指数模型法在海洋石油设施风险评估中的应用

针对海上油气设施工况复杂、自然环境恶劣、应急救援难度大等特点,通过构建海上采油平台、海底管道和钻修井平台风险评估指数模型,辨识出水深增大、服役期长、腐蚀、疲劳、浅层地质条件变化等是风险等级升高的主要因素,识别出部分采油平台主结构疲劳损伤,海底管道内壁腐蚀及缺陷无法准确掌握、作业平台插桩不到位等问题,并提出检验检测、更换设施、强制退出等风险管控措施和建议。     

A rapid method for determination of Aroclor 1260 in cattle adipose tissue

Abstract

A simple analytical procedure for the determination of Aroclor 1260 in cattle adipose tissue is described. The polychlorinated biphenyls residues are extracted from the tissue using a soxhlet extractor and the extracts are cleaned up using a florisil SEP‐PAK cartridge. The residues are detected using a gas chromatograph equipped with an electron capture detector. The effect of extraction time of the Aroclor 1260 residues from the tissue has been investigated and a period of four hours is found to give satisfactory percent recoveries. Greater than 85 percent recoveries were obtained from adipose tissue spiked with Aroclor 1260. The method can be used to detect Aroclor 1260 residue levels as low as 0.10 parts per million.

The method was used to analyze thirty‐one cattle adipose tissue samples out of which twenty‐six samples were taken from cattle suspected of exposure to a pasture containing electrical transformers and capacitors containing Aroclor 1260. Five control samples were collected from cattle with no known exposure. All twenty‐six samples were found to contain non‐detectable Aroclor 1260 residues.     

天然气输送管道事故分析与防范

基于国内天然气输送管道西气东输、海气登陆、就近供应的现状,统计了2018年天然气事故,针对发生频率最高的输送管道事故,从事发省份、事发月份以及事发原因等方面进行初步分析,从完善各建设部门联合规划与信息共享机制、制定管道巡线方案和员工培训制度、提高天然气输送管道防腐检测能力以及规范天然气管道建设中承包商的HSE管理等角度提出防范措施,为预警预防国内天然气输送管道事故提供参考。     

芳烃联合装置地下管线测漏处理过程的风险分析

运用预先危险性分析法(PHA),对芳烃联合装置地下管线测漏处理过程中存在的风险进行了分析,确定了应采取的安全措施,取得了明显效果.     

Study of metabolites from the degradation of polycyclic aromatic hydrocarbons (PAHs) by bacterial consortium enriched from mangrove sediments

The PAH metabolites produced during degradation of fluorene, phenanthrene and pyrene by a bacterial consortium enriched from mangrove sediments were analyzed using the on-fiber silylation solid-phase microextraction (SPME) combining with gas chromatography–mass spectrometry (GC–MS) method. Seventeen metabolites at trace levels were identified in different PAH degradation cultures based on the full scan mass spectra. In fluorene degradation cultures, 1-, 2-, 3- and 9-hydroxyfluorene, fluorenone, and phthalic acid were detected. In phenanthrene and pyrene degradation cultures, various common metabolites such as phenanthrene and pyrene dihydrodiols, mono-hydroxy phenanthrene, dihydroxy pyrene, lactone and 4-hydroxyphenanthrene, methyl ester, and phthalic acid were found. The detection of various common and novel metabolites demonstrates that SPME combining with GC–MS is a quick and convenient method for identification as well as monitoring the real time changes of metabolite concentrations throughout the degradation processes. The knowledge of PAH metabolic pathways and kinetics within indigenous bacterial consortium enriched from mangrove sediments contributes to enhance the bioremediation efficiency of PAH in real environment.     

连续起伏管道投产过程中的气相运移研究*

为应对山区液体管道在投产过程中可能出现的气阻、超压问题,从气相运移角度出发,建立液顶气模型,研究在1个U型单元内积气形成、压缩和破碎的全过程,在此基础上,提出连接各个U型单元的气相的传递函数,探讨背压累积因素下,连续起伏管道投产过程中各个U型管段的积气情况和压力的变化,进行动态的建模和计算。以国内某原油管道的现场投产数据与模型结果进行比对。结果表明:可以更加准确地预测山区液体管道投产过程中的气相传递和压力变化过程,能为未来连续起伏大落差液体管道投产的安全稳定运行提供理论指导和技术支持。     

温度交变下液态乙烷回气管线热应力数值计算与现场测试*

为解决低温交变载荷下液态乙烷回气管线面临的安全问题,采用有限元法和现场试验研究管线在低温交变载荷下无裂纹和含轴向裂纹管线的热应力分布。结果表明:管内温度沿周向和轴向分布具有较大的不均匀性,内外壁温度分布趋势基本相似;随着计算时间的延长,管线整体热应力先增大再减小;卸压、温度回升过程中,管内温差逐渐减小,热应力逐渐减小;裂纹处的热应力大于远离裂纹及无裂纹处的热应力;对管线热应力变化进行现场监测,试验数据与仿真结果吻合。研究结果可为低温情况下液态乙烷回气管线的方案设计提供参考和指导。     

Corrosion failure probability analysis of buried gas pipelines based on subset simulation

Corrosion is the main reason for the failure of buried gas pipelines. For effective corrosion failure probability analysis, the structural reliability theory was adopted in this study to establish two calculation models for pipeline corrosion failure: the pressure failure model and von Mises stress failure model. Then, two calculation models for the corrosion failure probability were established based on a corrosion depth growth model obtained from actual survey data of soil corrosion characteristics. In an example, Monte Carlo simulation (MCS) and subset simulation (SS) were used to analyze the corrosion failure probability of pipelines, and the results were compared. SS can compensate for the shortcomings of MCS as it has higher computational efficiency and accuracy. Therefore, SS was adopted to simulate variations in the corrosion failure probability of buried pipelines with the service time for the two failure probability calculation models, which were applied to a natural gas pipeline located in a chemical industry park in Zhuhai, China. A sensitivity analysis was carried out on the relevant parameters that affect the failure probability. The results showed that multiple loads caused by the covering soil, residual stress, temperature differential, and bending stress have a non-negligible effect on the pipeline reliability. The corrosion coefficients gradually become the most important factors that affect the failure probability with increased service time. The proposed methodology considers the actual operating conditions of pipelines to provide a reliable theoretical basis for integrity management.     

Influence of super-absorbent polymer on the growth rate of gas hydrate

The growth rate of hydrate and morphology of methane hydrate formation were studied in a visual pressure cell at 5.5 MPa. The gas hydrate formation was carried out (coal mine methane (CMM) + tetrahydrofuran (THF) + sodium dodecyl sulphate (SDS) + H₂O) with and without SAP. Experimental data on the hydrate growth rate and induction time were obtained for three different CMM samples. The influence of SAP on hydrate growth rate was determined. Results showed that after the addition of SAP, with the methane concentration increased in CMM, the induction time was reduced by 9 min, 10 min and 3 min, and the growth rate was shortened by 0.56 × 10⁻⁶/m³ min⁻¹, 0.53 × 10⁻⁶/m³ min⁻¹ and 1.42 × 10⁻⁶/m³ min⁻¹, respectively. This study could be useful for the recovery of methane from CMM by forming hydrate in the chemical and mining industry.     

Experimental study on the influence mechanism of gas seepage on coal and gas outburst disaster

By using the self-developed triaxial servo-controlled seepage equipment for thermo-fluid-solid coupling of coal containing gas and the self-developed coal and gas outburst simulation test device, experiments to study the influence mechanism of gas seepage on coal and gas outburst disasters. The results show that: (i) gas seepage decreases the strength of coal containing gas and accelerates its failure process; (ii) under the same gas pressure, the confining pressure is larger, the more difficult the gas flows and the greater the intensity of coal containing gas is; (iii) in the process of coal and gas outburst, the greater the vertical ground stress is, the more powerful the outburst will be; (iv) the influence mechanism of gas seepage on coal and gas outburst disasters is as follows: firstly, gas seepage weakens the mechanical properties of coal body, which makes it much easier for coal and gas outburst to occur; secondly, on the same effect of external force, it will be easy to form a high gas pressure zone in the coal body under the difficult condition of gas seepage, and accumulate more gas compression energy, which is the energy source for coal and gas outburst, and it is also the main dynamic source to throw and grind the coal.