亚氯酸钠/纯碱溶液处理硝基甲烷工艺废气的脱硝研究

针对硝基甲烷工艺尾气中的高浓度氮氧化物的去除问题,在自行设计的四级填料喷淋吸收塔中进行湿法脱硝研究,实验条件下总脱硝效率能达到85%。实验先采取亚氯酸钠溶液对尾气进行氧化处理,后使用纯碱溶液对尾气进行吸收处理,并对气速、液气比、温度、溶液pH值等工况参数进行了研究,确定了最佳实验条件。     

吹扫捕集-气相色谱-质谱联用法测定地表水中1,2-二氯苯和1,4-二氯苯研究

通过吹扫捕集富集地表水中1,2-二氯苯和1,4-二氯苯,解吸后用气相色谱-质谱联用法同时测定,内标法定量,加入硫酸钠提高方法的灵敏度,优化并验证检测方法.1,2-二氯苯和1,4-二氯苯在一定浓度范围内线性关系良好,方法检出限为0.01 μg/L,加标回收率和测定结果的相对标准偏差较好,符合分析测试质量控制要求.具有操作简单、样品用量少、组分损失低、回收率高等优点,不对环境造成二次污染.     

A multi-component two-phase flow algorithm for use in landfill processes modelling

This paper describes the finite difference algorithm that has been developed for the flow sub-model of the University of Southampton landfill degradation and transport model LDAT. The liquid and gas phase flow components are first decoupled from the solid phase of the full multi-phase, multi-component landfill process constitutive equations and are then rearranged into a format that can be applied as a calculation procedure within the framework of a three dimensional array of finite difference rectangular elements.The algorithm contains a source term which accommodates the non-flow landfill processes of degradation, gas solubility, and leachate chemical equilibrium, sub-models that have been described in White and Beaven (2013).The paper includes an illustration of the application of the flow sub-model in the context of the leachate recirculation tests carried out at the Beddington landfill project. This illustration demonstrates the ability of the sub-model to track movement in the gas phase as well as the liquid phase, and to simulate multi-directional flow patterns that are different in each of the phases.     

Effects of premixed methane concentration on distribution of flame region and hazard effects in a tube and a tunnel gas explosion

Study of flame distribution laws and the hazard effects in a tunnel gas explosion accident is of great importance for safety issue. However, it has not yet been fully explored. The object of present work is mainly to study the effects of premixed gas concentration on the distribution law of the flame region and the hazard effects involving methane-air explosion in a tube and a tunnel based on experimental and numerical results. The experiments were conducted in a tube with one end closed and the other open. The tube was partially filled with premixed methane-air mixture with six different premixed methane concentrations. Major simulation works were performed in a full-scale tunnel with a length of 1000 m. The first 56 m of the tunnel were occupied by methane–air mixture. Results show that the flame region is always longer than the original gas region in any case. Concentration has significant effects on the flame region distribution and the explosion behaviors. In the tube, peak overpressures and maximum rates of overpressure rise (dp/dt)_max for mixtures with lower and higher concentrations are great lower than that for mixtures close to stoichiometric concentration. Due to the gas diffusion effect, not the stoichiometric mixture but the mixture with a slightly higher concentration of 11% gets the highest peak overpressure and the shock wave speed along the tube. In the full-scale tunnel, for fuel lean and stoichiometric mixture, the maximum peak combustion rates is achieved before arriving at the boundary of the original methane accumulation region, while for fuel rich mixture, the maximum value appears beyond the region. It is also found that the flame region for the case of stoichiometric mixture is the shortest as 72 m since the higher explosion intensity shortens the gas diffusion time. The case for concentration of 13% can reach up to a longest value of 128 m for longer diffusion time and the abundant fuel. The “serious injury and death” zone caused by shock wave may reach up to 3–8 times of the length of the original methane occupied region, which is the widest damage region.     

Double-electrode arc welding process: Principle,variants, control and developments

Double-electrode gas metal arc welding (DE-GMAW) is a novel welding process in which a second electrode, non-consumable or consumable, is added to bypass part of the wire current. The bypass current reduces the heat input in non-consumable DE-GMAW or increases the deposition rate in consumable DE-GMAW. The fixed correlation of the heat input with the deposition in conventional GMAW and its variants is thus changed and becomes controllable. At the University of Kentucky, DE-GMAW has been tested/developed by adding a plasma arc welding torch, a GTAW (gas tungsten arc welding) torch, a pair of GTAW torches, and a GMAW torch. Steels and aluminum alloys are welded and the system is powered by one or multiple power supplies with appropriate control methods. The metal transfer has been studied at the University of Kentucky and Shandong University resulting in the desirable spray transfer be obtained with less than 100 A base current for 1.2 mm diameter steel wire. At Lanzhou University of Technology, pulsed DE-GMAW has been successfully developed to join aluminum/magnesium to steel. At the Adaptive Intelligent Systems LLC, DE-GMAW principle has been applied to the submerged arc welding (SAW) and the embedded control systems needed for industrial applications have been developed. The DE-SAW resulted in 1/3 reduction in heat input for a shipbuilding application and the weld penetration depth was successfully feedback controlled. In addition, the bypass concept is extended to the GTAW resulting in the arcing-wire GTAW which adds a second arc established between the tungsten and filler to the existing gas tungsten arc. The DE-GMAW is extended to double-electrode arc welding (DE-AW) where the main electrode may not necessarily to be consumable. Recently, the Beijing University of Technology systematically studied the metal transfer in the arcing-wire GTAW and found that the desired metal transfer modes may always be obtained from the given wire feed speed by adjusting the wire current and wire position/orientation appropriately. A variety of DE-AW processes are thus available to suit for different applications, using existing arc welding equipment.     

原子吸收法测定土壤中铜锌铅镉

通过对几种消解体系的对比 ,选择出铅、镉最佳的消解方法为硝酸 氢氟酸 双氧水体系 ;铜锌最佳的消解方法为硝酸 氢氟酸 高氯酸体系。不同方法既能达到全量分析的要求 ,又能使基体干扰降到最小。通过对标准样品的多次测定 ,测定值均在其保证值范围内 ,铅镉相对标准偏差为 2 2 %～ 7 2 % ,加标回收率在 83%～ 116 %之间 ;铜锌相对标准偏差为 2 6 %～ 4 5 % ,加标回收率在 92 %～ 10 3%之间。     

南宁市街区挥发性有机物暴露水平初步分析

通过多层吸附管采样和热脱附-气相色谱-质谱联用对南宁市街区及市郊青秀山的挥发性有机物(VOCs)暴露水平进行了分析.结果显示:南宁市街道大气VOCs中一些毒害性苯系物的质量浓度较高,其中苯、甲苯的平均质量浓度分别达到47.5和159.2 μg/m3,分别是对照点青秀山的2.9和2.0倍;苯及其取代物的特征显示,南宁市街区VOCs主要来自机动车的尾气,同时一些公共活动场所苯系物比值和变化特征有所不同,显示出除交通尾气外的其他来源对挥发性有机物的贡献.      

高炉煤气洗涤水处理方法的研究

采用化学絮凝法处理高炉煤气洗涤水,通过实验确定了最佳的实验条件和工艺条件。     

气体反溶剂(GAS)过程细化技术及对炸药安全性能的影响研究

介绍了气体反溶剂 (GAS)过程细化技术原理及影响细化结果的主要因素 ,并从理论和实验角度分析了炸药重结晶细化处理后 ,对撞击感度和冲击波感度的影响 ;结果表明 ,GAS过程不仅可以有效地控制炸药颗粒的粒度、粒度分布、晶形 ,而且可以有效降低炸药撞击感度和冲击波感度 ,改善炸药安全性能