Adsorption of 2-mercaptobenzothiazole from aqueous solution by organo-bentonite

The adsorption behavior of 2-mercaptobenzothiazole onto organo-bentonite was investigated.Natural bentonite from Gaozhou in Guangdong Province,China was collected.Organo-bentonite was prepared by intercalation of cetyltrimethyl ammonium bromide into the natural bentonite.The physicochemical properties of the prepared organo-bentonite were characterized by X-ray diffraction,N2 adsorption-desorption isotherm and Fourier transform infrared spectroscopy.The results showed that montmorillonite is the main component of the natural bentonite.The basal spacing of the natural bentonite is 1.47 nm,which increased to 1.98 nm on intercalation with cetyltrimethyl ammonium bromide.Moreover,both the surface area and pore volume increased with intercalation.Clear CH2 stretching(3000-2800 cm-1) and scissoring(1480-1450 cm-1) modes of the intercalated surfactants were observed for organobentonite.Compared with the pseudo first-order kinetic model,the pseudo second-order kinetic model is more suitable to describe the adsorption kinetics of 2-mercaptobenzothiazole onto organo-bentonite.The adsorption capacity of 2-mercaptobenzothiazole onto organo-bentonite increased with increasing initial concentration of 2-mercaptobenzothiazole,but decreased with increasing adsorbent dosage.The adsorption isotherm of 2-mercaptobenzothiazole onto organo-bentonite fits well with the Langmuir model.The maximum adsorption capacity of organo-bentonite for 2-mercaptobenzothiazole was 33.61 mg/g,indicating that organo-bentonite is a promising adsorbent for 2-mercaptobenzothiazole.     

Removal of Cd2+ from water by Friedel’s salt (FS: 3CaO.Al2O3·CaCl2·10H2O): Sorption characteristics and mechanisms

The development of low-cost and efficient new mineral adsorbents has been a hot topic in recent years. In this study, Friedel’s salt (FS:3CaO·A12O3 ·CaCl2 ·10H2O), a hexagonal layered inorganic absorbent, was synthesized to remove Cd2+ from water. The adsorption process was simulated by Langmuir and Freundlich models. The adsorption mechanism was further analyzed with TEM, XRD, FT-IR analysis and monitoring of metal cations released and solution pH variation. The results indicated the adsorbent FS had an outstanding ability for Cd(Ⅱ) adsorption. The maximum adsorption capacity of the FS for Cd(Ⅱ) removal can reach up to 671.14 mg/g. The nearly equal numbers of Cd2+ adsorbed and Ca2+ released demonstrated that ion-exchange (both surface and inner) of the FS for Cd(Ⅱ) played an important role during the adsorption process. Furthermore, the surface of the FS after adsorption was microscopically disintegrated while the inner lamellar structure was almost unchanged. The behavior of Cd(Ⅱ) adsorption by FS was significantly affected by surface reactions. The mechanisms of Cd2+ adsorption by the FS mainly included surface complexation and surface precipitation. In the present study, the adsorption process was fitted better by the Langmuir isotherm model (R2 = 0.9999) than the Freundlich isotherm model (R2 = 0.8122). Finally, due to the high capacity for ion-exchange on the FS surface, FS is a promising layered inorganic adsorbent for the removal of Cd(Ⅱ) from water.     

Synthesis and characterization of agricultural controllable humic acid superabsorbent

Humic acid superabsorbent polymer (P(AA/AM-HA)) and superabsorbent polymer (P(AA/AM)) were synthesized by aqueous solution polymerization method using acrylic acid (AA), acrylamide (AM) and humic acid (HA) as raw material. The effects of N,N'-methylenebisacrylamide (MBA) crosslinking agent, potassium peroxydisulfate (KPS) initiator, reaction temperature, HA content, ratio of AA to AM, concentration of monomer and neutralization of AA on water absorption were investigated. Absorption and desorption ratios of nitrogen fertilizer and phosphate fertilizer were also investigated by determination of absorption and desorption ratio of NH₄⁺, PO₄^3- on P(AA/AM-HA) and P(AA/AM). The P(AA/AM-HA) and P(AA/AM) were characterized by Fourier translation infrared spectroscopy, biological photomicroscope and scanning electron microscopy (SEM). The optimal conditions obtained were as follows: the weight ratio of MBA to AA and AM was 0.003; the weight ratio of KPS to AA and AM was 0.008; the weight ratio of HA to AA was 0.1; the mole ratio of AM to AA is 0.1; the mole ratio of NaOH to AA is 0.9; the reaction temperature was 60℃. P(AA/AMHA) synthesized under optimal conditions, has a good saline tolerance, its water absorbency in distilled water and 0.9 wt.% saline solution is 1180 g/g and 110 g/g, respectively. P(AA/AM-HA) achieves half saturation in 6.5 min. P(AA/AM-HA) is superior to P(AA/AM) on absorption of NH₄⁺, PO₄^3-. The SEM micrograph of P(AA/AM-HA) shows a fine alveolate structure. The biological optical microscope micrograph of P(AA/AM-HA) shows a network structure. Graft polymerization between P(AA/AM) and HA was demonstrated by infrared spectrum. The P(AA/AM-HA) superabsorbent has better absorbing ability of water and fertilizer, electrolytic tolerance and fewer cost than P(AA/AM) superabsorbent.     

Adsorption of Cr(Ⅲ) from acidic solutions by crop straw derived biochars

Cr（Ⅲ） adsorption by biochars generated from peanut, soybean, canola and rice straws is investigated with batch methods. Adsorption of Cr（Ⅲ） increased as pH rose from 2.5 to 5.0. Adsorption of Cr（Ⅲ） led to peak position shifts in the FFIR-PAS spectra of the biochars and made zeta potential values less negative, suggesting the formation of surface complexes between Cr^3＋ and functional groups on the biochars. The adsorption capacity of Cr（Ⅲ） followed the order： peanut straw char 〉 soybean straw char 〉 canola straw char 〉 rice straw char, which was consistent with the content of acidic functional groups on the biochars. The increase in Cr^3＋ hydrolysis as the pH rose was one of the main reasons for the increased adsorption of Cr（Ⅲ） by the biochars at higher pH values. Cr（llI） can be adsorbed by the biochars through electrostatic attraction between negative surfaces and Cr^3＋, but the relative contribution of electrostatic adsorption was less than 5%. Therefore, Cr（Ⅲ） was mainly adsorbed by the biochars through specific adsorption. The Langumir and Freundlich equations fitted the adsorption isotherms well and can therefore be used to describe the adsorption behavior of Cr（Ⅲ） by the crop straw biochars. The crop straw biochars have great adsorption capacities for Cr（Ⅲ） under acidic conditions and can be used as adsorbents to remove Cr（Ⅲ） from acidic wastewaters.     

γ-Fe_2O_3/膨胀石墨复合材料吸附废水中六价铬的应用研究

介绍了采用溶胶凝胶法合成新型的复合材料-磁性的γ-Fe_2O_3膨胀石墨(MEG)复合材料。通过采用X-射线衍射(XRD)、扫描电子显微镜(SEM)、透射电子显微镜(TEM)以及X-光电子能谱仪(XPS)对该复合材料MEG进行了表征,结果表明MEG中γ一Fe_2O_3的粒径约为50nm,而且其中γ一Fe_2O_3和膨胀石墨通过C=O相互作用。复合材料MEG作为新型的六价铬吸附剂,通过吸附时间、初始溶液的pH值以及再生性对该吸附过程进行了考察。结果表明:在40 min内MEG吸附六价铬的过程基本达到平衡;在初始溶液的pH为3.5时,MEG对六价铬的最大吸附量可以达到16.4mg/g;而且该复合材料MEG重复使用3次后吸附效果基本没有下降。因此,复合材料MEG对于废水中六价铬的处理有选择性吸附作用,而且初始溶液的pH值对其吸附过程起着重要作用。     

华南某金矿下游河道砷镉分布特征

对华南某金矿下游河道砷、镉分布特征进行了初步研究,在金矿下游河道沿程布设7个沉积物采样点及两个河道断面,分析了沉积物及断面土壤的砷、镉、铬、铜、镍、铅、锌含量。采用Tessier连续提取法分析沉积物中砷、镉等重金属的形态。砷含量高达10 208⁷0 621 mg/kg,镉含量达2.870 621 mg/kg,镉含量达2.8¹0.2 mg/kg。沉积物中砷、铅元素含量沿水流方向总体呈现减少趋势,铬、铜元素含量沿水流方向呈现增加趋势,镉元素含量沿水流方向先增加后减少。上游断面沉积物砷、镉等重金属浓度由河流中泓线向河岸方向增加,砷含量由16 617 mg/kg增加至53 197 mg/kg;下游断面则反之,砷含量由16 860 mg/kg减少至384mg/kg。沉积物中砷、镉等重金属元素主要以铁锰氧化态、有机结合态和残渣态的形式存在。     

苏州河表层沉积物中总汞测定的研究

采用金汞齐富集-冷原子吸收光谱法直接测定苏州河表层沉积物中的总汞。结果表明:该方法在0.00～200ng范围内呈良好线性关系,检出限为0.005mg/kg(样品以0.2g计)。实际样品测定的RSD为1.24%～4.36%,加标回收率为91.8%～101%。与原子荧光光谱法相比,两种方法测定的结果没有显著差异。     

吸附法油气回收系统在成品油库中的应用

介绍了活性炭吸附法油气回收系统在成品油库汽油装车过程中的应用情况。结合油库油气回收改造的实际情况,重点介绍了了吸附法油气回收装置的工艺流程、油库油气回收系统的组成、监控系统主要功能、环保检测的相关事项,并分析了油气回收系统的经济效益,结合实际经验对油库油气回收改造提出了建议。     

新型磁性聚谷氨酸吸附剂对水中Pb2+的吸附去除

德岛大学安澤幹人首次利用γ-PGA在Fe3O4磁性纳米颗粒上进行涂层,制得了γ-聚谷氨酸-Fe3O4磁性纳米颗粒（PG-M）.本实验利用透射电镜以及扫描电镜对PG-M吸附剂的形貌进行了分析,发现PG-M与未涂层的Fe3 O4具有相似的形状以及大小,均为不规则的层状结构,且晶粒直径在120～320 nm之间;实验中针对性地对水溶液中Pb2＋进行了吸附探讨.在振荡实验中,通过主要参数的变化（pH值、吸附时间、竞争离子浓度、腐殖酸浓度）,得到如下结果：吸附最佳pH值为7.0;吸附量随着吸附时间的延长而增长,吸附平衡时间为45 min;Na＋对PG-M去除Pb2＋没有很强的干扰性,而Ca2＋则显示出一定的干扰作用;腐殖酸对吸附效果的影响是复杂的,表现为先增强吸附效果,随后降低吸附效果;最佳条件时Pb2＋的最大吸附量为93.3 mg/g.PG-M对Pb2＋的吸附均能较好地符合Freundlich和Langmuir等温吸附模型,其中Langmuir方程能更好地描述PG-M的吸附特征,说明PG-M在水溶液中对金属离子的吸附为单分子层吸附.PG-M吸附符合准二级动力学模型（r2〉0.99）.不同浓度的HCl和HNO3溶液的再生实验发现,0.1 mol/L的HCl溶液作为吸附再生液,可取得较好的再生效果.表明PG-M是可再生的,具有较好的经济性和可持续性.     

狭缝结构对船用排气引射装置气膜冷却性能影响的模拟研究

船用燃气轮机的排气温度很高,为了降低排气管道和排气烟羽的红外辐射,在排气喷管上方安装排气引射装置,利用引射原理卷吸环境中的冷空气,降低排气温度,同时在壁面上形成冷却气膜,防止壁面温度升高。排气引射装置的扩压管为多级圆环结构组成,文中利用数值计算的方法模拟了扩压管圆环间狭缝结构对壁面温度的影响,得到了壁面上的温度分布,确定了冷却气膜的长度,为扩压管的设计提供了参考。