烟气同时脱硫脱硝技术进展研究

中国二氧化硫和氮氧化物的排放所引起的污染越来越严重,国家治理大气污染的力度逐步加大.现阶段单独脱硫脱硝的技术已经很成熟,考虑到经济高效的问题,烟气同时脱硫脱硝技术是当前烟气净化技术研究的热点之一.研究开发经济、高效、简单的烟气脱硫脱硝一体化技术十分必要和紧迫.本文介绍了几种典型烟气同时脱硫脱硝技术原理及其研究现状,分析了其原理及优缺点,对几种工艺进行了技术和经济分析.最后对脱硫脱硝一体化技术的发展前景作了展望.     

医疗废物高温蒸汽处理工艺的二次污染控制——以孝感市医疗废物处置中心为例

以孝感市医疗废物处置中心为例,介绍了高温蒸汽处理过程的二次污染控制工艺。结果表明:采用生物脱臭处理工艺,废气中的恶臭污染物可以达到《恶臭污染排放控制标准》(GB 14554—1993)相应排放速率限值要求;采用生化和物化相结合的废水处理工艺,出水水质可以满足《污水综合排放标准》(GB 8978—1996)的二级排放标准要求。     

基于云模型的页岩气开发环境影响评价

从大气环境、噪声与土壤环境、水环境和生态、安全与可持续4个方面构建页岩气开发环境影响指标体系,并建立基于熵权法和云模型评价法的页岩气环境影响评价模型。针对四川省某国家级页岩气示范区进行实证分析,结果表明:该地区页岩气开发环境影响处于中等程度。页岩气开发对水环境影响最大,其次是对大气环境的影响,再次是对噪声与土壤环境,对生态、安全与可持续方面影响相对最小。该模型的评价结果与页岩气开发环境影响现状相符,最后根据评价结果提出相关政策建议。     

Chlorothalonil binding to aquatic humic substances assessed from gas purge studies

Abstract

Fate of the fungicide chlorothalonil (TCIN) binding to dissolved organic acid fractions was quantified using gas‐purge desorption studies. Binding studies were conducted to measure the dissolved organic carbon partition constant (K_DOC) with aquatic fulvic and humic acid fractions purified from cranberry bog water. Desorption studies at DOC concentrations up to 50 mg L^‐1 resulted in mean log K_DOC values of 4.63 (s.d.=0.5, n=8) and 4.81 (s.d.=0.7, n=7) for fulvic and humic acids, respectively. These values deviated from reported K_OC (organic carbon) values by 0.5 to 1.5 orders of magnitude. The relationship between K_OC and K_DOC did not conform to accepted ratios of 10: 1 to 3: 1, although these studies were conducted with the strong hydrophobic fraction of DOC. Binding was rapid suggesting hydrophobic partitioning or weak Van Der Waals forces as binding mechanisms. The strong binding potential for TCIN to aquatic humic substances corresponds to increased solubility in the aqueous system. Sorption to DOC suggests a possible transport mechanism which may result in elevated concentrations of TCIN in cranberry bog systems.     

Application of chemometric analysis based on physicochemical and chromatographic data for the differentiation origin of plant protection products containing chlorpyrifos

The aim of this study was to investigate the similarities and dissimilarities between the pesticide samples in form of emulsifiable concentrates (EC) formulation containing chlorpyrifos as active ingredient coming from different sources (i.e., shops and wholesales) and also belonging to various series. The results obtained by the Headspace Gas Chromatography–Mass Spectrometry method and also some selected physicochemical properties of examined pesticides including pH, density, stability, active ingredient and water content in pesticides tested were compared using two chemometric methods. Applicability of simple cluster analysis and also principal component analysis of obtained data in differentiation of examined plant protection products coming from different sources was confirmed. It would be advantageous in the routine control of originality and also in the detection of counterfeit pesticides, respectively, among commercially available pesticides containing chlorpyrifos as an active ingredient.     

Consequence analysis of premixed flammable gas explosion occurring in pipe using a coupled fluid-structure-fracture approach

A coupled fluid-structure-fracture approach incorporating a high-efficiency detonation modeling algorithm was proposed to study the consequences of premixed flammable gas explosion occurring in pipe. A strain-rate-dependent failure criterion which is the vital prerequisite for accurate consequences prediction was derived based on the failure mechanism of materials at high strain rates and it was applied to account for the fracture of pipe. The simulated pressure time history and fracture patterns were validated against experimental results and good agreements were acquired. The interaction between detonation wave and pipe during crack extension, dynamic fracture processes of pipes with different initial flaws, venting features of detonation products and pressure profiles out of pipe were obtained and discussed in detail. The comparison with existing semi-empirical and CFD methods was performed and it is revealed that the deformation and fracture of pipe have obvious negative influences on the peak overpressure and the rate of pressure increase out of pipe. Because the energy absorption and dissipation due to structural deformation and fracture are well taken into account, the coupled fluid-structure-fracture method is expected to provide more rational consequences prediction and analysis results.     

High efficiency chlorine removal from polyvinyl chloride (PVC) pyrolysis with a gas–liquid fluidized bed reactor

In this research a gas–liquid fluidized bed reactor was developed for removing chlorine (Cl) from polyvinyl chloride (PVC) to favor its pyrolysis treatment. In order to efficiently remove Cl within a limited time before extensive generation of hydrocarbon products, the gas–liquid fluidized bed reactor was running at 280–320 °C, where hot N₂ was used as fluidizing gas to fluidize the molten polymer, letting the molten polymer contact well with N₂ to release Cl in form of HCl. Experimental results showed that dechlorination efficiency is mainly temperature dependent and 300 °C is a proper reaction temperature for efficient dechlorination within a limited time duration and for prevention of extensive pyrolysis; under this temperature 99.5% of Cl removal efficiency can be obtained within reaction time around 1 min after melting is completed as the flow rate of N₂ gas was set around 0.47–0.85 Nm³ kg^?1 for the molten PVC. Larger N₂ flow rate and additives in PVC would enhance HCl release but did not change the final dechlorination efficiency; and excessive N₂ flow rate should be avoided for prevention of polymer entrainment. HCl is emitted from PVC granules or scraps at the mean time they started to melt and the melting stage should be taken into consideration when design the gas–liquid fluidized bed reactor for dechlorination.     

Pyrolysis of waste tyres: A review

Approximately 1.5 billion tyres are produced each year which will eventually enter the waste stream representing a major potential waste and environmental problem. However, there is growing interest in pyrolysis as a technology to treat tyres to produce valuable oil, char and gas products. The most common reactors used are fixed-bed (batch), screw kiln, rotary kiln, vacuum and fluidised-bed. The key influence on the product yield, and gas and oil composition, is the type of reactor used which in turn determines the temperature and heating rate. Tyre pyrolysis oil is chemically very complex containing aliphatic, aromatic, hetero-atom and polar fractions. The fuel characteristics of the tyre oil shows that it is similar to a gas oil or light fuel oil and has been successfully combusted in test furnaces and engines. The main gases produced from the pyrolysis of waste tyres are H₂, C₁–C₄ hydrocarbons, CO₂, CO and H₂S. Upgrading tyre pyrolysis products to high value products has concentrated on char upgrading to higher quality carbon black and to activated carbon. The use of catalysts to upgrade the oil to a aromatic-rich chemical feedstock or the production of hydrogen from waste tyres has also been reported. Examples of commercial and semi-commercial scale tyre pyrolysis systems show that small scale batch reactors and continuous rotary kiln reactors have been developed to commercial scale.     

硅锰合金电炉烟气干法净化煤气回收的设计与分析

结合9000kVA硅锰合金电炉烟气净化,对干法烟气净化、煤气回收工艺中烟气参数的选取和控制、安全保证等问题进行了分析,并对其进行了技术经济性评价。     

GC × GC--A New Analytical Tool For Environmental Forensics

Comprehensive two-dimensional gas chromatography, GC 2 GC, is a new analytical tool with a tremendous capability to separate and identify organic compounds in complex environmental samples. GC 2 GC uses two different chromatography columns coupled serially by a modulator to produce a volatility by polarity separation and distribute compound peaks across a two-dimensional retention time plane. The two-dimensional separation produces an order of magnitude more resolved peaks than traditional GC methods. The grouping or ordering of the peaks in the GC 2 GC chromatogram facilitates the identification of unknown compounds and the comparison of complex environmental samples. When a mass spectrometer detector is used, each resolved GC 2 GC peak yields a single-component, interference-free mass spectrum that leads to accurate matching with mass spectral libraries. GC 2 GC examination of marine sediment extracts identified a wide variety of chemical contaminants including polychlorinated biphenyls, p -nonylphenol isomers, polycyclic aromatic hydrocarbons, benzotriazoles, and the alkane, cycloalkane, alkylbenzene, alkylnaphthalene, and biomarker fractions of petroleum. The two-dimensional GC 2 GC chromatogram image permits rapid screening of the sediment extracts for these and other unknown contaminants.