Flow analysis of PCDD/Fs for Tarragona Province, Spain

The present study was intended to establish an inventory of PCDD/F emissions in Tarragona Province (Catalonia, NE Spain), as a preliminary phase in the development of a flow analysis of PCDD/Fs in this Province. In 1999, global PCDD/F emissions reached a value of 2.24 g I-TEQ/y, which means a density of 3.8 micrograms I-TEQ/inhabitant/y. The low amount of PCDD/Fs emitted to air by the only municipal solid waste incinerator in the Province (approximately 0.04% of the total) has been one of the most notable results. As a reflection of uncertainties in the estimates for individual sources, the 90th percentiles of PCDD/F releases for 1999 ranged up to 4.1 g I-TEQ/y.     

工业废水中微量镍的流动注射光度分析

采用流动注射分析技术,在柠檬酸,碘存在的氨性介质中,以丁二酮肟为显色剂,应用光度自动分析方法,测定废水中微量镍,检出限为0.3mg·l~(-1);线性范围为0.3～10mg·l~(-1);相对标准偏差<1％。     

流动注射催化光度分析法的研究进展

综述了近年来流动注射催化光度分析法的研究进展，包括环境水样中金属离子、阴离子、有机物等污染物的测定，展望了流动注射催化光度分析法未来的研究方向和发展前景。     

废塑料在炼铁工艺中的应用

介绍了废塑料的处理和利用方法 ,叙述了高炉喷吹废塑料的工艺、优点和国外的实际应用。通过比较 ,认为在高炉中应用废塑料作还原剂能带来较好的社会效益和经济效益 ,指出随着喷吹技术的不断完善 ,高炉喷吹废塑料在我国具有广阔的应用前景     

环保注水--油田污水治理的新途径

介绍了油田污水排放现状、特征及处理难点，定义了环保注水新概念。重点介绍了环保注水的特点、工艺流程、现场试验．探讨了油田污水治理、保护环境的新途径。     

流动注射在线萃取石墨炉原子吸收法测定芦荟中的铅

以APDC/MIBK为萃取系统 ,流动注射在线液 液萃取石墨炉原子吸收光谱法测定芦荟样品中痕量铅 ,对萃取条件 ,流路参数及共存组分的干扰等均进行了探讨。本法的测定精密度 (RSD)为 3 .74% ,检出限 (3σ)为 3 .2× 1 0 - 1 2 g ,加标回收率为 93 %～ 99%。测定结果令人满意。     

流动注射-荧光熄灭法测定水中的铜

采用单通道流动注射 -新试铜灵荧光熄灭法测定水环境中重金属离子Cu(Ⅱ )。在新试铜灵的浓度为 2 5×10 - 5mol L ,激发波长为 2 81nm ,发射波长为 419nm下 ,Cu(Ⅱ )浓度为 0 12 5～ 5mg L范围内 ,荧光强度与Cu(Ⅱ )浓度呈线性关系 ,检出限 0 0 76mg L ,进样速率 90次 min ,对 3mg L的Cu(Ⅱ ) 10次测定的相对标准偏差为 0 32 %～ 2 97% ,河水和矿井水中加标回收率为 95 %～ 10 5 %。该方法选择性好 ,适合于水环境大批量样品中微量铜的快速测定     

在线分离富集FI分光光度法直接测定铜

本文针对ＡＡＳ法测定痕量铜时，大量铁存在表现干扰，研究并建立了流动注射（ＦＩ）在线螯合树脂分离富集光度法直接测定痕量铜的新方法，具有灵敏度高、选择性强；因此，已成功地用于水样中痕量铜的测定，该法在水质检验和环境监测中有一定的适用性．     

高效加压溶气气浮工艺在炼油污水处理中的应用

通过对传统溶气气浮工艺及高效加压溶气气浮工艺（SUPR-DAF）的工作原理、工艺流程、气浮效果、运行管理、技术经济等方面加以比较、分析，显示出SUPR-DAF工艺的高效性、灵活性、优越性。该工艺可适用于任何改建、扩建、新建的炼油污水处理项目。     

Sustainable three‐well pumping strategy for efficient detection monitoring near waste impoundments

Efficient monitoring systems addressing the difficulty of detecting narrow contaminant plumes originating from unknown point sources are needed for modern landfills. A low‐discharge extraction and accompanying injection wells could potentially address this problem. This hypothetical computer‐modeling study involved a three‐well detection system consisting of one extraction and two injection wells at a rectangular landfill in a shallow, unconfined aquifer. The extraction and injection wells were located near the landfill's downgradient and cross‐gradient corners, respectively. Each injection well pumped at half the rate of the extraction well. A minimum pumping rate of 1.1 cubic meters per day was determined for the three‐well system; at this rate, all contaminant plumes originating within the landfill's footprint entered the extraction well prior to reaching a downgradient property boundary. In comparison, five passive (not pumped) wells detected all contaminant releases from the landfill. Results of this study suggest that a low‐discharge extraction well with accompanying injection wells may be an effective contaminant detection strategy at some waste impoundments.