动机废气排放的影响研究

通过发动机的台架试验,系统研究了将一种热带植物提取物作为添加剂加入到不同成分的汽油中对汽油机废气排放特性的影响．结果表明：对于93^#高清洁汽油和93^#成分汽油,除了未燃碳氢(HC)略有上升外,其他排放物如氮氧化物NOx、一氧化碳等有所减少,CO2排放有明显的改善．对于乙醇汽油,则HC和CO2略有上升．     

商用垃圾流化床焚烧炉多环芳烃排放的环境评价

对流化床垃圾焚烧炉中PAHs的排放特性进行了研究 .结果表明 ,烟囱烟气为流化床垃圾焚烧炉PAHs排放的主要途径 ,日排放量要高于其它途径 1— 2个数量级 ,且以低分子量物质为主 .脱除剂的添加对烟气中PAHs有减少的作用 ,但却增加了循环出口水中PAHs含量 .不同工况时PAHs环境排放毒性有变化 ,垃圾与煤混烧大于全煤 ,添加脱除剂大于未添加工况 ,但少于垃圾比例高的工况 .垃圾比例越高 ,毒性越大     

中国NOx控制制度研究

中国NOx污染呈现总量逐年增加的趋势,已成为大气污染治理的主要内容.从NOx的控制制度、排放指标上对我国现行NOx控制体系进行了分析,并对我国进一步完善NOx控制制度及标准提出了建议.主要建议有(1)降低NOx控制标准适应当前环境状况;(2)应用科学方法,制订合理的NOx总量控制标准和制度;(3)制订氮氧化物排放标准;(4)浓度控制和总量控制结合.总量控制的实施要注意污染物排放标准制定的政策取向;总量控制法的基本原理和程序;总量控制结合排放标准控制.     

Reviews of emission of biogenic volatile organic compounds (BVOCs) in Asia

Biogenic volatile organic compounds (BVOCs) in the atmosphere play important roles in the formation of ground-level ozone and secondary organic aerosol (SOA) in global scale and also in regional scale under some condition due to their large amount and relatively higher reactivity. In places with high plant cover in the tropics and in China where air pollution is serious, the effect of BVOCs on ozone and secondary organic aerosols is strong. The present research aims to provide a comprehensive review about the emission rate, emission inventory, research methods, the influencing factors of BVOCs emissions, as well as their impacts on atmospheric environment quality and human health in recent years in Asia based on the summary and analysis of literatures. It is suggested to use field direct measurement method to obtain the emission rate and model method to calculate the emission amount. Several recommendations are given for future investigation and policy development on BVOCs emission.     

油松排放萜烯类化合物浓度的日变化及排放速率的研究

 采用封闭式采样和气相色谱法分析监测了北京主要树种油松排放的萜烯类化合物，其中包括α和β蒎烯、蒈烯、松油烯、柠檬烯和罗勒烯，以及少量异戊二烯。松油烯、B蒎烯、柠檬烯和蒈烯的排放量之和占油松排放碳氢总量的94％以上。萜烯和异戌二烯排放速率随日照和温度的升高而增加。萜烯等浓度的日变化表明在正午和午夜油松有两个排放高峰。在日均气温为18℃时油松的碳氢化合物平均总排放速率约为8.7μh/h.g。     

Numerical model to quantify biogenic volatile organic compound emissions: The Pearl River Delta region as a case study

This article compiles the actual knowledge of the biogenic volatile organic compound (BVOC) emissions estimated using model methods in the Pearl River Delta (PRD) region, one of the most developed regions in China. The developed history of BVOC emission models is presented briefly and three typical emission models are introduced and compared. The results from local studies related to BVOC emissions have been summarized. Based on this analysis, it is recommended that local researchers conduct BVOC emission studies systematically, from the assessment of model inputs, to compiling regional emission inventories to quantifying the uncertainties and evaluating the model results. Beyond that, more basic researches should be conducted in the future to close the gaps in knowledge on BVOC emission mechanisms, to develop the emission models and to refine the inventory results. This paper can provide a perspective on these aspects in the broad field of research associated with BVOC emissions in the PRD region.     

Regulated emission characteristics of in-use LNG and diesel semi-trailer towing vehicles under real driving conditions using PEMS

On-road driving emissions of six liquefied natural gas(LNG) and diesel semi-trailer towing vehicles(STTVs) which met China Emission Standard IV and V were tested using Portable Emission Measurement System(PEMS) in northern China.Emission characteristics of these vehicles under real driving conditions were analyzed and proved that on-road emissions of heavy-duty vehicles(HDVs) were underestimated in the past.There were large differences among LNG and diesel vehicles, which also existed between China V vehicles and China IV vehicles.Emission factors showed the highest level under real driving conditions, which probably be caused by frequent acceleration, deceleration, and start-stop.NOx emission factors ranged from 2.855 to 20.939 g/km based on distance-traveled and 6.719–90.557 g/kg based on fuel consumption during whole tests, which were much higher than previous researches on chassis dynamometer.It was inferred from tests that the fuel consumption rate of the test vehicles had a strong correlation with NOx emission, and the exhaust temperature also affected the efficiency of Selected Catalytic Reduction(SCR) aftertreatment system, thus changing the NOx emission greatly.THC emission factors of LNG vehicles were 2.012–10.636 g/km, which were much higher than that of diesel vehicles(0.029–0.185 g/km).Unburned CH_4 may be an important reason for this phenomenon.Further on-road emission tests, especially CH_4 emission test should be carried out in subsequent research.In addition, the Particulate Number(PN) emission factors of diesel vehicles were at a very high level during whole tests, and Diesel Particulate Filter(DPF)should be installed to reduce PN emission.     

电子受体类型对聚磷污泥胞外聚合物的影响研究

采用3种电子受体(硝氮、亚硝氮、氧),在SBR反应器中分别驯化了具有稳定除磷能力的聚磷污泥。对比研究了不同聚磷污泥胞外聚合物(EPS)的组分与含量,结合三维荧光光谱对EPS中有机物质进行分析。研究表明,以硝氮、亚硝氮为电子受体的聚磷污泥EPS平均浓度较为接近,分别为115.6mg/gVSS、133.5 mg/gVSS,由厌氧段至缺氧段,EPS总浓度有所下降。以氧为电子受体聚磷污泥的EPS平均浓度相对较高,为194.5 mg/gVSS,由厌氧段至好氧段,EPS总浓度略有升高。不同聚磷污泥的EPS组分均以胞外蛋白为主,占EPS总量的53%~65%,多糖与核酸占EPS总量28%~34%、5%~7%。三维荧光光谱显示3种聚磷污泥EPS均具有芳香结构蛋白质、可溶性代谢物的荧光峰,另外,以硝氮为电子受体的聚磷污泥还具有明显的腐殖酸类物质的荧光峰。研究结果表明电子受体对聚磷污泥EPS的组分、浓度、有机质类别有一定的影响。