燃烧后CO2气体捕集技术研究

从燃煤电厂排出的烟气分离技术,分为即燃烧前处理、富氧燃烧以及燃烧后处理三类,阐述燃烧后的处理方法.这种方法有五大技术发展方向,包括吸收、吸附、膜分离、霜冻分离和生物捕捉.对这五个方向的技术做一些阐述,并列举这几个方向下正在开展的研究实例,对二氧化碳捕集技术做一个较全面的介绍.     

Fe_3O_4@SiO_2/TiO_2核壳结构纳米颗粒降解TNT溶液

针对TNT炸药废水具有成分复杂、排放量大、有毒等特点,立足于炸药废水在排放前的降解处理,研究开发一种基于核壳结构Fe3O4@SiO2/TiO2纳米颗粒的高效、可控回收、无二次污染且成本低的光催化降解方法。利用高温碳还原法和溶胶凝胶法制备了具有核壳结构的Fe3O4@SiO2/TiO2纳米颗粒。XRD分析表明,内核Fe3O4呈现磁铁矿特征,表面覆盖的纳米TiO2为锐钛矿型。磁滞回线测试结果显示,复合颗粒的饱和磁化强度为46.5 emu/g,N2吸附-解吸分析结果表明,该颗粒具有典型的介孔结构。使用Fe3O4@SiO2/TiO2纳米颗粒在紫外光下对含TNT废水进行降解,降解率达到81.9%,且颗粒的回收率达到88.4%,为实现高效、可控回收、无二次污染光催化-吸附降解TNT奠定了基础。     

Removal of phenolic estrogen pollutants from different sources of water using molecularly imprinted polymeric microspheres

The efficiency and effects of using Bisphenol A-molecularly imprinted polymeric microspheres (MIPMs) to remove phenolic estrogens from different sources of water were evaluated. MIPMs prepared by precipitation polymerization removed a group of phenolic estrogens from different kinds of water selectively and effectively. The highest removal efficiency was observed at pH=5. Fifty millimoles per litre ions or 10mg/L humid acid improved removal efficiency. MIPMs were more suitable to remove trace estrogens in large volume than high concentration of estrogens in small volume. The removal efficiency of spiked tap water, lake water and river water were better than that of distilled water. Hundred milligrams of MIPMs had higher removal selectivity and efficiency than those of 100mg or 300mg activated carbons. Moreover, MIPMs can be re-used for at least 30 times without losing any removal efficiency. MIPMs provided a selective, simple, reliable and practicable solution to remove trace phenolic estrogens from different sources of water.     

蒸汽抑制熄灭酒精池火有效性的模拟实验研究

蒸汽灭火系统在酒类作业场所有着广阔的应用前景.通过全淹没和局部保护实验对蒸汽抑制熄灭酒精池火的有效性进行了研究.实验结果表明,全淹方式难以有效控火,但是布局合理的局部保护方式能够有效熄灭酒精池火.蒸汽灭火过程中稀释O2浓度的灭火机理起到的作用较小,蒸汽的火焰拉伸效果是其主导灭火机理.     

Preconcentration technique for the determination of trace elements in natural water samples by ICP-AES

A procedure was developed for the determination of Cd, Cu, Zn, Co, Ni, Mn, Pb and Mo in water samples by inductively coupled plasma atomic emission spectrometry (ICP-AES) after preconcentration on a morpholine dithiocarbamate (mor-DTC) supported by bagasse (Saccharam aphisinaram). The sorbed elements were subsequently eluted with 4,M HNO₃ and the acid eluates were analysed by ICP–AES. The influence of various parameters such as pH, flow rate of sample, eluent concentration, volume of the sample and volume of eluent were investigated to enhance the sensitivity of the present method. A 20,mL disposable syringe served as preconcentration column. Under the optimal conditions Cd, Cu, Zn, Co, Ni, Mn, Pb and Mo in aqueous sample was concentrated about 100-fold. The sorption recoveries of elements were higher than 99.6%. The method is also applied for the analysis of natural and spiked water samples.     

流动注射在线离子交换微柱富集-火焰原子吸收法测定环境样品中的铜、铅和镉

本文用流动注射在线阳离子交换树脂预富集-火焰原子吸收法测定了标准参考物(头发GBW09 101和桃叶GBW08501)及水样中的微量铜、铅和镉.对铜、铅和镉测定灵敏度分别提高27.0 ,37.5和27.5倍;回收率分别为93.7-109.9%,88.9-101.4%,84.7-103.0% ;分析速度为30次·h-1.对0.05μg·ml-1Cu2+,0.2μg·ml-1 Pb2+,0.02μg·ml-1Cd2+溶液,其测定相对标准偏差(n ＝11)分别为2.74%,1.05%和2.97%.     

火电厂烟气脱硫装置吸收塔倒装工艺

吸收塔是火电厂烟气脱硫装置中的关键设备,以铜陵电厂2×1 000MW机组烟气脱硫装置吸收塔安装为例,介绍了吸收塔倒装工艺及其特点。由于倒装法在降低费用、缩短工期、减少高空作业量、不受场地限制等方面具有显著的优点,因而在吸收塔的施工技术中被广泛采用。     

膜吸收法净化低浓度甲醛和氨气

基于膜吸收技术自制双层平板式膜吸收器,搭建净化低浓度甲醛和氨气污染模拟系统,考察不同膜结构参数、进气流量、吸收剂流量等因素对其净化效果的影响。结果表明,聚偏氟乙烯PVDF对低浓度甲醛和氨气的净化效率高于聚四氟乙烯PTFE。对同一材质膜,随着膜孔隙率的增大,甲醛和氨气的净化率呈上升趋势。随着进气流量的增加。甲醛和氨气的净化效率降低;而吸收剂流量对其净化效率影响不大。对于所有实验条件,平均膜孔径为0．22μm的PVDF4#在进气流量ug=120L／h时,甲醛和氨气的净化效率最高,分别达94．7％和96．3％。     

全自动石墨消解原子吸收法测定土壤中的Pb

建立了用硝酸-氢氟酸-高氯酸体系全自动石墨原子吸收分光光度法测定土壤中的Pb的分析方法.土壤中Pb的检出限可达0.07 mg/kg,线性相关系数为0.9998,加标回收率为92.8％～98.4％.所建立的方法安全、快速、简单、灵敏度高、重现性好,是同时大批量分析土壤中Pb含量的可靠高效方法.     

Application of multiwalled carbon nanotubes treated by potassium permanganate for determination of trace cadmium prior to flame atomic absorption spectrometry

In this study we investigated the enrichment ability of oxidized multiwalled carbon nanotubes (MWCNTs) and established a new method for the determination of trace cadmium in environment with flame atomic absorption spectrometry.The MWCNTs were oxidized by potassium permanganate under appropriate conditions before use as preconcentration packing.Parameters influencing the recoveries of target analytes were optimized.Under optimal conditions,the target analyte exhibited a good linearity (R~2=0.9992) over the concentration range 0.5-50 ng/ml.The detection limit and precision of the proposed method were 0.15 ng/ml and 2.06%, respectively.The proposed method was applied to the determination of cadmium in real-world environmental samples and the recoveries were in the range of 91.3%-108.0%.All these experimental results indicated that this new procedure could be applied to the determination of trace cadmium in environmental waters.