鲤体内芳香烃受体的分离纯化及其与葸的相互作用

从暴露于污染物蒽的鲤肝脏中提取出芳香烃受体,并采用紫外可见分光光度计进行最大吸收波长扫描,再通过离子交换层析法分离纯化鲤体内的芳香烃受体,并采用聚丙烯酰胺凝胶电泳对受体进行鉴定,最后通过傅里叶变换红外光谱探讨芳香烃受体与蒽结合后的结构变化.结果表明,提取的芳香烃受体在280 nm处有特征吸收峰,测得质量浓度为27.3 mg/mL.通过离子交换层析法纯化了单一组分的受体蛋白质,其相对分子质量约为110 kD.测定了芳香烃受体的红外光谱,与蒽结合后其在一定波段的谱峰发生了明显位移,表明污染物配体蒽能与芳香烃受体结合,并对其蛋白二级结构产生明显影响.     

Persistent organochlorine pesticides in internal organs of coypu,Myocastor coypus

A highly selective and sensitive method based on gas chromatography-tandem mass spectrometry (GC-MS/MS) to identify and quantify persistent organochlorine pesticides, (18 compounds including primary compounds and metabolites), in animal internal organs (kidneys, liver, and brain) has been developed. Tandem mass spectrometric conditions were individually optimized for each target compound in Multiple Reaction Monitoring (MRM) mode to obtain maximum sensitivity. Prior to instrumental analysis, a sample preparation method based on matrix solid phase dispersion (MSPD) followed by acidic digestion with sulfuric acid to reduce matrix co-extractives was employed. Analyses of real samples were carried out on coypus (Myocastor coypus) from the autumn slaughter of 19 animals. In the analyzed samples, three of the target compounds, namely DDE-pp′ (DDT metabolite), HCB and lindane, were detected. Their concentration levels fell in the ranges of 0.003–0.007, 0.003–0.025, and 0.003–0.021 mg kg^?1 (0.005, 0.010, and 0.010 mg kg^?1 on average) in the case of DDE-pp′, HCB and lindane, respectively. Although low quantities of organochlorine pesticides do not pose an immediate danger to consumers' health, they should be of public health concern considering long-term, low-dose exposure.     

Application of chemometric analysis based on physicochemical and chromatographic data for the differentiation origin of plant protection products containing chlorpyrifos

The aim of this study was to investigate the similarities and dissimilarities between the pesticide samples in form of emulsifiable concentrates (EC) formulation containing chlorpyrifos as active ingredient coming from different sources (i.e., shops and wholesales) and also belonging to various series. The results obtained by the Headspace Gas Chromatography–Mass Spectrometry method and also some selected physicochemical properties of examined pesticides including pH, density, stability, active ingredient and water content in pesticides tested were compared using two chemometric methods. Applicability of simple cluster analysis and also principal component analysis of obtained data in differentiation of examined plant protection products coming from different sources was confirmed. It would be advantageous in the routine control of originality and also in the detection of counterfeit pesticides, respectively, among commercially available pesticides containing chlorpyrifos as an active ingredient.     

Mass communication and pro-environmental behaviour: waste recycling in Hong Kong

Treatment of domestic waste has been one of the major environmental problems in Hong Kong. The Government has a stated policy to advocate the minimization of waste disposal through the encouragement of waste reduction, re-use and recycling. The current study applies Ajzen's theory of planned behaviour to predict behavioural intention and actual behaviour of voluntary use of waste recycling receptacles. A systematic random sample of 173 household members in a public housing estate were interviewed. The results indicated that attitude was the major factor in predicting behavioural intention, followed by behavioural control and social norms. Attitude, subjective norm and perceived control together explained 44% of the variance of behavioural intention. Perception of mass media as a major source of subjective norm was first introduced and tested. Mass communication stood out as one of the major sources of influence in establishment of subjective norms. The study has the implication that more publicity messages should be put on the mass media to promote green behaviours.     

Consequence analysis of premixed flammable gas explosion occurring in pipe using a coupled fluid-structure-fracture approach

A coupled fluid-structure-fracture approach incorporating a high-efficiency detonation modeling algorithm was proposed to study the consequences of premixed flammable gas explosion occurring in pipe. A strain-rate-dependent failure criterion which is the vital prerequisite for accurate consequences prediction was derived based on the failure mechanism of materials at high strain rates and it was applied to account for the fracture of pipe. The simulated pressure time history and fracture patterns were validated against experimental results and good agreements were acquired. The interaction between detonation wave and pipe during crack extension, dynamic fracture processes of pipes with different initial flaws, venting features of detonation products and pressure profiles out of pipe were obtained and discussed in detail. The comparison with existing semi-empirical and CFD methods was performed and it is revealed that the deformation and fracture of pipe have obvious negative influences on the peak overpressure and the rate of pressure increase out of pipe. Because the energy absorption and dissipation due to structural deformation and fracture are well taken into account, the coupled fluid-structure-fracture method is expected to provide more rational consequences prediction and analysis results.     

High efficiency chlorine removal from polyvinyl chloride (PVC) pyrolysis with a gas–liquid fluidized bed reactor

In this research a gas–liquid fluidized bed reactor was developed for removing chlorine (Cl) from polyvinyl chloride (PVC) to favor its pyrolysis treatment. In order to efficiently remove Cl within a limited time before extensive generation of hydrocarbon products, the gas–liquid fluidized bed reactor was running at 280–320 °C, where hot N₂ was used as fluidizing gas to fluidize the molten polymer, letting the molten polymer contact well with N₂ to release Cl in form of HCl. Experimental results showed that dechlorination efficiency is mainly temperature dependent and 300 °C is a proper reaction temperature for efficient dechlorination within a limited time duration and for prevention of extensive pyrolysis; under this temperature 99.5% of Cl removal efficiency can be obtained within reaction time around 1 min after melting is completed as the flow rate of N₂ gas was set around 0.47–0.85 Nm³ kg^?1 for the molten PVC. Larger N₂ flow rate and additives in PVC would enhance HCl release but did not change the final dechlorination efficiency; and excessive N₂ flow rate should be avoided for prevention of polymer entrainment. HCl is emitted from PVC granules or scraps at the mean time they started to melt and the melting stage should be taken into consideration when design the gas–liquid fluidized bed reactor for dechlorination.     

Influence of aeration modes on leachate characteristic of landfills that adopt the aerobic–anaerobic landfill method

As far as the optimal design, operation, and field application of the Aerobic–Anaerobic Landfill Method (AALM) are concerned, it is very important to understand how aeration modes (different combinations of aeration depth and air injection rate) affect the biodegradation of organic carbon and the transformation of nitrogen in landfill solid waste. Pilot-scale lysimeter experiments were carried out under different aeration modes to obtain detailed information regarding the influence of aeration modes on leachate characteristics. Results from these lysimeter experiments revealed that aeration at the bottom layer was the most effective for decomposition of organic carbon when compared with aeration at the surface or middle layers. Moreover, the air injection rate led to different nitrogen transformation patterns, unlike the lesser influence it has on organic carbon decomposition. Effective simultaneous nitrification and denitrification were observed for the aeration mode with a higher air injection rate (=1.0 L/min). On the other hand, the phenomenon of sequenced nitrification and denitrification could be observed when a low air injection rate (=0.5 L/min.) was employed. Finally, it is concluded that, for AALM, air injection with a higher air injection rate at the deepest layer near the leachate collection pipe tends to accelerate the stabilization of landfill waste as defined in terms of the enhancement of denitrification as well as organic carbon decomposition.     

A new gas chromatographic determination of ethylenethiourea residues without derivatization

Abstract

A new gas chromatographic method reliable in the microgram range, was developed to measure ETU residues in various crops. Contrary to previously published procedures, this new method does not require prior derivatization of the ETU. The limit of sensitivity was shown to be 0.01 ppm using the flame photometric detector, FPD (sulfur mode, 394 nm).     

Pyrolysis of waste tyres: A review

Approximately 1.5 billion tyres are produced each year which will eventually enter the waste stream representing a major potential waste and environmental problem. However, there is growing interest in pyrolysis as a technology to treat tyres to produce valuable oil, char and gas products. The most common reactors used are fixed-bed (batch), screw kiln, rotary kiln, vacuum and fluidised-bed. The key influence on the product yield, and gas and oil composition, is the type of reactor used which in turn determines the temperature and heating rate. Tyre pyrolysis oil is chemically very complex containing aliphatic, aromatic, hetero-atom and polar fractions. The fuel characteristics of the tyre oil shows that it is similar to a gas oil or light fuel oil and has been successfully combusted in test furnaces and engines. The main gases produced from the pyrolysis of waste tyres are H₂, C₁–C₄ hydrocarbons, CO₂, CO and H₂S. Upgrading tyre pyrolysis products to high value products has concentrated on char upgrading to higher quality carbon black and to activated carbon. The use of catalysts to upgrade the oil to a aromatic-rich chemical feedstock or the production of hydrogen from waste tyres has also been reported. Examples of commercial and semi-commercial scale tyre pyrolysis systems show that small scale batch reactors and continuous rotary kiln reactors have been developed to commercial scale.     

The Silent Mass Extinction of Insect Herbivores in Biodiversity Hotspots

Abstract: Habitat loss is silently leading numerous insects to extinction. Conservation efforts, however, have not been designed specifically to protect these organisms, despite their ecological and evolutionary significance. On the basis of species–host area equations, parameterized with data from the literature and interviews with botanical experts, I estimated the number of specialized plant‐feeding insects (i.e., monophages) that live in 34 biodiversity hotspots and the number committed to extinction because of habitat loss. I estimated that 795,971–1,602,423 monophagous insect species live in biodiversity hotspots on 150,371 endemic plant species, which is 5.3–10.6 monophages per plant species. I calculated that 213,830–547,500 monophagous species are committed to extinction in biodiversity hotspots because of reduction of the geographic range size of their endemic hosts. I provided rankings of biodiversity hotspots on the basis of estimated richness of monophagous insects and on estimated number of extinctions of monophagous species. Extinction rates were predicted to be higher in biodiversity hotspots located along strong environmental gradients and on archipelagos, where high spatial turnover of monophagous species along the geographic distribution of their endemic plants is likely. The results strongly support the overall strategy of selecting priority conservation areas worldwide primarily on the basis of richness of endemic plants. To face the global decline of insect herbivores, one must expand the coverage of the network of protected areas and improve the richness of native plants on private lands.