固相萃取-气质联机测定水中嗅味物质2-甲基异茨醇和土霉素

分别利用固相萃取剂XAD-2树脂和C18SEP柱富集,二氯甲烷洗脱,固相萃取装置浓缩,通过气质联机(GC/MS)测定了水中土霉化合物MIB和Geosmin。该方法重现性好,相对标准偏差5.4%~7.0%,回收率80%~92%,MIB和Geosmin检出限分别为5ng/L和2ng/L。两种固相萃取剂对MIB和Geosmin吸附效率相当,吸附效率不受嗅味物质浓度影响,但当水溶液中其它有机质增多时,C18SPE的回收率明显下降。利用该方法对不同培养时间的放线菌代谢产物进行了测定,培养25天后代谢产物MIB和Geosmin的浓度达到200ng/L和130ng/L。     

高效液相色谱法测定饮用水中的微囊藻毒素RR和LR

利用高效液相色谱法(HPLC)测定了藻毒素(MC-RR、LR)标准样品,并绘制了标准曲线,藻毒素浓度在0~5mg/L范围内,HPLC峰面积与藻毒素进样量呈线性关系,RR和LR相关系数分别为0·9986和0·9992,表明该方法可靠、灵敏度较高。对毒素的富集方法及分析条件进行了优化,并在藻类高发期的7~10月份,通过固相萃取(SPE)法对T市饮用水中的MCs进行浓缩富集后,用高效液相色谱仪和标准曲线测出MC-RR和MC-LR值。结果显示,T市高藻期饮用水中含有MCs,应引起足够的重视。     

气相色谱-质谱法测定废酸油渣中的16种多环芳烃

建立了废酸油渣中16种多环芳烃超声萃取、Florisil萃取柱净化、气相色谱-质谱测定的方法。笔者对提取方式、提取剂类型和体积、提取时间和次数、净化方式等进行研究,采用无水硫酸钠分散,二氯甲烷作为提取剂超声40 min,提取液经纯水清洗、离心后取适量有机相经过3 g Florisil萃取柱净化,采用气相色谱-质谱选择离子模式(SIM),加入内标进行定量分析。结果表明:二氯甲烷提取效率比正己烷好,丙酮可能引起酸性样品中多环芳烃的降解,丙酮超声萃取时加入无水硫酸钠能在一定程度上防止目标物降解,但萃取效率不可控制,宜采用二氯甲烷作为萃取剂。分散提取能有效减少提取时间,超声清洗仪超声40 min提取效率为86.2%～104%。3g Florisil萃取柱净化比1 g Florisil萃取柱净化和GPC净化效果略好。方法检出限为0.4～1.3 mg/kg,6次空白加标的相对标准偏差为2.3%～15.3%,6个实际样品测定结果的相对标准偏差为1.2%～27.3%,基体加标回收率为51.3%～126%,连续校准稳定。该方法适用于废酸油渣样品中16种多环芳烃的检测,比直接溶解有效,比加速溶剂萃取、索氏提取、微波萃取和超声探头萃取简单、快捷,能有效减少设备污染和腐蚀,净化方法有效,测定结果准确可靠,是实现大批量样品检测的可行方法。     

博斯腾湖富营养化状态水平调查

通过水质特征和生物学特征的一个水文年规范化实地调查,采用Scirgesew参数分类标准和相关加权综合营养状态指数,对博斯腾湖水体富营养化状态水平进行了调查和评价。     

灰色系统模型GM（1,1）在大气环境浓度预测中的应用

运用灰色系统理论，结合实例详细介绍了ＧＭ（１，１）模型在大气环境浓度预测中的应用。     

浅谈GAM与GM（1,1）模型

对ＧＡＭ水环境预测模型提出了四点不同看法，与有关作者商榷，指出ＧＭ（１，１）模型与ＧＡＭ模型二者并无优劣之差，精度亦相当。     

气相色谱法测定蔬菜中菊酯类农药

以等量混合的丙酮和石油醚为提取剂,石英毛细管色谱柱分离,电子捕获检测器检测的气相色谱法测定蔬菜中氯氰菊酯、氰戊菊酯、溴氰菊酯农药残留。以保留时间定性,外标法定量,3种菊酯农药的检测限分别为0.013mg/kg、0.010mg/kg、0.035mg/kg,相对标准差均<7%,加标回收率在75%～87%之间。该法较简便,满足了蔬菜食用安全性的鉴别要求。     

乌鲁木齐市新市区大气气溶胶中多环芳烃的GC/MS分析

采用气相色谱-质谱联用技术(GC/MS)分析测定了乌鲁木齐市新市区的大气气溶胶样品16种EPA优控多环芳烃(PAHs)的含量。通过索氏提取气溶胶样品,抽提物经硅胶层析柱分离,使用16种多环芳烃混合标准样品绘制标准曲线,以外标法对PAHs进行定量分析,并根据所得数据浅析了多环芳烃污染来源。结果表明,乌鲁木齐市新市区大气中由于汽车尾气排放和煤的燃烧造成的多环芳烃污染均存在。     

Application of CFD Methods for Modelling in Air Pollution Problems: Possibilities and Gaps

Different urban air pollution problems deal with complex structure of air flows and turbulence. For such problems the Computer Fluid Dynamics (CFD) methods become widely used. However, this approach despite a number of advantages has some problems. Experience of use of CFD tools for development of models and suggestions of their applications for a local scale air pollution over a complex terrain and stable stratification are discussed in this paper, including: Topography and complex geometry: choose of the co-ordinate system and computer grid; Turbulence closure for air pollution modelling: modified k- model for stable stratified ABL; Boundary conditions for vertical profiles of velocity for stable-stratified atmosphere; Effects of the radiation and thermal budget of inclined surfaces to dispersion of pollutants; Artificial sources of air dynamics and circulation.Some examples of CFD applications for air pollution modelling for a flat terrain, mountainous area, mining open cast and indoor ventilation are discussed. Modified k- model for stably-stratified ABL is suggested. Due to the isotropic character of the k- model a combination of it in vertical with the sub-grid turbulence closure in horizontal can be more suitable for ABL. An effective scheme of boundary conditions for velocity profiles, based on the developed similarity theory for stable-stratified ABL, is suggested. Alongside with the common studies of atmospheric dispersion, the CFD methods have also demonstrated a good potential for studying anthropogenic and artificial-ventilation sources of air dynamic and circulation in local-scale processes of air pollution.     

Effect of temperature on single and competitive adsorptions of Cu(II) and Zn(II) onto natural clays

This study conducted a combined adsorption-sequential extractionanalysis (CASA), by which five phases (i.e., exchangeable, carbonate, Mn-Oxide, organic, and Fe-Oxide phases) of adsorbed heavy metals were analyzed, to investigate temperature effects on single and competitive adsorptions of Zn(II) and Cu(II) ontonatural clays. In the case of single adsorption of Zn, the exchangeable phase adsorption decreased from 65 to 40%, but thecarbonate phase adsorption increased from 30 to 40%, with an increase in temperature from 15 to 55 °C. However, in itscompetitive adsorption with Cu, Zn was mostly present in the exchangeable phase (over 90%), and with an increase in temperature, the exchangeable phase adsorption decreased only 10%. In the case of Cu, over 50% among the total amount of adsorption was present in the carbonate phase in both cases ofsingle and competitive adsorptions. The carbonate phaseadsorption of Cu increased from 56 to 61% and from 60 to 66% in single and competitive adsorptions, respectively, with atemperature increase. These results show that in the case of Zn,the major mechanism of retention in natural clay soils might beexchangeable phase adsorption, especially in the case of competitive adsorption with Cu. However, in the case of Cu, the major mechanism might be carbonate phase adsorption, which is known to be a more immobile phase than exchangeable phase adsorption. It seems that the adsorption of Zn and Cu onto natural clays is an endothermic reaction, which represents thatthe adsorption equilibrium constants and capacities increase with a temperature increase, with the exception of exchangeablephase adsorption.