煤气洗涤废水的处理研究

本研究对特难处理的煤气洗涤废水，采用混凝──电化学氧化处理，可获得良好的处理效果．其ＣＯＤ、油、酚分别由１０３２２ｍｇ／Ｌ、１５０００ｍｇ／Ｌ、１５７０ｍｇ／Ｌ降至２８９ｍｇ／Ｌ、１００ｍｇ／Ｌ、０．５ｍｇ／Ｌ．去除率分别为９７．２％，９３．３％，９９．９７％．     

北京市发展CNG汽车的条件与前景分析

北京市汽车排放污染物贡献率已达到：HC73.5％，CO63．4％，NOx46％。用CNG代替汽油作汽车燃料，可使CO减少97％、HC减少72％、NOx减少39％、CO2减少24％、SO2减少90％。建立CNG加气站和CNG汽车改装这两个CNG应用关键问题在技术上、经济上都是可行的。北京市CNG燃料来源有保障。北京市车辆都比较适合使用CNG气体燃料。北京有很强的CNG汽车产业科技力量。对北京市当前发展CNG汽车产业提出了一些建议。     

蜂窝断面内循环三相生物流化床内流动状况的数值模拟

根据蜂窝断面内循环三相生物流化床内混合液的连续性方程、动量方程和能量方程,利用Fluent软件对反应器内的流动状况进行了数值模拟.采用Fluent的前处理软件Gambit完成流化床的三维模型,利用Fluent主程序解析计算,并利用后处理软件实现计算结果的显示.模拟计算结果获得了反应器内静压力、静压差的变化规律,得到了液体循环速度、气含率沿纵向及横断面的分布.     

一起钢质无缝气瓶爆炸事故技术分析

文章简要描述了一起消防气体灭火钢质气瓶爆炸事故,对爆炸气瓶进行了断口分析、金相试验和理化试验,并分析了事故的原因,提醒制造厂家规范制造工艺,对预防类似事故的发生具有一定的参考意义。     

毛细管气相色谱法分析1,3—丁二烯中炔烃杂质含量

介绍了一种毛细管毛相谱法测定１，３－丁烯中炔烃质含量的新试验方法，该方法以氮气为载气，采用氢火焰离子化检测器，样品经分离后，采用外标法定量，操作简便，准确。该方法还可用于１，３－丁二烯纯度分析 。     

利用燃气轮机回收工业尾气

火炬瓦斯放空问题一直是石化行业的一个重点研究课题。我们经过不断地摸索、探讨，开发了燃气轮机回收火炬瓦斯的技术。采用燃气轮机回收火炬瓦斯，是消灭火炬的手段之一。介绍了燃气轮机的原理、流程及效果，在推广使用方面具有实用性。     

Study of metabolites from the degradation of polycyclic aromatic hydrocarbons (PAHs) by bacterial consortium enriched from mangrove sediments

The PAH metabolites produced during degradation of fluorene, phenanthrene and pyrene by a bacterial consortium enriched from mangrove sediments were analyzed using the on-fiber silylation solid-phase microextraction (SPME) combining with gas chromatography–mass spectrometry (GC–MS) method. Seventeen metabolites at trace levels were identified in different PAH degradation cultures based on the full scan mass spectra. In fluorene degradation cultures, 1-, 2-, 3- and 9-hydroxyfluorene, fluorenone, and phthalic acid were detected. In phenanthrene and pyrene degradation cultures, various common metabolites such as phenanthrene and pyrene dihydrodiols, mono-hydroxy phenanthrene, dihydroxy pyrene, lactone and 4-hydroxyphenanthrene, methyl ester, and phthalic acid were found. The detection of various common and novel metabolites demonstrates that SPME combining with GC–MS is a quick and convenient method for identification as well as monitoring the real time changes of metabolite concentrations throughout the degradation processes. The knowledge of PAH metabolic pathways and kinetics within indigenous bacterial consortium enriched from mangrove sediments contributes to enhance the bioremediation efficiency of PAH in real environment.     

Influence of super-absorbent polymer on the growth rate of gas hydrate

The growth rate of hydrate and morphology of methane hydrate formation were studied in a visual pressure cell at 5.5 MPa. The gas hydrate formation was carried out (coal mine methane (CMM) + tetrahydrofuran (THF) + sodium dodecyl sulphate (SDS) + H₂O) with and without SAP. Experimental data on the hydrate growth rate and induction time were obtained for three different CMM samples. The influence of SAP on hydrate growth rate was determined. Results showed that after the addition of SAP, with the methane concentration increased in CMM, the induction time was reduced by 9 min, 10 min and 3 min, and the growth rate was shortened by 0.56 × 10⁻⁶/m³ min⁻¹, 0.53 × 10⁻⁶/m³ min⁻¹ and 1.42 × 10⁻⁶/m³ min⁻¹, respectively. This study could be useful for the recovery of methane from CMM by forming hydrate in the chemical and mining industry.     

Coupling effects of foam ceramics on the flame and shock wave of gas explosion

The coupling of gas explosion flame and shock wave is analyzed. In the gas explosion process, shock wave is affected by the flame directly, and shock wave also induces the flame. Inhibiting explosion can be achieved by the interference between the flame and shock wave propagation. If the coupling effects can be damaged, the adverse effects caused by the explosion should be mitigated and controlled. According to the structure characteristics of foam ceramics, the coupling effects mechanism of ceramic foam on gas explosion flame and shock wave is researched. When the explosion goes through the structure of foam ceramics, the flame can be quenched and the shock wave be attenuated. After the flame is quenched, the supply of precursor shock wave energy is cut off. Due to lack of energy supply, the destructive effects of blast wave will be reduced effectively. Coupling effects of the flame and shock wave can be damaged by the special structure of foam ceramics. Studies suggest that a certain function to represent the structure characteristics of foam ceramics must exist. For a certain material of foam ceramics, the sure porosity δ and the pore diameter d also can be get, which is the key to research and develop foam ceramic suppression technology of gas explosion.     

液化天然气储罐9％镍钢焊缝相控阵AUT工艺

9％镍钢液化天然气储罐制造安装过程中,焊缝检验通常用常规射线照相（RT）进行。本文研讨用相控阵半自动超声检测（AUT）取代射线照相的工艺制定及验证方法。要领分四步：首先带缺陷专用焊接试样的制备;然后相控阵AUT工艺的编制;其次在有已知缺陷的焊接试样上,对AUTT艺作“开放性”验证试验;最后在现场对整个数据采集系统作“封闭性”操作演示和验证评定试验。验证结果表明相控阵AUT取代RT可行可靠,能凸显AUT种种优势。