Measurement of gas detonation blast loads in semiconfined geometry

The ignition and explosion of combustible vapor clouds represents a significant hazard across a range of industries. In this work, a new set of gas detonations experiments were performed to provide benchmark blast loading data for non-trivial geometry and explosion cases. The experiments were designed to represent two different accident scenarios: one where ignition of the vapor cloud occurs shortly after release and another where ignition is delayed and a fuel concentration gradient is allowed to develop. The experiments focused on hydrogen-air and methane-oxygen detonations in a semiconfined enclosure with TNT equivalencies ranging from 9 g to 1.81 kg. High-rate pressure transducers were used to record the blast loads imparted on the interior walls of a 1.8 m × 1.8 m × 1.8 m test fixture. Measurements included detonation wave velocity, peak overpressure, impulse, and positive phase duration. A comparison of the pressure and impulse measurements with several VCE models is provided. Results show that even for the most simplified experimental configuration, the simplified VCE models fail to provide predictions of the blast loading on the internal walls of the test fixture. It is shown that the confinement geometry of the experiment resulted in multiple blast wave reflections during the initial positive phase duration portion of the blast loading, and thus, significantly larger blast impulse values were measured than those predicted by analytical models. For the pressure sensors that experienced normally-reflect blast waves for the initial blast impulse, the Baker-Strehlow and TNT equivalency models still struggled to accurately capture the peak overpressure and reflected impulse. The TNO multi-energy model, however, performed better for the case of simple normally-reflected blast waves. The results presented here may be used as validation data for future model or simulation development.     

Experimental investigation on spontaneous ignition caused by pressurized hydrogen suddenly release into an S-shaped tube

An experimental investigation on the effects of continuous semicircular curved structure on spontaneous ignition during pressurized hydrogen suddenly release was conducted. An S-shaped tube with 700 mm in length and 10 mm in diameter was used in our experiments, and a straight tube with the same configuration was adopted for comparison. The results show that the continuously generated rarefaction waves and reflected shock waves make the pressure curves in the S-shaped tube more complicated. Meanwhile, the mean velocity and intensity of the leading shock wave undergo considerable attenuation when it propagates in the S-shaped structure. By comparing with the straight tube, the minimum critical pressure condition for spontaneous ignition in the S-shaped tube is slightly difficult to reach, but the difference is not huge. Nevertheless, the S-shaped structure can effectively promote hydrogen-air mixing and make combustion more intense. A secondary overpressure peak detected by the pressure transducer near the nozzle occurs in the spontaneous ignition cases and no such pressure increase is caught in the non-ignition cases. The transition from spontaneous combustion flame to a jet flame at the nozzle and the complete out-tube jet flame development process are captured and discussed.     

An innovative and comprehensive approach for the consequence analysis of liquid hydrogen vessel explosions

Hydrogen is one of the most suitable solutions to replace hydrocarbons in the future. Hydrogen consumption is expected to grow in the next years. Hydrogen liquefaction is one of the processes that allows for increase of hydrogen density and it is suggested when a large amount of substance must be stored or transported. Despite being a clean fuel, its chemical and physical properties often arise concerns about the safety of the hydrogen technologies. A potentially critical scenario for the liquid hydrogen (LH₂) tanks is the catastrophic rupture causing a consequent boiling liquid expanding vapour explosion (BLEVE), with consequent overpressure, fragments projection and eventually a fireball. In this work, all the BLEVE consequence typologies are evaluated through theoretical and analytical models. These models are validated with the experimental results provided by the BMW care manufacturer safety tests conducted during the 1990's. After the validation, the most suitable methods are selected to perform a blind prediction study of the forthcoming LH₂ BLEVE experiments of the Safe Hydrogen fuel handling and Use for Efficient Implementation (SH₂IFT) project. The models drawbacks together with the uncertainties and the knowledge gap in LH₂ physical explosions are highlighted. Finally, future works on the modelling activity of the LH₂ BLEVE are suggested.     

碱催化H2O2氧化法预处理奶牛养殖废水的试验研究

采用碱催化H2O2氧化法对奶牛养殖废水进行预处理试验,研究了温度、pH、H2O2投加量、反应时间等参数对COD去除效果的影响,确定了反应最佳运行条件。试验结果表明,碱催化H2O2氧化法在pH7~12时,对COD的去除率为40%~60%;当反应温度50℃,pH值9,H2O2投加量2.72 g/L,反应时间20 min时,COD的去除率为66.3%。     

基于二氧化钛纳米管有序阵列的氢气探测

基于气体传感器对H_2的泄漏进行探测监控,可以有效预防和控制H_2火灾爆炸事故的发生。通过阳极氧化法制备了高度有序的二氧化钛(TiO_2)纳米管阵列并制成气体传感器元器件,研究其在空气气氛中对H_2的气敏特性。通过粉末X射线衍射(XRD)、扫描电子显微镜(SEM),透射电子显微镜(TEM)表征手段研究了TiO_2纳米管的相组成和微观结构。TiO_2纳米管具有优异的气敏性能,可在200℃以上对H_2进行有效探测,检测极限达到20ppm。325℃对1 000ppm H_2灵敏度为446,响应时间为2s,对H_2选择性好。     

硫化物胁迫对日本沼虾呼吸代谢和能量代谢酶的影响

研究了硫化物暴露后日本沼虾细胞色素氧化酶(CCO)、琥珀酸脱氢酶(SDH)、延胡索酸还原酶(FRD)和乳酸脱氢酶(LDH)4种呼吸代谢酶及能量代谢酶-精氨酸激酶(AK)活性的变化规律.将日本沼虾暴露于0.6 mg·L~(-1)、2mg·L~(-1)的2个硫化物质量浓度组和不含硫化物的对照组水体中,暴露后0、2、12、24、48 h和解除暴露后48 h取肝胰腺和肌肉组织进行酶活性分析.结果显示:肝胰腺和肌肉组织SDH和CCO活性随硫化物质量浓度升高或暴露时间延长而显著降低(P<0.05).FRD、LDH和AK活性随硫化物质量浓度升高或暴露时间延长而显著升高(P<0.05).解除硫化物暴露后48 h,各质量浓度组酶活性与对照组无显著差异.上述酶活性还存在组织差异,肝胰腺呼吸代谢酶活性高于肌肉中相应酶活性,而AK活性与此相反.结果表明,硫化物胁迫导致日本沼虾有氧呼吸代谢减弱,无氧呼吸代谢增强,并动用其能量贮存物质磷酸精氨酸,产生更多ATP以适应外界不良环境.     

Hydroxyl radical concentration profile in photo-Fenton oxidation process: generation and consumption of hydroxyl radicals during the discoloration of azo-dye Orange II

Dynamic behaviors of hydroxyl (OH) radical generation and consumption in photo-Fenton oxidation process were investigated by measuring OH radical concentration during the discoloration of azo-dye Orange II. The effects of operating parameters for photo-Fenton discoloration, i.e. dosages of H₂O₂ and Fe, initial dye concentration, solution pH and UV irradiation, on the generation and consumption of OH radicals playing the main role in advanced oxidation processes were extensively studied. The scavenger probe or trapping technique in which coumarin is scavenger of OH radical was applied to estimate OH radical concentration in the photoreactor during the photo-Fenton discoloration process. The OH radical generation was enhanced with increasing the dosages of Fenton regents, H₂O₂ and Fe. At the initial stage of photo-Fenton discoloration of Orange II, the OH radical concentration rapidly increased (Phase-I) and the OH radical concentration decreased after reaching of OH radical concentration at maximum value (Phase-II). The decrease in OH radical concentration started when the complete discoloration of Orange II was nearly achieved and the H₂O₂ concentration became rather low. The dynamic behavior of OH radical concentration during the discoloration of Orange II was found to be strongly linked with the change in H₂O₂ concentration. The generation of OH radical was maximum at solution pH of 3.0 and decreased with an increase of solution pH. The OH radical generation rate in the Fenton Process was rather slower than that in the photo-Fenton process.     

Evidence of singlet oxygen and hydroxyl radical formation in aqueous goethite suspension using spin-trapping electron paramagnetic resonance (EPR)

The generation of reactive species in an aqueous goethite suspension, under room light and aeration conditions, was investigated using the electron paramagnetic resonance (EPR) technique employing spin trap agents. The trap reagents, including 5,5-dimethylpyrroline N-oxide (DMPO) and 2,2,6,6-tetramethylpiperidine (TEMP), were used for the detection of OH radicals (OH) and singlet oxygen (¹O₂), respectively. On the addition of DMPO to the goethite suspended solution, a DMPO-OH adduct was formed, which was not decreased, even in the presence of the OH scavenger, mannitol. This result implied a false positive interpretation from the DMPO-OH EPR signal. In the presence of TEMP reagent, a TEMP-O signal was detected, which was completely inhibited in the presence of the singlet oxygen scavenger, sodium azide. With both DMPO-OH and TEMP-O radicals in the presence and absence of radical scavengers, singlet oxygen was observed to be the key species formed in the room-light sensitized goethite suspension. In the goethite/H₂O₂ system; however, both OH and singlet oxygen were generated, with significant portions of DMPO-OH resulting from both OH and singlet oxygen. In fact, the DMPO-OH resulting from OH should be carefully calculated by correcting for the amount of DMPO-OH due to singlet oxygen. This study reports, for the first time, that the goethite suspensions may also act as a natural sensitizer, such as fulvic acids, to form singlet oxygen.     

A possible simplification of the Goss-modified Abraham solvation equation

Abraham solvation equations find widespread use in environmental chemistry and pharmaco-chemistry. Recently Goss proposed a modified Abraham solvation equation. For various partitioning processes, the present study investigates the consequences for the fit when the Abraham solvation parameter V is left out of this modified solvation equation. For air-organic solvent partition, the Abraham solvation parameter V can be omitted from the Goss-modified Abraham solvation equation without any loss of statistical quality. For air–water partitioning, organic biphasic system partitioning, as well as water-organic solvent partitioning, omitting the V parameter from the Goss-modified Abraham solvation equation leads to only a small deterioration of statistic quality.     

Chemisorption of hydrogen sulphide and methanethiol by light expanded clay aggregates (Leca)

Removal of volatile sulphur compounds from livestock waste air by biological air filtration may be enhanced by application of packing materials with reactive properties. In this study, light expanded clay aggregates (Leca®) was tested with respect to sorption and potential chemical degradation of H₂S, Methanethiol (MT) and Dimethyl sulphide (DMS). Leca was selected due to its content of minerals, including iron, and due to its high specific surface area. The performance of Leca was evaluated based on breakthrough curves and by comparing the difference between the inlet and outlet gas concentrations. Whereas DMS did not appear to be removed by Leca, both H₂S and MT were removed with variable efficiency depending on the specific conditions. Dimethyl disulphide (DMDS) and dimethyl trisulphide (DMTS) were demonstrated to be produced during the degradation process in relatively high yields. A comparison between ambient air and nitrogen gas conditions showed that the chemisorption of H₂S and MT did not necessarily need oxygen to be present. X-ray analysis of Leca showed an abundance of Fe₂O₃. It is therefore hypothesized that Fe₂O₃ in Leca can remove H₂S and MT by chemisorption. Both air velocity and moisture content clearly affected the capacity of Leca for removal of H₂S and MT. Lower removal is seen at higher air velocities, whereas higher moisture content enhances removal. However, chemisorption of MT by Leca appears to be limited above a threshold moisture level. Potential reaction mechanisms are discussed in relation to the observed effects. The results implicate that Leca can be used as a filter material with reactive properties provided that moisture content is controlled and that an adequate air velocity is used.