环境影响评价中公众参与的机制与有效性

公众参与是环境影响评价中的重要内容。从公众参与的定义、目标和作用入手，就环境影响评价中公众参与的作用机制及其有效性进行探讨，认为：广泛的公众代表性、有效的公众参与形式以及公众意见的如实反映和客观分析，都是增进环境影响评价中公众参与的机制有效性的重要因素。     

对开发建设项目环境影响评价中公众参与内容的探讨

环境影响评价中公众参与的内容应与建设项目的生产性质、污染状况相适应。不同类型的开发建设项目开展的公众参与内容是不同的。对项目公众参与的组织形式及内容进行了探讨，便于指导建设项目的环境影响评价工作。     

建立我国战略环境评价理论与方法体系

战略环境评价是环境影响评价在战略层次上的应用，是具体落实可持续发展战略的重要工具。在分析其现实意义的基础上，提出我国战略环境评价理论与方法体系的主要研究内容，就建立我国战略环境评价理论与方法提出建议。     

Baseline levels of PCDD/Fs in soil and herbage samples collected in the vicinity of a new hazardous waste incinerator in Catalonia,Spain

The construction in Constantí (Catalonia, Spain) of a new hazardous waste incinerator (HWI), which is the first one in Spain, finished in 1999. In order to determine the temporal variation (1996–1998) in the concentrations of polychlorinated dibenzo-p-dioxins (PCDDs) and dibenzofurans (PCDFs) in the vicinity of the new HWI, 40 soil and 40 herbage samples were collected (1998) at the same sampling points in which samples had been taken two years before (1996). Each sample was analyzed for PCDDs and PCDFs by high resolution gas chromatography/high resolution mass spectrometry. In the 1996 survey, PCDD/F concentrations in soils ranged from 0.13 to 24.20 ng I-TEQ/kg (d.m.), with median and mean values of 0.67 and 1.68 ng I-TEQ/kg (d.m.), respectively. In the present study, PCDD/F concentrations ranged from 0.12 to 17.20 ng I-TEQ/kg (d.m.), with a median value of 0.75 ng I-TEQ/kg (d.m.) and a mean value of 1.59 ng I-TEQ/kg (d.m.). In turn, in the present study PCDD/F concentrations in vegetation ranged from 0.14 to 2.01 ng I-TEQ/kg (d.m.) (median and mean values: 0.23 and 0.31 ng I-TEQ/kg, respectively), while in the 1996 survey PCDD/F concentrations ranged from 0.24 to 1.22 ng I-TEQ/kg (d.m.) (median and mean values: 0.53 and 0.61 ng I-TEQ/kg, respectively). According to the present (1998) and the previous (1996) levels of PCDD/Fs found in soils and vegetation, the area under potential influence of the new facility shows a rather low contamination by these compounds. The current results should be useful to establish the environmental impact of the HWI.     

Assessment of popular techniques for co-processing municipal solid waste in Chinese cement kilns

• Municipal solid waste (MSW) was fermented, screened, gasified, then co-processed. • Co-processing MSW in cement kilns could cause excessive pollutant emissions. • Bypass flue gas can be disposed of through the main flue system. • Popular MSW co-processing methods do not affect cement quality. Cement kiln co-processing techniques have been developed in the past 20 years in China, and more than 60 factories now use fermentation, screening, and gasification pre-treatment techniques to co-process municipal solid waste (MSW). There three complete MSW pre-treatment techniques, co-processing procedures, and environmental risk assessments have been described in few publications. In this study, we assessed the effectiveness of each technique. The results suggested that the pollutant content released by each pre-treatment technology was lower than the emission standard. To reveal the mechanisms of pollutant migration and enrichment, the substances in the kiln and kiln products are investigated. The input of co-processing materials (Co-M) produced by fermentation caused formation of polychlorinated dibenzo-p-dioxins and dibenzofuran (PCDD/Fs) in the bypass flue gas (By-gas) in excess of the regulatory standard. The Co-M input produced by the screening and gasifier technologies caused the total organic carbon (TOC) concentration to exceed the standard. In addition, the NO_x, TOC, and PCDD/Fs in the By-gas exceeded the regulatory standard. Raw meal was the primary chlorine and heavy metals input stream, and clinker (CK) and cement kiln dust (CKD) accounted for>90% of the total chlorine output stream. Flue gas and CKD were the primary volatile heavy metal (Hg) output streams. Greater than 70% of the semi-volatile heavy metals (Cd, Pb, Tl and Se) distributed in hot raw meal and bypass cement kiln dust. The low-volatility heavy metals were concentrated in the CK. These results indicated that co-processing techniques used in China still require improvement.     

化工园区地下水环境状况调查监测布点研究

借鉴环境风险源目标管理的理念,按照“分区、分类、分级”监测的原则,建立了化工园区地下水环境状况调查监测布点方法体系,并以某化工园区为示例展开应用研究。结果显示,该方法能对化工园区不同区域、不同类型、不同级别的地下水污染源构建差异化监测网络,解决化工园区地下水污染多元化监测布点问题,可为化工园区地下水环境状况调查监测布点方案的拟定或优化调整提供工作参考。     

关于工业园区突发环境事件应急管理体系的思考

工业园区内企业集聚,导致环境风险隐患增加,加强对工业园区突发环境事件的应急管理尤为重要。在综合分析国内外环境应急管理体系现状的基础上,结合实际工作中发现的问题,从工业园区内风险物质的识别、环境应急资源共享、环境应急监测、环境应急管理体系的闭环管理模式、环境应急联动系统建设等5个方面,提出了一些关于建立和完善工业园区突发环境事件应急管理体系的建议。     

苏州储备地块土壤污染防治项目监理模式的实践与探讨

阐述了我国土壤污染防治项目监理现状,以苏州储备地块为例,分析了其土壤污染防治项目以环境监理为主,以工程监理为辅,由环境检测单位提供独立监测服务的监理模式的实践特点,以及环境监理、工程监理和环境监测各环节的实施要点。在此基础上,提出了在土壤污染防治项目实施过程中落实监理全覆盖,夯实监理的安全监管责任,以及将环境监理与工程监理有机结合,形成一套有针对性的行业监理规范等建议。     

扬尘污染精细化管控思路探讨

通过分析传统扬尘污染防治模式的弊端,提出了一种“精准监测、排量切入、总量考核、职责共担”的新模式。该模式在技术手段上使用以扬尘在线监测数据为基准的扬尘排放量计算模式,以及基于机器学习的扬尘源排放量计算方法,实现了扬尘排放量的自动、实时、在线计算;在管理手段上将传统的扬尘浓度点控制转变为易扬尘单位扬尘排量控制,通过总量控制、指标分解,增强了政府与企业对于环境效益的职责分工,有助于将扬尘防控责任有效落实,实现对扬尘污染的精细化、常态化管控。     

高效液相色谱串联质谱法直接测定环境水样中8种有机磷农药

建立了一种高效液相色谱-串联质谱法（LC-MS/MS）同时测定环境水样中8种有机磷农药的分析方法。以地表水、地下水、污水和废水样品作为代表性水样基底,前处理方法仅采用简单的滤膜过滤,在C₁₈柱分离后,在多反应监测模式下进行分析检测。结果表明,敌百虫、毒死蜱等有机磷农药在样品保存过程中迅速发生降解,分析须在样本采集后1 d内完成;该方法的检出限为0.10~0.20 μg/L,线性拟合相关系数（r）均>0.995;不同基底、不同浓度的加标回收实验表明,8种有机磷农药在环境基底中的回收率为74.5%~118%,相对标准偏差为0.4%~8.6%。该方法操作简便、灵敏度高、准确性好,在未来环境监测工作中具有较好的应用前景。