固相萃取-超高效液相色谱/三重四极杆质谱法同时测定地表水中8种亚硝胺类化合物

建立了固相萃取（SPE）-超高效液相色谱/三重四极杆串联质谱（UPLC-MS/MS）同时测定地表水中8种亚硝胺类化合物的方法。水样中目标物经椰壳活性炭固相萃取小柱吸附富集,小柱经氮气吹干后采用二氯甲烷洗脱。待测样品采用Atlantis T₃柱,以水-甲醇作为流动相进行梯度洗脱,大气压力化学电离源（APCI）正离子模式多反应监测方式（MRM）进行检测,内标法定量分析。8种目标物在相关线性范围内线性良好(r≥0.9950),地表水加标回收率为55.4%~90.4%,相对标准偏差为3.1%~14.3%,方法检出限为1.1 ~1.8 ng/L。本方法准确度和灵敏度高,适用于快速测定地表水中8种亚硝胺类化合物含量。     

某基岩区工业固体废物填埋场地递进式场地环境调查实例

针对某基岩区简易封场后的固体废物填埋场,采用多层次、递进式调查策略,配合使用地球物理探测、直压式土壤快速取样、现场快速检测等技术,分3个阶段开展填埋场及其周边环境调查。第1阶段,调查地质环境特征,开展地球物理探测;第2阶段,调查填埋物、渗滤液主要组分及对周边积水、农田土壤、民用井水的污染情况;第3阶段,划定重点污染区域,开展土壤和地下水污染调查。调查结果显示,填埋区已发生明显渗漏,对邻近区域土壤、地下水及地表积水造成了一定污染,但未对周边农用地土壤、民用井水质等产生不利影响,总体处于可控范围。提出,通过削减污染源,切断污染物迁移、暴露途径,消除已有污染影响,长期跟踪监测等多项管控治理措施进行综合整治。     

注入式低温等离子体技术用于卷烟厂异味处理的效果研究

将注入式低温等离子体技术应用于烟厂制丝排潮和制丝除尘排放气体异味处理中,研究了注入式低温等离子体发生器参数对臭味浓度、非甲烷总烃和可检出典型有机物去除率的影响规律。结果表明:注入式低温等离子体发生器工作电压越高,注入处理烟道的氧化活性物种浓度越高,注入量越大,臭味浓度、非甲烷总烃和可检出典型有机物去除率也越高。选取合理的工作电压,臭味浓度去除率可达90%以上,非甲烷总烃去除率分别达到了83.8%(制丝排潮)和78.1%(制丝除尘)。     

The inhibitory combustion reaction performance and tail gas analysis of composite ultra-fine dry powder extinguishing agent containing different additives

For lack of an extinguishing agent with high-efficiency, non-toxic and environmentally friendly, a new type of extinguishing agent was fabricated to solve such an urgent problem. In this study, the zinc borate (ZB) and ferrocene (Fe(Cp)₂) were utilized as two additives for extinguishants to suppress combustion reaction and the toxicity of the tail gas was detected. The mass fraction of ZB corresponding to the optimal inhibitory effect was determined to be 0.5–1.5%, by contrast, the optimum interval of Fe(Cp)₂ was detected as 0.5–1.0%. Similarly, with the increasing proportion of the two additives, the homologous inhibitory action was gradually weakened. From the perspective of thermogravimetric analysis (TGA), it was indicated that the ZB accelerated the pyrolysis process of the extinguishant, making its thermal decomposition process more thoroughly. Meanwhile, the differential scanning calorimetry (DSC) demonstrated that the decomposition efficiency was markedly improved when the amount of ZB was maintained at 0.5–1.5%. Besides, the tail gas tests were implemented to assess the extent of toxic and harmful properties. In terms of the carbon monoxide (CO) and carbon dioxide (CO₂) generated, once the mass fraction of ZB and Fe(Cp)₂ was less than 1.5% and 1.0% respectively, the concentration of CO and CO₂ was distinctly lower than that without additives. Moreover, the inhibitory ability on nitrogen oxides (NOx) was enhanced when the mass fraction of the two additives was kept below 1.0%. The results confirmed that a more practical extinguishant was proposed and it can provide guidance for the application and development of extinguishants.     

Catalytic oxidation of CO over Pt/Fe3O4 catalysts: Tuning O2 activation and CO adsorption

• Strong metal-support interaction exists on Pt/Fe₃O₄ catalysts. • Pt metal particles facilitate the formation of oxygen vacancies on Fe₃O₄. • Fe₃O₄ supports enhance the strength of CO adsorption on Pt metal particles. The self-inhibition behavior due to CO poisoning on Pt metal particles strongly impairs the performance of CO oxidation. It is an effective method to use reducible metal oxides for supporting Pt metal particles to avoid self-inhibition and to improve catalytic performance. In this work, we used in situ reductions of chloroplatinic acid on commercial Fe₃O₄ powder to prepare heterogeneous-structured Pt/Fe₃O₄ catalysts in the solution of ethylene glycol. The heterogeneous Pt/Fe₃O₄ catalysts achieved a better catalytic performance of CO oxidation compared with the Fe₃O₄ powder. The temperatures of 50% and 90% CO conversion were achieved above 260°C and 290°C at Pt/Fe₃O₄, respectively. However, they are accomplished on Fe₃O₄ at temperatures higher than 310°C. XRD, XPS, and H₂-TPR results confirmed that the metallic Pt atoms have a strong synergistic interaction with the Fe₃O₄ supports. TGA results and transient DRIFTS results proved that the Pt metal particles facilitate the release of lattice oxygen and the formation of oxygen vacancies on Fe₃O₄. The combined results of O₂-TPD and DRIFTS indicated that the activation step of oxygen molecules at surface oxygen vacancies could potentially be the rate-determining step of the catalytic CO oxidation at Pt/Fe₃O₄ catalysts. The reaction pathway involves a Pt-assisted Mars-van Krevelen (MvK) mechanism.     

Locally enhanced electric field treatment (LEEFT) for water disinfection

• Nanowire-assisted LEEFT is applied for water disinfection with low voltages. • LEEFT inactivates bacteria by disrupting cell membrane through electroporation. • Multiple electrodes and device configurations have been developed for LEEFT. • The LEEFT is low-cost, highly efficient, and produces no DBPs. • The LEEFT can potentially be applicable for water disinfection at all scales. Water disinfection is a critical step in water and wastewater treatment. The most widely used chlorination suffers from the formation of carcinogenic disinfection by-products (DBPs) while alternative methods (e.g., UV, O₃, and membrane filtration) are limited by microbial regrowth, no residual disinfectant, and high operation cost. Here, a nanowire-enabled disinfection method, locally enhanced electric field treatment (LEEFT), is introduced with advantages of no chemical addition, no DBP formation, low energy consumption, and efficient microbial inactivation. Attributed to the lightning rod effect, the electric field near the tip area of the nanowires on the electrode is significantly enhanced to inactivate microbes, even though a small external voltage (usually<5 V) is applied. In this review, after emphasizing the significance of water disinfection, the theory of the LEEFT is explained. Subsequently, the recent development of the LEEFT technology on electrode materials and device configurations are summarized. The disinfection performance is analyzed, with respect to the operating parameters, universality against different microorganisms, electrode durability, and energy consumption. The studies on the inactivation mechanisms during the LEEFT are also reviewed. Lastly, the challenges and future research of LEEFT disinfection are discussed.     

振荡辐射下PMMA 热解与着火过程研究

采用正弦波变化振荡的辐射热流,对热厚PMMA(聚甲基丙烯酸甲酯)的热解和着火过程进行研究,同时采用数值模拟,对实验结果进行验证和补充。结果表明,表面温度和深度温度随着时间而增加,温度由于周期性的辐射而发生振荡,而振荡幅度随着深度的增加而衰减;表面温度与深度温度振荡存在时间延迟;着火时间随着热流振荡周期的增大而减小,主要由于平均热流密度随着周期增大而增大。     

江苏省太湖流域水生态健康评估的初步实践及展望

阐述了水生态健康的内涵与意义,从江苏省率先在太湖流域开展水生态环境功能分区管理的顶层设计,构建以水生态健康指标为核心的水生态健康评估技术体系,地方对照水生态环境功能区划的水生态分级管控目标开展的应用与实践结果等3个方面,回顾了江苏省太湖流域水生态健康评估工作的主要进展,提出了完善水生态健康评估技术体系和推进流域水生态健康评估工作的建议。     

宜兴市环保产业供给侧改革的启示与建议

当前我国环保产业普遍存在着企业规模较小、缺乏核心技术、中低端供给过剩、优质供给不足等现象,环保产业的供给侧水平明显无法满足日益提高的环境治理需求。以全国最大的环保产业基地宜兴市为例,分析上述问题特质及产生原因,总结政府及企业改革创新中的经验和不足,提出环保产业供给侧改革的参考对策与建议。     

新形势下环境质量综合分析思路探讨

随着中国共产党第十九次全国代表大会的顺利召开,环保"大部制"改革、环境监测垂直管理制度改革以及国家"大气十条""水十条""土十条"的全面实施均对生态环境保护、环境监测乃至环境质量综合分析工作提出了新要求。新形势下,环境质量综合分析应与时俱进、开拓创新,进一步优化工作机制,加强系统分析,增强综合分析报告的科学性、规范性、时效性、精准性、客观性等,强化技术与能力支撑,更好发挥环境监测对环境管理和决策的引领作用。