军用浸渍活性炭中银含量测定方法——火焰原子吸收分光光度法

本研究建立了一种用空气-乙炔火焰原子吸收分光光度法测定浸渍活性炭中银含量的分析方法，对酸介质浓度、共存元素的干扰进行了探讨，在0—1．0ml沪范围内，银含量与吸光度呈线性关系，相关系数为0．9999。对09型浸渍活性炭标准物质进行测定，测定结果的相对标准偏差为0．191％（n=10），加标回收率为97．5％-101．4％。     

An application of 3D gasdynamic modeling for the prediction of overpressures in vented enclosures

A three-dimensional gasdynamic model with constant burning rate is applied for the prediction of the maximum pressure rise from gaseous combustion in vented enclosures. A series of calculations for an enclosure with aspect ratio close to unity are presented. Both cases with and without obstacles in the enclosure are considered. Results of calculations are compared with a simple 0D solution for spherical vessels. It is shown that, in cases without obstacles, the 0D solution for the maximum reduced overpressures is close to the predictions of the detailed modeling. In cases with obstacles, the detailed simulation gives significantly higher overpressures than those from the 0D model. However, in all the cases the reduced pressures are correlated well with the maximum flame surface area.     

“Vybuchovy trojuhelnik”: A software tool for evaluation of explosibility of coal mine atmosphere

Rescue operations during mine fires or methane explosions are highly dangerous for rescue workers. The knowledge of the composition of the coal mine atmosphere and the calculations of its explosibility may help to increase the safety of the rescuers. In the Czech Republic, a system called “Mine Gas Laboratory” (DPL) has been used for these purposes. The DPL allows measurement of the composition of the mine atmosphere and transmits the data necessary for evaluation to the surface. Up to now the explosibility evaluation of the coal mine atmosphere has depended either on the rescuers’ experience or on software code calculation. The code called “Vybuchovy trojuhelnik” (explosion triangle) is a graphical computing system intended for fast assessment of explosibility of fuel–air mixture. This article introduces the code and describes two simple methods of explosibility evaluation. The first method is “explosion triangle analysis”—a graphical method based on empirical graphs transformed into equations. The second method uses thermodynamic calculation based on chemical balance dynamics and Gibbs and Helmholtz energy. According to the requirements of the Czech Bureau of Mining (CBU) and Central Mine Rescue Service (HBZS), the code solves the problems of explosion triangle for both standard and non-standard coal mine atmosphere compositions. Unfortunately, the atmosphere composition must be introduced manually due to the unknown format of the data transmitted from the old DPL model. On 1 September 2005, a project started to develop a new system for on-line monitoring and atmosphere explosibility evaluation. The system should be able to measure CO₂, O₂, CH₄, H₂ and CO concentrations as well as the wind speed, temperature and humidity. The “Vybuchovy trojuhelnik” code will be used as a basis for explosibility evaluation, and an on-line connection with the new model of DPL will be established.     

Increase in Hair Lead, but not Blood Lead Content of Occupationally-Exposed Workers

This study attempted to investigate whether increased hair lead concentrations due to environmental exposure are accompanied by parallel increases in blood lead concentrations. A sample set consisting of both occupationally-exposed individuals and persons from the general population was investigated. The lead content of scalp and pubic hair from the general population (n=189), traffic police personnel (n=27) and battery workers (n=22) were analysed. The hair samples were taken from the nape of the neck by cutting 23 cm closest to the scalp and cleaned using a washing procedure developed in our laboratory. The effectiveness of the washing procedure was partly determined by examining the scanning electron micrographs of the hair samples. Venous samples of blood were taken from each volunteer's arm.The traffic police and battery plant operators sampled had significantly higher average scalp hair and pubic hair lead levels than the non occupationally-exposed general population. No significant differences were found between the blood lead values of these workers and the general population. Compared to the general population both occupationally-exposed groups had significantly more symptoms of lead toxicity.Lead particles were still observed on the hair shafts after the washing procedure. The amount of such lead contamination was difficult to quantify, the problem being further exacerbated by the difference in hair texture of the persons sampled. This exogenous contamination therefore detracts from the usefulness of hair as an indicator of lead exposure.     

An easy method to design gas/vapor relief system with rupture disk

Tank discharge gas/vapor flow problems are frequently encountered in both practice and design. To perform this type of design calculation, the first step is to identify whether the flow is choked or not through a trial-and-error solution of an equation for adiabatic flow with friction from a reservoir through a pipe. Developing a direct method without any trial-and-error to identify a choking condition would be helpful for expediting the flow calculations. This paper presents an easy and quick method to identify the choking of gas flow for an emergency relief system consisting of a rupture disk and vent piping. This greatly simplifies the design calculations. The proposed method for validating the venting adequacy of existing ERS circumvents the iteration calculation and the use of Lapple charts. Three case studies for the design of vent piping for rupture disks support the proposed method.     

Gas flame acceleration in long ducts

In many practical situations, a flame may propagate along a pipe, accelerate and perhaps transform into a devastating detonation. This phenomenology has been known, more or less qualitatively, for a long time and mitigation techniques were proposed to try and avoid this occurrence (flame arresters, vents,...). A number of parameters need to be known and in particular the “distance to detonation” and more generally the flame acceleration characteristic scales. Very often, the ratio between the detonation run-up distance and the pipe diameter is used without any strong justification other that using a non-dimensional parameter (L/D). In this paper, novel experimental evidence is presented on the basis of relatively large scale experiments using 10 cm and 25 cm inner diameter duct with a length between 7 and 40 m. Homogeneous C₂H₄-air, CH₄-air, C₃H₈-air and H₂-air mixtures were used and different ignition sources. The interpretation suggests that the self-acceleration mechanism of the flame may be much better represented by flame instabilities than by turbulence build-up. One consequence would be that the maximum flame velocity and, following, the maximum explosion overpressure, would be rather linked with the run-up distance than with the L/D ratio.     

Applying a new method for direct collection, volume quantification and determination of N2 emission from water

The emission of N₂ is important to remove excess N from lakes, ponds, and wetlands. To investigate the gas emission from water, Gao et al. (2013) developed a new method using a bubble trap device to collect gas samples from waters. However, the determination accuracy of sampling volume and gas component concentration was still debatable. In this study, the method was optimized for in situ sampling, accurate volume measurement and direct injection to a gas chromatograph for the analysis of N₂ and other gases. By the optimized new method, the recovery rate for N₂ was 100.28% on average; the mean coefficient of determination (R²) was 0.9997; the limit of detection was 0.02%. We further assessed the effects of the new method, bottle full of water, vs. vacuum bag and vacuum vial methods, on variations of N₂ concentration as influenced by sample storage times of 1, 2, 3, 5, and 7 days at constant temperature of 15°C, using indices of averaged relative peak area (%) in comparison with the averaged relative peak area of each method at 0 day. The indices of the bottle full of water method were the lowest (99.5%-108.5%) compared to the indices of vacuum bag and vacuum vial methods (119%-217%). Meanwhile, the gas chromatograph determination of other gas components (O₂, CH₄, and N₂O) was also accurate. The new method was an alternative way to investigate N₂ released from various kinds of aquatic ecosystems.     

Analysis of trace dicyandiamide in stream water using solid phase extraction and liquid chromatography UV spectrometry

An improved method for trace level quantification of dicyandiamide in stream water has been developed. This method includes sample pretreatment using solid phase extraction. The extraction procedure (including loading, washing, and eluting) used a flow rate of 1.0 mL/min, and dicyandiamide was eluted with 20 mL of a methanol/acetonitrile mixture (V/V = 2:3), followed by pre-concentration using nitrogen evaporation and analysis with high performance liquid chromatography–ultraviolet spectroscopy (HPLC–UV). Sample extraction was carried out using a Waters Sep-Pak AC-2 Cartridge (with activated carbon). Separation was achieved on a ZIC^®-Hydrophilic Interaction Liquid Chromatography (ZIC-HILIC) (50 mm × 2.1 mm, 3.5 μm) chromatography column and quantification was accomplished based on UV absorbance. A reliable linear relationship was obtained for the calibration curve using standard solutions (R² > 0.999). Recoveries for dicyandiamide ranged from 84.6% to 96.8%, and the relative standard deviations (RSDs, n = 3) were below 6.1% with a detection limit of 5.0 ng/mL for stream water samples.