An integrated EDIB model for probabilistic risk analysis of natural gas pipeline leakage accidents

Natural gas pipeline construction is developing rapidly worldwide to meet the needs of international and domestic energy transportation. Meanwhile, leakage accidents occur to natural gas pipelines frequently due to mechanical failure, personal operation errors, etc., and induce huge economic property loss, environmental damages, and even casualties. However, few models have been developed to describe the evolution process of natural gas pipeline leakage accidents (NGPLA) and assess their corresponding consequences and influencing factors quantitatively. Therefore, this study aims to propose a comprehensive risk analysis model, named EDIB (ET-DEMATEL-ISM-BN) model, which can be employed to analyze the accident evolution process of NGPLA and conduct probabilistic risk assessments of NGPLA with the consideration of multiple influencing factors. In the proposed integrated model, event tree analysis (ET) is employed to analyze the evolution process of NGPLA before the influencing factors of accident evolution can be identified with the help of accident reports. Then, the combination of DEMATEL (Decision-making Trial and Evaluation Laboratory) and ISM (Interpretative Structural Modeling) is used to determine the relationship among accident evolution events of NGPLA and obtain a hierarchical network, which can be employed to support the construction of a Bayesian network (BN) model. The prior conditional probabilities of the BN model were determined based on the data analysis of 773 accident reports or expert judgment with the help of the Dempster-Shafer evidence theory. Finally, the developed BN model was used to conduct accident evolution scenario analysis and influencing factor sensitivity analysis with respect to secondary accidents (fire, vapor cloud explosion, and asphyxia or poisoning). The results show that ignition is the most critical influencing factor leading to secondary accidents. The occurrence time and occurrence location of NGPLA mainly affect the efficiency of emergency response and further influence the accident consequence. Meanwhile, the weight ranking of economic loss, environmental influence, and casualties on social influence is determined with respect to NGPLAs.     

Impact of leakage location and downwind storage tank on the gas dispersion in a typical chemical tank storage area

Toxic gas leakage in a tank area can have catastrophic consequences. Storage tank leakage location (particularly for high leakage) and downwind storage tanks potentially influence gas diffusion in tank areas. In this study, we developed a numerical and experimental method to investigate the impact of a high leakage location and downwind storage tank on gas diffusion based on three (1.05H, 0.90H, and 0.77H, H was the tank height, 22m) leakage field experiments on the leeward side of storage tank, which have been not conducted before. The experiments revealed an unexpected phenomenon: the maximum ground concentration first decreased and then increased with increasing leakage height. The simulations illustrated that the differences in micrometeorological conditions caused the maximum ground concentration of gas emitted from the roof to be higher than that emitted from the tank wall near the storage tank height. The downwind storage tank 1) had little influence on the entire diffusion direction but altered the local diffusion pattern; 2) reduced the maximum ground concentration (∼18.7%) and the distance from the emission source (approximately a storage tank diameter); and 3) had strong influences on the concentration, velocity, turbulence, and pressure on the leeward side. The concentration negatively correlated with the velocity, pressure, and turbulence in the middle of the two storage tanks on wind centerline. Our results can improve understanding of gas dispersion in tank areas and provide references for mitigating loss and protecting lives during emergency response processes.     

Influence of sewage culvert cover plate thickness on dynamic response and damage of the cover plate under gas explosion

In order to address the risk of combustible gas explosions in sewage culverts, a numerical model was established using ANSYS/LS-DYNA software. The model consisted of a culvert and a cover plate, and was used to study the effect of cover plate thickness (ranging from 0.08 m to 0.12 m) on the dynamic response and damage of the structure under explosive loads. The results indicated that, during the loading negative pressure stage, the equivalent stress peak value of the central monitoring unit of the cover plate first increased and then decreased with increasing cover plate thickness. Additionally, the maximum principal stress peak value first decreased and then increased, while the maximum shear stress peak value first increased and then decreased. During the loading positive pressure stage, the maximum principal strain peak value of the monitoring unit decreased overall with increasing cover plate thickness. However, the equivalent plastic strain peak value initially increased and then decreased gradually. The equivalent strain indicated that plastic damage occurred in the cover plate. Beyond a thickness of 0.11 m, increasing the cover thickness did not appear to enhance its resistance to plastic damage. The damage analysis revealed that as cover plate thickness increased, the peak displacement and velocity of the monitoring unit continued to decrease, while the overall stability and explosive resistance of the cover plate increased. Additionally, the number of damaged fragments decreased. However, once the cover plate thickness reached 0.11 m, the bonding performance of the reinforced concrete structure had been fully developed, increasing the thickness of the cover plate no longer had a significant impact on the explosive resistance of the cover plate.     

Study on acceleration and suppression properties of coal gangue with different void fractions on gas explosion propagation

Gas explosion is one of the main disasters in coal mining. Plenty of coal gangue are generally distributed in the disaster areas in gob. Experiments were carried out to explore the propagation law of the gas explosion distributed by coal gangue. The variation characteristics of the overpressure, pressure rise rate, and flame shape with void fractions were analyzed. The results showed that the effect of the coal gangue on the explosion intensity changed from suppression to acceleration with the increase of void fraction, the flame front upstream blockage area changed from laminar state to turbulent divergent state, and a reverse flame was formed. When the void fraction of the coal gangue was 0.50–0.65, the maximum overpressure downstream of the blocked area were positively correlated with the void fraction and the critical suppression range was between 0.50 and 0.55. When the void fraction was lower than 0.50, the flame was quenched in the coal gangue, neither the flame nor the pressure could pass through the blocked area. It is helpful to guide the improvement of coal recovery process to avoid the expansion of the explosion impact in coalmine gob.     

捕集阱顶空-气相色谱/质谱法检测地表水中25种挥发性有机物

建立了捕集阱顶空-气相色谱/质谱法检测地表水中25种挥发性有机物的分析方法。采用正交实验设计对捕集阱顶空条件进行了优化,该方法相关系数0.995,加标回收率为90%~110%,方法检出限为0.08~0.39μg/L,相对标准偏差(n=7)为0.7%~4.8%,仪器检出限低于0.04μg/L。方法准确度和灵敏度较好,可以满足对地表水中25种挥发性有机物的检测要求。     

Heavy metal bioaccumulation in selected medicinal plants collected from Khetri copper mines and comparison with those collected from fertile soil in Haridwar,India

Heavy metal distribution in medicinal plants is gaining importance not only as an alternative medicine, but also for possible concern due to effects of metal toxicity. The present study has been focused on emphasizing the heavy metal status and bioaccumulation factors of V, Mn, Fe, Co, Cu, Zn, Se (essential metals) and Cr, Ni, Cd, As and Pb (potentially toxic metals) in medicinal plants grown under two different environmental conditions e.g., near to Khetri copper mine and those in fertile soils of Haridwar, both in India, using Instrumental Neutron Activation Analysis (relative method) and Atomic Absorption Spectrometry. The copper levels in the medicinal plants from Khetri were found to be 3-4 folds higher (31.6–76.5 mg kg^?1) than those from Haridwar samples (7.40–15.3 mg kg^?1), which is correlated with very high copper levels (763 mg kg^?1) in Khetri soil. Among various heavy metals, Cr (2.60–5.92 mg kg^?1), Cd (1.47–2.97 mg kg^?1) and Pb (3.97–6.63 mg kg^?1) are also higher in concentration in the medicinal plants from Khetri. The essential metals like Mn (36.4–69.3 mg kg^?1), Fe (192–601 mg kg^?1), Zn (24.9–49.9 mg kg^?1) and Se (0.13–0.91 mg kg^?1) and potentially toxic metals like Ni (3.09–9.01 mg kg^?1) and As (0.41–2.09 mg kg^?1) did not show much variations in concentration in the medicinal plants from both Khetri and Haridwar. The medicinal plants from Khetri, e.g., Ocimum sanctum, Cassia fistula, Withania somnifera and Azadirachta Indica were found rich in Ca and Mg contents while Aloe barbadensis showed moderately high Ca and Mg. Higher levels of Ca-Mg were found to correlate with Zn (except Azadirachta Indica). The bioaccumulation factors (BAFS) of the heavy metals were estimated to understand the soil-to-plant transfer pattern of the heavy metals. Significantly lower BAF values of Cu and Cr were found in the medicinal plants from Khetri, indicating majority fraction of these metals are precipitated and were immobilized species unsuitable for plant uptake. Overall, Withania somnifera (Ashwagandha) showed very high metal bioaccumulation.     

A rapid method for determination of Aroclor 1260 in cattle adipose tissue

Abstract

A simple analytical procedure for the determination of Aroclor 1260 in cattle adipose tissue is described. The polychlorinated biphenyls residues are extracted from the tissue using a soxhlet extractor and the extracts are cleaned up using a florisil SEP‐PAK cartridge. The residues are detected using a gas chromatograph equipped with an electron capture detector. The effect of extraction time of the Aroclor 1260 residues from the tissue has been investigated and a period of four hours is found to give satisfactory percent recoveries. Greater than 85 percent recoveries were obtained from adipose tissue spiked with Aroclor 1260. The method can be used to detect Aroclor 1260 residue levels as low as 0.10 parts per million.

The method was used to analyze thirty‐one cattle adipose tissue samples out of which twenty‐six samples were taken from cattle suspected of exposure to a pasture containing electrical transformers and capacitors containing Aroclor 1260. Five control samples were collected from cattle with no known exposure. All twenty‐six samples were found to contain non‐detectable Aroclor 1260 residues.     

改进测定水中氨氮分子吸收光谱法的试验研究

水中氨氮含量是反应水质状况的重要指标。文章对测定水中氨氮气相分子吸收光谱法(标准号HJ/T195-2005)进行了改进试验研究。第一,对氧化剂的配比进行了改进,使氨氮的测定范围扩展至100μg。第二,对标准HJ/T195-2005中直接使用亚硝酸钠标准溶液做标准曲线的处理方式也做了探讨。通过一系列对比实验认为,应用硫酸铵标准溶液做工作曲线更加准确合理。最后应用改进后的气相分子吸收光谱法和纳氏比色法或滴定法对多种实际废水样品进行同时测定。结果表明,改进后的气相分子吸收光谱法测定氨氮的范围更宽,灵敏度更高和准确度更好。     

Study of metabolites from the degradation of polycyclic aromatic hydrocarbons (PAHs) by bacterial consortium enriched from mangrove sediments

The PAH metabolites produced during degradation of fluorene, phenanthrene and pyrene by a bacterial consortium enriched from mangrove sediments were analyzed using the on-fiber silylation solid-phase microextraction (SPME) combining with gas chromatography–mass spectrometry (GC–MS) method. Seventeen metabolites at trace levels were identified in different PAH degradation cultures based on the full scan mass spectra. In fluorene degradation cultures, 1-, 2-, 3- and 9-hydroxyfluorene, fluorenone, and phthalic acid were detected. In phenanthrene and pyrene degradation cultures, various common metabolites such as phenanthrene and pyrene dihydrodiols, mono-hydroxy phenanthrene, dihydroxy pyrene, lactone and 4-hydroxyphenanthrene, methyl ester, and phthalic acid were found. The detection of various common and novel metabolites demonstrates that SPME combining with GC–MS is a quick and convenient method for identification as well as monitoring the real time changes of metabolite concentrations throughout the degradation processes. The knowledge of PAH metabolic pathways and kinetics within indigenous bacterial consortium enriched from mangrove sediments contributes to enhance the bioremediation efficiency of PAH in real environment.     

Influence of super-absorbent polymer on the growth rate of gas hydrate

The growth rate of hydrate and morphology of methane hydrate formation were studied in a visual pressure cell at 5.5 MPa. The gas hydrate formation was carried out (coal mine methane (CMM) + tetrahydrofuran (THF) + sodium dodecyl sulphate (SDS) + H₂O) with and without SAP. Experimental data on the hydrate growth rate and induction time were obtained for three different CMM samples. The influence of SAP on hydrate growth rate was determined. Results showed that after the addition of SAP, with the methane concentration increased in CMM, the induction time was reduced by 9 min, 10 min and 3 min, and the growth rate was shortened by 0.56 × 10⁻⁶/m³ min⁻¹, 0.53 × 10⁻⁶/m³ min⁻¹ and 1.42 × 10⁻⁶/m³ min⁻¹, respectively. This study could be useful for the recovery of methane from CMM by forming hydrate in the chemical and mining industry.